The gabion mesh machine is the professional equipment that produces hexagonal wire netting, its product extensively used for petroleum, building, farming and chemical engineering industry, keep warm piping and other piping, be also used for rounding column, residence and park greening safeguard etc..
Gabion mesh is still more available to manufacture the gabion mesh box and extensively used for safeguard and backing sea dike, hillside, road bridge and reservoir and others, it is the best material of the flood control at the same time.
gabion mesh making machine
1.Wire diameter:2-4mm
2.The Max.width:4.3m
3.Mesh size : 80x100 mm
4.ISO9001:2000
We can produce the high quality screen that matching world famous shale shakers, such as derrick flc flat screen, derrick flc pyramid screen, brandt screen, swaco mongoose screen, swaco als screen. And we can manufacture various sizes shale shaker according to the customers' requirements.
Woven wire is versatile and easily adapted to special uses and conditions. It is fabricated from drawn or rolled sections in standard or special materials. In open mesh constructions such as partitions, guards and grilles, it has long been accepted and specified for outstanding quality and durability. Woven wire in the above form and construction, being mostly portable, is unexcelled where conditions such as ventilation, lighting, vision and fire-proofed materials are prime requisites. Stainless steel mesh is used use on a oil catch muffler for vacuum trucks. Woven wire of any gauge from fine to coarse can meet the particular need of any open mesh requirement that may be presented to the fabricator.
Custom fabrication of square and diamond meshes for wire mesh partitions, fill panels, wire mesh railings, window guards and other architectural woven wire products are also in our product line.
How to order woven wire mesh:
Identity the wire diameter for woven wire products
Roll length of the woven wire or piece length
Roll width of the woven wire or piece width
Opening area of the woven wire mesh
Filtration of the woven wire cloth
Minimum quantity needed
Packing for woven wire mesh
Woven wire mesh and wire cloth in stainless steel or other metals are mainly used as filter wire mesh, filter wire cloth or wire mesh screen. Stainless steel wire mesh is also written as stainless steel mesh, stainless wire mesh, stainless steel wire mesh cloth, stainless steel mesh screen, stainless steel wire netting mesh or stainless steel woven mesh. We introduce stainless steel wire mesh and information on stainless steel woven wire mesh and materials here.
Type 304 Often referred to as "18-8" (18% chromium, 8% nickel) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
Type 304 L
Stainless Steel Wire Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.
Type 316
Stainless Steel Wire Type 316 is stabilized by the addition of 2% molybdenum, T-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.
Wire cloth woven of stainless steel wire T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.
Type 316 L
Type 316 L Stainless Steel Wire is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.
Applications of Stainless Steel Woven Wire Mesh and Wire Cloth: Sifting and filtering in acid and alkali conditions. Slurry net in petroleum, sifting and screening mesh in chemical and chemical fiber industry, acid washing mesh in electric plating industry.
Besides stainless steel woven wire mesh and wire cloth, we also provides stainless steel welded wire mesh.
Welded wire mesh is traditionally utilized as guards in buildings and factories, as animal enclosure and fence in agriculture; it is also used in horticulture industry as tree guards, plant protection as well as other uses.
Advantages of stainless steel welded wire mesh:
Stainless steel welded wire mesh enjoys excellent corrosion resistance, beautiful look, longer work time, when compared with galvanized welded iron wire mesh or pvc coated welded iron wire mesh, which can compensate for its seemingly higher cost.
We supply stainless steel welded wire mesh made with wire diameter from 1.2mm to 0.65mm, at roll width from 0.4m to 1.8m and length at customers request, mainly for export.
Black wire cloth is made of mild steel wire, in plain weave or twilled dutch weave, also known as low carbon steel wire cloth, mild steel wire mesh. This kind of wire mesh products are mainly used in filtration of rubber industry, plastic industry and grain.
Stainless steel :stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth.T304 is the most common, but other are used in specific applications to take advantage of each grade's unique properties. The wire mesh made of stainless steel is extensively used in mining , chemical industry, food industry and pharmaceutical industry.
Our stainless steel wire mesh products are generally made of stainless steel type 302, 304, 304l, 316, 316l, 321 and 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers pecific requirements, such as the material, the wire diameter, the size of the mesh , width and length.
Plain weave: each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.
Characteristics: square aperture , high flow through , relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration up to 63 m.
We can supply super quality Electro Galvanized Iron Wire/ Hot Dipped Galvanized Wire processed with low/hign carbon steel wire, through drawing and electro galvanized,
Electro/Hot Dipped Galvanized Wire Technical/Mechanical Characters:
ASTM Standard: A641/A641M-98
Material: SAE1006/1008,Q195/235 SAE1050/1065
Standard wire gauge BWG6 to BWG25.
Zinc coating: 8-25g/sqm for Electro Galvanized Wire; 60g - 220g/sqm for Hot Dipped Galvanized Wire
Heavy coating: >200grams/sq.m or according to our customers' requirement >250grams/sq.m
T.S.: 300/550Mpa, 350/450Mpa, 450-550Mpa, 600-800Mpa, 700-900Mpa 1100-1300Mpa, 1300-1700Mpa etc.
Packing: 1kg-1000kgs/coil
Application: This kind of wire is extensively used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.
Jt technology provides ecg cables and leadwires that are shielded and constructed to meet the standards for low triboelectric noise. Our cable jackets are made of medical grade tpu for durability and good flex life. For conducting materials, they are made of special materials in order to provide good physical and electrical performance. For defibrillation applications, appropriate resistors can be incorporated into the cable assembly and meet the 5kv lead-to-lead requirement of iec60601-2-4. All ecg cables and leadwires are fully tested in compliance of ansi/aami, ec53-1995 standards.
Wire diameter for welded steel bar panels:
ranges from 5mm to 12mm
Welded bar panels opening:
50mm to 300mm
Panel length:
100cm to 1200cm
Panel width:
100cm to 300cm
Brief Introduction of Wire Mesh Cable Tray Systems:
These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.
Features and Benefits of Wire Mesh Cable Trays:
1. Electroplated Zinc Finish
2. Fast Easy Installation
3. Mesh Design Allows Cable Exit or Entry at any point
4. Clear Cable Identification
5. Supplied in 3 Metre Lengths
6. Significant Cost Savings Compared to Standard Tray Products
7. Simple Creation of Fittings on Site
8. Wide Range of Sizes
9. Heights Shown are Internal Dimensions
Manufacturing:
Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP)
Mode: Top curved / Top Straight
Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated.
Color: Optional
Suggestions:
1). MATERIAL
The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed.
2). SURFACE FINISH:
A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free.
B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays.
C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site.
D). Pickled & Passivated should be used to stainless steel wire trays.
Specification for power and communications cabling containment.
1). SCOPE
Steel Wire Cable Tray conforming to the material and performance of this specification.
2). GENERAL
A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment.
B). Surface Treatments:
i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2)
ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729.
iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L)
C). Steel Wire Cable Tray Widths & Depths
i). Cable Tray dimensions are all internal.
ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm
iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm.
iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm
All trays are of 3005mm long
3). SPECIFICATION
a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -:
4 mm for trays of widths up to 150mm
4.5 mm for trays of widths of 200mm
5.0 mm for trays of widths of 300mm
6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm
b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050)
c). Trays will be constructed with a 50mm x 100mm mesh configuration.
d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray.
e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray.
f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld.
4. TESTS, CERTIFICATION AND CONFORMITY
a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537.
b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification.
c). Fire test certification should be published in accordance with the E30/E90 standard.
d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result.
We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays.
SHANGHAI SHANGSHAI BOLTING CLOTH MANUFACTURING CO., LTD is a professional manufacturer of all kinds of Screen Printing Mesh, Filter Mesh and Flour Mesh, established in 1997.
Our company has 3 factories, the largest one is located in ANPING, HEBEI, is a recommended enterprise of the HEBEI Government. The factory in Hebei covers 119 ACRES (79,373 square meters), the two other factories are located in Shanghai.
Mainly Products: Polyester Mesh, Terylene Mesh, Nylon Mesh, Polyamide Mesh, Flour Mesh, Stainless Steel Mesh, Iron Wire Mesh, Filter Mesh, etc. screen printing and filteration related products.
2.Application:
1.Equipments: 300 SWISS SULZER RUTI weaving machines, 5 Benninger high speed warping machines, 2 water washing heat setting machines. The width of weaving machines: 280cm, 330cm, 360cm, 390cm.
2.Exported Countries: America, Germany, Japan, Britain, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand,etc all over the world.
3.Usage:It is widely used in bolting, filter, textile printed and dyeing, printing plate, electronic printing, ceramics, glass printing,the industries of petroleum, chemical, metallurgy, cement, environmental dedusting and mine. The fabric has been brushed, so it is more flexible and thicker,the dedusting efficiency can reach 99.99%.
3. Features & Advantages
1) Imported weaving and warping machines from Switerland or Italy make sure the high quality products and the production.
2) We produce variouse of polyesters mesh, nylon mesh and some other stainless steel mesh for printing and filtering. Our products are widely applied in high-density printed circuit boards, CDs, keyboard, ceramics, printing of T-shirt textiles, printing on glasses, and adadvertisement signpost making etc.. They also serve as filter in aerospace, petrifaction and other high technology regime
Concrete slab mesh is reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses. For example, block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Variety: truss mesh reinforcement.
Ladder mesh reinforcement.
Available material: hot dipped galvanized, electro galvanized or stainless steel.
Brick wall reinforcement mesh is welded wire sheet for reinforced concrete construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface.
Wire diameter: 2.5-6.0 mm
Width: 5cm-27cm
Length: 3mm.
Spacing: 40cm
Surface treatment: welded after hot dipped galvanized, welded after electro galvanized, welded before electro galvanized, welded before hot dipped galvanized, welded by stainless steel wire.
We have two types of brick wall reinforcement mesh: truss-mesh reinforcement and ladder-mesh reinforcement.
Package: carton/pallet/plastic wrapped.
Package: carton/pallet/plastic wrapped.
5775 Wire Cable Harness Wire Mesh Suppliers
Short on time? Let Wire Cable Harness Wire Mesh sellers contact you.
