Concertina barbed tape (CBT), Barbed tape obstacle (BTO) Hongli metal mainly produce single coil razor wire, cross type razor wire, concertina razor wire, razor wire barrier, flat wrap razor wire. Packed in waterproof paper and outside woven cloth, we can also produce it as per customer's requirements.
Hot dipped Galvanized iron wire:8--36(3.8mm,0.19mm).
I and basic parameters: Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire. Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) - Gap: 0.1 mm - 35mm deviation: + 0.05 mm standard length: 50-6000mm End connections: silk buckle pipe head or direct pipe head Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root. Special specifications on request (such as: in liquid, reflexed, etc.). II and features: 1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid 2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation. III, the properties of product: 1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable. 2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors. 3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering. I, product use Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available. II, structure characteristics Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools. III, technical parameters 1. Specifications Nominal size 2. Silk around width (gap) coefficient as follows: (units) mm: 0.1 0.15 0.20 0.25 0.30 0.35 0.40 0.45.50 0.75 1.00 1.25 3. Length factor as follows: (units) mm: 1000 1200 2000 4000 6000 IV, tie-in way Welded loop joint thread silk buckle joint flange joint V, sieve tube material Stainless steel wire low carbon steel wire galvanized steel wireVI, filtration method Inside filter outside filtering (evaginate reflexed round wire evaginate).
I and basic parameters: Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire. Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) - Gap: 0.1 mm - 35mm deviation: + 0.05 mm Standard length: 50-6000mm End connections: silk buckle pipe head or direct pipe head Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc Torre bar specification: 3.8 mm / 22 root, 3.8 mm / 32 root, 3.8 mm / 48 root, 3.8 mm / 50 root Special specifications on request (such as: in liquid, reflexed, etc.). II and features: 1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid 2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation. III, the properties of product: 1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable. 2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors. 3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering. I, product use Used for various pumping oil, gas and water Wells played sand protection, prolong production cycle pump function, improve productivity, wastewater treatment and chemical branch are available. II, structure characteristics Around the welding type stainless steel sieve tube is "V" type by large openings, 1Cr18Ni9Ti forming welded wire around the system, it is through control round wire the gaps between the role play sand control, around the welding stainless steel sieve tube with other types of sand control tube comparison, specific have higher flow capacity, high strength, corrosion resistance is out of shape not easily long life, safe and reliable, obvious effect, low cost, is a bit oil industry in the most effective sand control tools. III, technical parameters
Woven Mesh Gabion Boxes Description: Woven mesh gabion boxes are hexagonal and double-twisted wire-mesh structures. The gabion boxes are divided into chambers by inserting diaphragms into every meter. The wire used for making the boxes is thickly plated mild steel. The gabion units are delivered to the site flat-packed. The double-twisted mesh connections of the woven mesh prevent from coming apart if the wire is cut or snaped, in each case, the location of the fault is restricted to the neighbouring areas. The units are attached to each other when using stitching wire and/or staples. Technical Characteristics: The mesh/wire versions generally used are summarised in the table below. In order to reinforce the structure, all edges are strengthened with a thicker wire. For the sizes and size tolerances about different versions, please see the dimensions below: Length (m) Width (m) Height (m) 1,0 0,5 0,5 1,5 1 0,5 2 1 0,5 3 1 0,5 4 1 0,5 1,5 1 1 2 1 1 3 1 1 4 1 1 Wire-mesh hole size 80 x 100 mm Wire size 2,7 mm Size tolerance of structures Lenght 1,5 - 2,0 - 3,0 - 4,0 m ¡À 3% Width 0,50 - 1,0 m ¡À 5% Height 0,5 - 1,0 m ¡À 5%.
I and basic parameters: Materials: stainless steel 302,304,316,304 L, 316L sieve wire or low carbon steel galvanized wire. Outer diameter: 4 inches, 6 inches, 8 inch, 10 inch, and 12 inches, etc. (20mm 1000mm) - Gap: 0.1 mm - 35mm deviation: + 0.05 mm Standard length: 50-6000mm End connections: silk buckle pipe head or direct pipe head Sieve silk specification: 2.2x 3.0 mm, 2.3 * 3.0 mm, 3.0 * 4.6 mm, 3.0 * 5.0 mm, etc Torre bar specification: 3.8 mm round wire or trapezoidal silk II and features: 1. Sift the cross-section are trapezoid. The width values dimension wedge graphics a 1.3, 1.6, 1.8, 2.0 and 3.0 2.2, 2.5, etc, due to sift the section for trapezoid, so aperture is always within the small, favourable filtering and washing. (against) in liquid 2 the section steel bar, circular wedge, shape, according to the user's different USES, can with screening the multiple collocation. III, the properties of product: 1.the stable structure, high temperature corrosion resistance, mechanical performance is good, long service life, safe and reliable. 2 joints can be made into parallel joints, the common thread joint, taper tooth joints and trapezoidal tooth connectors. 3. Mainly used in oil, gas and water Wells sand control, mud filtering and other more medium can also be used in water treatment, water softening, petroleum products during terminal filtration and chemical acid organic solution of recycling filtering.
Welded panels are made of superior quality welded mesh, with flat even surface, firm structure, be used extensively in building, food, agriculture and so on. Assortments available: Stainless steel welded panels Galvanized welded panels Hot-dipped galvanized welded panels. Mesh size Wire diameter Panel width & length In mm In inch Mm 12.7mm 1/2’’x1/2’’ 1.0mm - 2.0mm 3feet x 6feet 4feet x 8feet 5feet x 10feet 1m x 2m 1.5m x 3m 2m x 4m Other panel sizes can also be made according to request 25.4mm 1’’x1’’ 1.5mm - 3.5mm 38.1mm 1 1/2’’x1 1/2’’ 2.0mm - 5.0mm 50.8mm 2’’x2’’ 2.0mm - 6.0mm 76.2mm 3’’x3’’ 3.0mm - 7.0mm 101.6mm 4’’x4’’ 3.0mm - 8.0mm 127mm 5’’x5’’ 4.0mm - 9.0mm 152.4mm 6’’x6’’ 4.0mm - 10.0mm.
Wire Materials: Quality mild steel wire, stainless steel wire, etc. Weaving Patterns: Straight twist, reverse twist, double twist. Process: Galvanized after weaving or galvanized before weaving. Finish: Electric galvanizing, hot-dip zinc plating, stainless steel or PVC coated. Color: PVC coated hexagonal wire mesh is green, white, grey or other colors; enamelled hexagonal wire mesh is green. General Use: Hexagonal wire mesh with its good corrosion resistance and oxidation resistance, serves well as strengthing, protection and temperature keeping materials in the form of mesh container, stone cage, isolation wall, boiler cover or poultry fence in construction, petroleum, chemical, breeding, garden and food processing industries. Specification Diameter(BWG) Aperture 1.5CM1/2" 22 limit:2M,single or double edge 24 2CM3/4" 20 width limit:2M,single or double or strong edge 22 24 1.8CM5/8" 21 limit:4',single or double edge 23 25 2.5CM1" 19 width limit:2M,straight or reversed twist 21 23 3CM1.25" 19 width limit:2M,straight or reversed twist 21 4CM1.5" 18 width limit:2M 20 22 5CM2" 18 width limit:2M 20 22.
Easy leakage, wear and corrosion resistance.
Materials: stainless steel expanded, iron plate, copper plate, aluminum plate. Used: widely used in thecore of filter, medicine filtering, breed, battery, mechanical protecting,making the crafts, the meshes for the high-grade sound box, decorate, theseating for children, small basket and basket. Specification: (1) long way of mesh:4.5 100mm (2) short way of mesh:2.550mm (3) thickness:0.5-8mm (4) expanded metal mesh at length from 1-30m and widthfrom 600-2000mm.
Perforated metal sheet is used for oil filters, as fencing screen for expressway, railway and other construction facilities, used in workshops as well as other constructions as sound isolation sheet, decorative sheet for stairs, environmental tables and chairs, sifting in grains, feed and mines. Perforated metal screen sheet is also used in making of kitchenware such as fruit basket, food cover, etc. Perforated metal Hole size: 0.1-100mm Thickness: 0.1-8.0mm Width: 0.1-1.5m Length: 4mà
Perforated Size: From 3 mm. to 120 mm. Sheet Thickness: From 0,5 mm to 5 mm. (depending on perforation). Size: 2.000 mm. wide in sheets (depending on perforation). 1.500 mm. wide in roll (depending on perforation). The maximum width we can provide for perforated metal up to is 2mt, the preferred maximum is 1.5mt. The maximum length we can perforate up to is 6mt, the preferred maximum is 4mt. The most common material types are mild steel, Pre-galvanised mild steel, stainless steel, aluminum, brass, etc. Perforated metal is used in many applications such balustrade infill, acoustics, security screens, air-condition units, radiator covers, screening, and display units The maximum width we can provide for perforated metal up to is 2mt, the preferred maximum is 1.5mt.
Welded Wire Mesh 1>Hot dip Galvanized before/after welded 2>Electro Galv. before/after welded 3>PVC Coated green,blue,black... Material: Galvanized Iron Wire PVC/Gl. welded wire mesh wire:0.5-5.0mm ISO9001:2000 length:0.5-2.0m,width:0.5-30m Mesh:1/4",3/8",1/2",5/8",3/4",1" ,2" Weaving and characteristics: Hot dipped galvanizing after weaving Weaving with hot dipped galvanized iron wire Electric galvanizing after weaving Weaving with electric galvanized iron wire PVC coated welded wire mesh Inside water-proof paper ,outside with plastic woven bag, or carton ,or tray or by customer
Weaving: plain weave, twill weave, bamboo-type weave, twist weave. Character: It is fine and have the stably performance. Uses: used in spaceflight, oil, chemical industry etc.
Welded wire mesh
Gabions are rectangular cages made of double twist hexagonal wire mesh, filled with appropriately sized rock. They are used as retaining walls, toe protection for slopes or as weirs. The flexibility of gabions allows significant deformation without affecting the structural integrity of a wall. If revegetation of a structure is required, the environmentally friendly nature of gabion cages does not impede this process. Gabions are available in the following standard sizes: L(m) x w(m) x h(m) 1m x1m x 1m 2m x 1.5m x 1m 2m x 0.5m x 0.5m 2m x 1m 0.5m 2m x 1m x 1m 4m x 1m x 0.5m 4m x 1m x 1m 6m x 2m x 0.5m
Crimped / double crimped wire mesh are of heaviest quality and accurate mesh which are made by spring steel, carbon steel, high tensile steel wires in different wire diameters generally used for screening, mines, quary industries, fabrication work etc. The perfect crimping insures the wire lock firmly together at the intersections. The opening and extra crimping is important. We provide the mesh with extra locking & tightness for less thickness wires. Specification list ofcrimped wire mesh/wire mesh for roast Wire gauge Swg Wire diameter Mm Mesh/inch aperture Mm Weight Kg/m2 14 2.0 21 1 4.2 8 4.05 18 1 15 25 0.50 20 0.61 2.6 23 0.61 18 0.8 3.4 24 0.55 16 0.1 2.5 24 0.55 14 0.12 4 22 0.71 12 0.14 2.94 19 1 2.3 0.18 1.45 6 4.8 1.2 2 20 6 4.8 1 2 20 6 4.8 0.7 3 14 14 2.0 5.08 0.3 12 14 2.0 2.1 1 2.5 14 2.0 3.6 1.5 1.9
Insects, mosquitoes and other undesirable airborne pests are a constant threat to both personal comfort and hygiene. We stock an extensive range of standard í«insect mesh for screening windows, doors and ventilation areas in homes, offices, hospitals, restaurants and other establishments where there is a potential problem. Uk building regulations now insist upon mesh screening to be fitted above soffit board ventilators, and we are able to supply our standard grades in strip form specifically for this purpose. Insect screen standard specifications Material type mesh no. (inch) aperture (w) mm dia (d) mm open area % mass (m) kgm2 Warp weft warp weft Aluminium 18 16 1.13 1.31 0.28 66 0.21 Galvanised steel 16 16 1.31 1.31 0.28 68 0.63 Stainless steel 16 16 1.31 1.31 0.28 68 0.63 20 20 0.19 24 24 0.12
Decorative wire mesh is made with super quality stainless steel, aluminum alloy, brass, copper or other alloy materials. Metal wire mesh fabrics are now catching the eyes of modern designers. It is widely used as curtains, screens for dining hall, isolation in hotels, ceiling decoration, Animal containment and security fencing, etc. With it's versatility, unique texture, variety of colors, durability and flexibility, metal wire mesh fabric offers a modern decoration style for constructions. When it is used as curtains, it offers a variety of color changes with light and gives unlimited imagination.
Welded stainless steel wire mesh panels.
