Find Verified Wire Mesh Gratings Suppliers, Manufacturers and Wholesalers

Trench Mesh

All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place. 

Trench mesh is designated as x-L8TM, x-L11TM or x-L12TM. The x is the number of main bars.

Application:
1. Home building fence
2. Home garden fence
3. Residential fence
4. Home animal fence
5. Home outdoor fence
6. Fences In Parks, Zoos and nature reserves
1.Material: low carbon steel wire
2.Coated: electric galvanizing, hot-dipped galvanizing, PVC spraying and PVC coating
3.Color: Standard colors are Green RAL6005 and Black RAL9005. Dark Green,Yellow ,etc .Other colors are available on request.
4.Features: corrosion resistance, aging resistance, sunshine resistance and weather resistance

According to different material and surface treatment. There is Hot-dip Galvanized Welded Wire Mesh, electro Galvanized Welded Wire Mesh, Re-drawing Welded Wire Mesh, PVC coated Welded Wire Mesh.

According to different produce process. There is Welded Wire Fence rolls, Welded Wire Mesh Panel and Welded Mesh Fence Panels.

Here is details of 1'' Welded Wire Mesh:

Material: Low carbon Steel Wire, Galvanized Iron Wire, re-drawing Iron Wire.

Hole patterns: Square hole

Mesh size: 25.4mmx25.4mm

Color: Silver

Width: 0.5m to 2.0m

Length: 5m to 30m.

The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars.

For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin.

We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).

Wall Spikes are a simple yet effective method of enhancing the security of an existing wall or security fence.
The wall spikes are easy to install and come in a variety of coatings or finishes.

Follows Contours of Wall

Neat Appearance
Easy to Install
Low Cost
Effective Intrusion Deterrent

Wall Spike (Big Size)
Material:Galvanized zinc steel plate ,stainless steel plate ,Gal+Polyester coating,color can be desighed according to the customers need .
Production process :The goods ,here we called wall spike was produced through an special die with skill of one-time
molding by using ourself-developed automatic production equipment.The bending strength is greatly increased by use of ribs on the bend .
Also the protect function was improved
.The productivity and quality are more superiors than manual when using our machines .Rate of qualified products can catch up to 98%.
Characterristics:With good protect function,beautiful appearance, easy to install ,economical cost.
Application :Gardens and apartment, offical buildings,prison ,border by installed on the wall or steel fence with expansion screw .
Thickness :2mm
Length :1m,1.25m,1.5m,2m(can adjusting depends on request)
Packing:Carton box +pallet (30 pieces per carton)
The use of ribs on the bend have greatly improved the bending strengh,not east to fold and break off, whice have been national patented .(Patent NO:2015204324207)

HR-A1 STYLE BIG WALL SPIKE(HAVE STOCKS)


Thickness: 2mm

Weight: 1.75kg/pcs

Barb Length: 110mm

Barb Spcaing: 78.3mm

Bottom Width: 50mm

Material: Hot Galvanized; PVC; Electrophoretic; Stainless steel 304.

Packing: 30pcs/carton

Length: As your required.
Normal Length: 1.25m; 1.28m.

Hexagonal Wire Nettings Produced With Superior Quality Low-Carbon Iron Wire,Normally Galvanized Plastic Coated For Long Life,The Mesh Is Firm In Structure And Has Flat Surface.Hexagonal Wire Netting Is Exensively Used In Industrial And Agricultural Constructions.Also It Can Be Used As Fence For Poultry Cage. Fishing, Garden, Children Playground And Christmas Decorations.

HEX.Wire Netting In Normal Twist

(IN 5m,10m,25m,30m,100m,TO 3000m ROLL,WIDTH OF 0.5m-2.0m)

MESH

WIRE GAUGE

INCH

MM

BWG

3/8

10MM

27, 26, 25, 24, 23, 22, 21

1/2

13MM

27, 26, 25, 24, 23, 22, 21, 20

5/8

16MM

27, 26, 25, 24, 23, 22

3/4

20MM

25, 24, 23, 22, 21, 20, 19

1

25MM

25, 24, 23, 22, 21, 20, 19, 18

1-1/4

30MM

22, 21, 20, 19, 18

1-1/2

40MM

22, 21, 20, 19, 18, 17

2

50MM

22, 21, 20, 19, 18, 17, 16, 15, 14

3

75MM

21, 20, 19, 18, 17, 16, 15, 14

4

100MM

17, 16, 15, 14

HEX.WIRE NETTING IN NORMAL TWIST

(IN 5m,10m,25m,30m,100m,TO 3000m ROLL,WIDTH OF 0.5m-2.0m)

MESH

WIRE GAUGE

INCH

MM

(BWG)

1

25MM

22, 21, 20, 19, 18

1-1/4

30MM

22, 21, 20, 19, 18

1-1/2

40MM

20, 19, 18,17

2

50MM

20, 19, 18,17,16

3

75MM

20, 19, 18,17,16

HEX.WIRE NETTING IN PVC-COATED

(IN LENGTH OF 5M,10M,25M,30M,WIDTH OF 0.5M,1.0M,1.2M,1.5M)

MESH

WIRE GUAGE

1/2

13MM

0.9MM,1.0MM

5/8

16MM

0.9MM,1.0MM

3/4

19MM

0.9MM,1.0MM

1

25MM

1.0MM,1.2MM,1.4MM

1-1/2

40MM

1.0MM,1.2MM,1.4MM,1.6MM

2

50MM

1.0MM,1.2MM,1.4MM,1.6MM,2.0MM

Packing: In Roll Wrapped By Water-Proof, Or Shrink Wrapped.

Remark: Sizes Other Than Those Above-Mentioned May Be Made To Order After Consideration.

Common Carton: It Can Protect The Inner Goods And Easy To Handle, Transport And Stock.

Mini Roll Normally In The Length Of 3m,5m And 10m,Shrink Wrapped With Color Label And Barcode,Then Into Cartons,They Are Ideal For Pet Cage,Window Prodection,Tree Guard,Other Home And Garden Usage

Cattle wire fence is manufactured in a wide selection of heights and styles featuring a graduated spacing that starts with small openings at the bottom whch helps prevent entry from small animals.the hinge-lock knot allows the fencing to give under pressure ensures a solid construction over any terrain,our field fence is designed using a variety of spacing configurations to accommodate horses,cattle,hogs and other large animals.

Application:
It is essential to feed cattle sheep horse in agriculture farm and grassland also as barriers against deer and wild animals ,in galvanized or PE coated wire material,but with time going, the cattle wire fence more and more used in different situation
Specification:

Mesh Detail

Weight(KG)

Top/rockwire dia (mm)

Mesh wire

dia (mm)

Stype

Size (mm)

7/150/813/50

102+114+127+140+152+178

19.3

2.5

2.0

8/150/902/50

89+102+114+127+140+152+178

21.6

2.5

2.0

9/150/991/50

89*2+102+114+127+140+152+178

23.9

2.5

2.0

10/150/1194/50

89*2+102+114+127+140+152+178+203

27.3

2.5

2.0

11/150/1422/50

89*2+102+114+127+140+152+178+203+229

30.8

2.5

2.0

12/150/2400/50

100*15+150*2+200+3

55.2

2.5

2.0

This Hexagonal Wire Mesh offered by Hitesh Metal is an electric fusion welded prefabricated joined grid consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing. It is also used in mines, gardening, machine protection and other decorations.

This Welding Wire Mesh offered by Hitesh Metal is widely used in agricultural, industrial, transportation, horticultural and food procuring sectors. The sizes are specified by combining the spacing, in inches or mm, and the wire cross section area in hundredths of square inches or mm.

Our Netting Wire Mesh is a square grid of uniformly placed wires, welded at all intersections, and meeting the requirements of ASTM or other standards. Machines are used to produce the mesh with precise dimensional control, where the product can result in considerable savings in time, labour and money.

Our range of Fencing Wire Mesh is designed and developed in conformation with set industrial standards and meet international quality norms. Hitesh Metal also offer these in different sizes, shapes and designs as per customers specifications at affordable rates.

Being a noteworthy enterprise of this industry, we Hitesh Metal. are Manufacturing & Exporting a wide spectrum of Stainless Steel Wire Mesh.

The Stainless Steel Wire Mesh we offer made by using high grade quality Stainless Steel thus known for their Corrosion resistant nature, Excellent finishing, High quality, Ability to withstand temperature variations, Heat-resistant, Reasonable price. These wire mesh are widely appreciated in industrial Apllications such as Machine Manufacturing units, Construction Secto, Filtration Applications, Oil & Chemical Industries, Pharma Industries,Food Industries

With our expertise in this domain, we Hitesh Metal. are able to manufacture & Export a superior quality range of Brass Wire Mesh. All our products are available in various sizes, designs, and shapes at market leading prices to meet the demands of customers.

Our range of Brass Wire Mesh has gained appreciation from the clients due to its abrasion & corrosion resistance, higher strength and lower electrical conductivity. These are widely used for sieving various pellet, porcelain clay & glass, powder, chinaware printing, filtering liquid and gas.

Specification for Brass Alloy Wire Mesh

Mesh Wire Dia.(Mm) Opening(Mm)
SWG MM Inch
6 22 0.711 0.028 3.522
8 23 0.610 0.024 2.565
10 25 0.508 0.020 2.032
12 26 0.457 0.018 1.660
14 27 0.417 0.016 1.397
16 29 0.345 0.014 1.243
18 30 0.315 0.012 1.096
20 30 0.315 0.0124 0.955
22 30 0.315 0.0124 0.840
24 0 0.315 0.0124 0.743
26 31 0.295 0.0116 0.682
28 31 0.295 0.0116 0.612
30 32 0.247 0.011 0.573
32 33 0.254 0.010 0.540
34 34 0.234 0.0092 0.513
36 34 0.234 0.0092 0.472
38 35 0.213 0.0084 0.455
40 36 0.193 0.0076 0.442
42 36 0.193 0.0076 0.412
44 37 0.173 0.0068 0.404
46 37 0.173 0.0068 0.404
48 37 0.173 0.0068 0.356
50 37 0.173 0.0068 0.335
60x50 36 0.193 0.0076
60x50 37 0.173 0.0068
60 37 0.173 0.0068 0.250
70 39 0.132 0.0052 0.231
80 40 0.122 0.0048 0.196
90 41 0.112 0.0044 0.170
100 42 0.102 0.004 0.152
120x108 43 0.091 0.0036
120 44 0.081 0.0032 0.131
140 46 0.061 0.0024 0.120
150 46 0.061 0.0024 0.108
160 46 0.061 0.0024 0.098
180 47 0.051 0.002 0.090
200 47 0.051 0.002 0.076

With genuine intentions to enhance our reputation in the national & international market, we Hitesh Metal. Manufacturer & export an exceptional quality wide range of Nickel Wire Mesh. The wire mesh which we offer is widely valued for their long lasting service and wide uses.

Nickel 200/201 Wire Mesh is technically pure nickel with good mechanical properties and excellent resistance to alkali hydroxides as well as organic compositions. Nickel 200/201 Wire Mesh is a multipurpose grade and is used in application where alloys are not essential. It also has good magnetic and magnetostrictive properties, high thermal and electrical conductivity as well as low gas content in the electronics industry.

We Hitesh Metal. have gained expertise in manufacturing & exporting a supreme quality of Phosphor Bronze Wire Mesh. Our range has gained appreciation from the clients due to its abrasion & corrosion resistance, higher strength and lower electrical conductivity.

The wire mesh manufactured and supplied to our customer is thoroughly checked and tested. we take into consideration every minute detail while manufacturing these wire meshes, whether it is uniform mesh counting or uniform wire thickness or strength of the wire mesh.

We Hitesh Metal. involved in manufacturing & exporting a wide array of Black Wire Mesh to cater the variegated requirements of the customers worldwide. These Black Wire Mesh are manufactured using premium grade raw material that is specially tested before manufacturing the final assortment

These Black Wire Mesh are made from very high quality raw material which ensures high durability at its user end. These Black Wire Mesh are in high demand in the market. Different sizes and designs are easily available in the market.

Features

Good strength
Uniform mesh
Fine rigidity
Specification for Black Wire Mesh

Mesh Wire Dia.( Mm) Opening (Mm)
8 0.71 2.47
10 0.65 1.89
12 0.60 1.52
14 0.50 1.31
16 0.40 1.19
20 0.40 0.87
24 0.35 0.71
30 0.30 0.55
40 0.25 0.39
50 0.20 0.31
60 0.17 0.25
80X70 0.135 -
100X90 0.11

With firm commitment to quality, we Hitesh Metal. are engaged in Manufacturing & Exporting a quality-assured array of Star Insect Screen. With state-of-the-art infrastructure facilities we procure these product by using optimum quality material.

Our offered ranges of Insect Screen is widely used to prevent insects from entering the home, used in hotel, restaurant, communal building and residential houses to prevent the common insects or birds. These have aesthetic appearance and are offered in different options of size, range and colors.

Features

Light Weight
Good corrosion resisting and Rust resisting
Precisely designed
High grade material
Excellent finish
Size Specification for Star Insect Wire Mesh

Mesh Size Grade Guage
13*28.5 202,304,316(S.S) 0.33
16*23 202,304,316(S.S) 0.71
16*34 202,304,316(S.S) 0.22
14*30 202,304,316(S.S) 0.29
16*30 202,304,316(S.S) 0.30
Star Insect Wire Cloth Dutch Weave
Mesh Wire Dia.(mm)
12X64 0.58/0.64
14X88 0.50/0.33
24X110 0.36/0.25
30X150 0.23/0.18
40X200 0.18/0.13

Weft and warp weaved and combined soft with rigi, wire mesh can be widely applied to the decoration industry to create any effect the designer can dream.

Cable metal mesh is a kind of decorative metal mesh.
The cable metal mesh is combined with braided steel cables and steel rod.
Commonly the warp wire is steel cables and the weft wire is steel rod.
Materials : stainless steel is more popular, aluminum, brass wire and copper wire,
phosphor bronze, and other materials can also be customized.
Vertical wire dia:0.5-2.5mm
Horizontal wire dia:1.5~8mm
Main parts: cable mesh , cable rod, cable pitch, rod pitch.

Size: 30*35cm,30*60cm,35*60cm,50*70cm,100*70cm,100*80cm,82.5*120cm, other size could be customized.
Type: Stainless Steel ferrule type
Weight: according to cable diameter and hole size / aperture
Packing: export standard carton / wooden case
Specifications: Cable diameter: 1.0mm,1.2mm,1.5mm,1.6mm, other size could be customized
Color: Black, stainless steel original color

Material about welded wire mesh
Electro galvanized wire, hot-dipped galvanized,PVC coated.
We choose the best low carbon wire or stainless steel wire material available in China. The high quality & reasonable price product is from the right material.
Electro galvanized
Electro galvanizing, uniform coating and thin thickness. Coating are usually only 3-15 microns with bright appearance. Common electro galvanized wire on zinc amount is 8-13 g/m�².
Hot-dipped galvanized
Hot-dipped galvanized, coated thickness and nonuniform coating. Coating are usually 45-300 microns with darker color and good corrosion resistance. Hot-dip galvanized wire amout of zinc: 30-60 g/m²

Stainless Steel Wire Mesh Reverse Dutch Woven Cloth for Plastic Extruder Screen is a kind of stainless steel woven wire mesh. the larger count of wires is found in the warp and the smaller count in the shute, thus reversing the method used in plain dutch weave, twilled dutch weaves.
Reverse Dutch weave wire cloth is woven using two sizes of wire. Smaller wires are used in the warp direction and are woven with a larger wire. The smaller wires are woven tightly together, providing a tight mesh for filtering. The larger wire provides strength to the mesh. The primary uses of this wire cloth are filtration and separation of liquid and slurry products.

Stainless steel mesh cloth also known as stainless steel wire cloth, stainless steel filter.

Stainless steel mesh cloth with stainless steel wire woven in accordance with the order of longitude and latitude, mesh can be according to the size of mesh and wire diameter to distinguish the specifications.

Stainless wire mesh is especially useful because it is extremely chemical resistant, works with hot or cold liquids, and is easily cleaned.

Etching mesh refers to the hollow mesh formed by etching metal plates using corrosive liquids or laser engraving. Used for integrated circuit printing, fluorescent screen electronic grid, precision filter, microelectrode components, etc.Etching metal mesh also named photo-etching metal product, metal etching mesh, photoelectric etching metal mesh. We can make customized etching metal mesh according to your drawing. Combined with advanced photo-etching and other process technologies, our etching metal mesh has advanced and irreplaceable advantages over traditional stamping and electroforming.

Stainless steel rope net is a net-like product processed by stainless steel rope according to certain methods and procedures. The common ones are mainly stainless steel buckle rope net and stainless steel braided rope net. The stainless steel buckle rope net is extruded and woven by stainless steel wire rope and stainless steel buckle.The steel buckle is mainly made of stainless steel buckle, and there are also aluminum buckles and copper buckles for customers to choose from.The stainless steel rope mesh woven net is formed by cross-weaving with a plurality of steel wire ropes, and the net is durable and unbreakable, and the bearing capacity is large.