Agglomerated acid flux for welding of ordinary carbon manganese, low alloy structure and boiler quality steel in combination with appropriate SAW wire (such as EL8,EM12. EM12K). The flux suitable for high speed welding and provides very good weld bead appearance and excellent slag removal even with narrow groove and fillet welds. The other character of LJ-SJ501 is high resistance to cracking and porosity. Especially it is insensitive to oil, rust, scale and dirt on the surface to be welded. Most being applied to double-side with single pass weld and fillet welds. As the consumption of the flux is very low,it is very economical.
• Flux type: Aluminum-Rutile
• Basicity index: 0.5-0.8
• Grain size:2.0-0.28mm(10-60meshes)
Copper coated welding wire is the main product of welding wire. It is used very extensively, because of its good welding performance and higher efficiency in welding. And it is suitable for pure CO2 and argon and CO2 mixed gas as the shielded gas. Therefore, there are many factories that manufacture copper welding wire in the world.
The production process of copper coated welding wire is shown below: firstly, its raw material is wire rod. Secondly, the wire rod goes through two wire drawing process. Thirdly, the step is the copper plating line. Next, the wire is spooled by the wire winding machine. Then the welding wire is inspected and packed in different forms. Delivering the goods to customers is the last step.
Two baskets copper welding wire, one leans against another.
Basket-packaged copper welding wire has beautiful appearance.Copper welding wire winded on a black plastic spool orderly.
Spool-packaged copper welding wire is cheaper for extensive application.
Copper welding wire wrapped into a round shape with four strings bind.
Coil-packaged copper welding wire has the most simple package for seen directly.Drums wrapped into plastic film, placed on a wooden pallet, top wooden board, with strings fixed them into a whole.
Copper welding wire put into drums makes its transportation safer.
Application:
Copper coated welding wire is mainly used to weld copper and copper alloys, such as vessels, vehicles, bridges, construction or engineering machinery, pressure vessels, agricultural equipment, pipe of high speed welding, steam and hot water boilers and so on.
A man with gloves is welding a piece of iron plate.
Welding makes two articles become a whole beautifully.A short tube is welded with two bends to make up a tee joint.
The application of copper welding wire makes the seam more beautiful.
Main Characteristics:
Excellent welding technical performance with stable electric arc, good welding seams, less spatters and good anti-pore property.
Higher deposition efficiency.
Fast melting rate.
Details:
0.5-20kg/plastic spool, each plastic spool in a carton, cartons on wooden pallets.
15-20kg/coil, then put coils in drums, 4 drums on a wooden pallet.
0.5-15kg/basket.
Copper coated welding wire chemical composition
C Si Mn S P Cu
0.06 ~ 0.15 0.80 ~ 1.15 1.40 ~ 1.85 ¡¨¹0.025 ¡¨¹0.025 ¡¨¹0.50
Copper coated welding wire mechanical properties
Tensile Strength (MPa) Yield Strength (MPa) Elongation (%)
¡Y500 ¡Y420 ¡Y22
Aluminum welding wire with high stability and toughness
Aluminum welding wire includes more than one type wire, because it has different chemical components. Different alloys make up different aluminum welding wires, like: ER4047, ER1100, ER5183, ER5356, ER4043, ER1070, ER1060, ER2319, ER5556 and so on. The working conditions are different because of different types aluminum welding wire. Therefore, the application of different aluminum welding wire is also different.
Aluminum welding wire winded on three baskets of different sizes.
Baskets of different sizes makes welding wire have various weights.Aluminum welding wire winded on a black plastic spool orderly.
Plastic-spool-packaged aluminum welding wire is cheaper for widely use.Aluminum welding wire wrapped into a circle with three yellow strings fixed placed on the floor.
Coil is the most simple package style that makes the packing of aluminum welding wire more convenient.
Main Characteristics:
Outstanding corrosion resistance.
High toughness.
High stability.
Excellent permeability.
Splendid fluidity.
Easy to operate.
Low welding costs.
Wide applicability.
Application:
Aluminum welding wire can be used in two aspects:
As electrode wire with semi-automatic and automatic gas-shielded welding (MIG-welding);
As filler material in TIG welding not consume electrode (TIG-welding).
The most important application of aluminum welding wire is that it is widely used for brazing of aluminum, Al-Mn, Al-Si-Mg alloy materials.
It is widely used in petrochemical industry, offshore facilities, railway, automotive and so on.
Specific application is shown below: It is used in welding carbon steel and 500MPa grade low alloy. And it is used for welding these articles, like: bicycles, aluminum scooter, engine carriage, pressure vessel, medical equipment, furniture, ships, container, mould, etc.
Details:
Description:
ER4043 is a kind of aluminum & silicon alloy welding wires with 5% silicon, also name S331, and this product is of good liquidity, good forgeability, but lack of ductility. Due to the high silicon content, when used in the welding of high magnesium alloy, easily generated in the weld brittle Mg2Si, reduce the plasticity and the corrosion resistance of joint. In addition, the welding surface color dark, anodized after more different with parent metal color.
Usage:
The argon arc welding of Aluminum alloy casting and workpiece is used as the filler material, special for 6061 and 6XXX series aluminum alloy, and 3XXX & 2XXX series aluminumalloy welding, widely used in ships,engine,chemistry,food,sports,uipment,mould,furniture,vessel,container,etc.
ER4043 aluminum & silicon is with high of crack resistance, but low plasticity, so for Plastic deformation joints after welding, we donor suggest it. You should strictly clean the oxide film on the edge of the workpiece and oil before welding, otherwise it will make bad weld produce and cause porosity, slag inclusion and other defects. Also you can use a plate to hold molten metal to ensure meld form.
S surface treatment: pre hot dipped galvanized (100g/m2)
Electric galvanized (8~12g/m2) + polyester powder (all colors in ral)
Step-1: carton box covered: it can prevent the damage from the bump caused by shipping.
Step-2: plastic film wrapped: it can keep the product from the rain and moisture immersion.
Step-3: steel pallet loading: all the fence export from skyhall are equipped with pallets, loading and unloading by the forklift, avoiding the scratch and deformation by the manual handlings in bulk.
C barb wire thickness : 12 / 12, / 13 / 14 / 14, / 15 / 15, (in b.W.G.)
D type: single strand / double strand
E weight: 25kg/coil
S surface treatment: pre hot dipped galvanized (100g/m2)
Electric galvanized (8~12g/m2) + polyester powder (all colors in ral)
Step-1: carton box covered: it can prevent the damage from the bump caused by shipping.
Step-2: plastic film wrapped: it can keep the product from the rain and moisture immersion.
Step-3: steel pallet loading: all the fence export from skyhall are equipped with pallets, loading and unloading by the forklift, avoiding the scratch and deformation by the manual handlings in bulk.
Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k
Flux type: aluminum-rutile
Basicity index: 0.5-0.8
Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc.
2.Removal of rust, oil, dirt, water, impurities, etc in welding areas.
Packing: 25kg/bag, pallets are available.
Lead time: 2 weeks
Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded.
Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding.
Contact: miss helen duan
Tel/fax: 0086-532-85641729
Lj-sj501 welding flux aws a 5.17 f6a0-el12 soldering flux f7a2-em12k
Flux type: aluminum-rutile
Basicity index: 0.5-0.8
Remark: 1.Before welding, fluxes should be baked for two hours at 300-350ºc.
2.Removal of rust, oil, dirt, water, impurities, etc in welding areas.
Packing: 25kg/bag, pallets are available.
Lead time: 2 weeks
Performance: vrey good weld bead appearance, excellent slag removal with narrow groove and fillet welds. High resistance to cracking and porosity and insensitive to oil, rust, scale and dirt on the surface to be welded.
Applications: used for ordinary carbon steel, low alloy structure and boiler quality steel and high speed welding.
Contact: miss helen duan
Tel/fax: 0086-532-85641729
Stringent Quality Controls measures are adopted to ensure that welding wires are perfectly manufactured as per International Standards. ISO Quality Management system has been implemented as a result of which all products are of World-class Competence. Continuous efforts in the field of research and development are carried out so as to introduce new welding products and offer better services to all our customers.
Special Jumbo Spools and Drums have been developed for specific applications / SPM's. The Steel Bobbins are supplied as per Customer Specification and Schedules. Regular feedback is recorded and necessary corrective actions are taken in case of any complaints/suggestions received. Emphasis on Product & Quality up gradation has been a constant endeavour.
Welding Wires are uniformly and carefully Copper Coated. The coating thickness is maintained at optimum level so that fumes have minimum Copper. This is to protect welder's health and environment. Efforts are now focused to produce Copper Free Welding Wires.
TS2210 series soldering tips for TS2-C210 PDK welding handle, TS2210 solder iron tip fro mobile phone motherboard repair, soldering tips for cell phone circuit board repair.
Features:
Fast heating,long life,anti-oxidation,lead-free environmental protection.
One second heating up,2 seconds of tin.
Heating element material imported from Spain.
Original TS2210 soldering iron tips with many shapes, sizes and special models.They work with TS2-C210 PDK soldering handpieces.
TS2210 long life tips offer instant heat up, excellent heat transfer and great durability.
1 Â Type Specification: Â D*L
2. Application: for making cutting tools, for example end mills, dental burs, reamer etc.
3. Diameter: 0.3-50mm
4. Length: standard 330mm or customized
5. Surface: ground or blank
6. Material: WC+CO
7.Grade: K05-K40
8.Hardness:87.6-94HRA
9.T.R.S:3000-4200
Non-welded connection system
According to DIN2353 and ISO 8434
Nuts and cutting ring
About the nuts, we could offer L series and S series.
About the cutting ring, for non-welded connection, the cutting ring helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus assuring maximum simplicity of complex oleo-dynamic systems. The advantages of the cutting ring:
Axial strengthening, thus high degree of tube connection high degree of tightness
No bulging, thus positive load distribution on the ring
Radial flexibility, thus positive clamping of the tube
About Walform seal, the material is FPM. For non-welded connection, comparing with welding, no preliminary or follow-up work.
Sturdy, metallic seal
Leak-proof
Easy to assemble
Short assembly times, low torque
Low price
Far lower tightening torque compared to all cutting-ring tube fitting system
Cored solder wire is composed of a Solder Wire proportion of two alloys with a reliable Solder joint. Clean and beautiful. After welding insulation, high resistance, low ion contamination, PCB board after welding residue, etc. Suitable for the electronic industry and soldering link. Tin wire is a handy solder for hand soldering circuit boards. Since most tin wires contain flux such as rosin, the use of tin wires can reduce the process and improve the efficiency of welding operations.
Element
Sn96.5Ag3.0Cuo.5
Port
Qingdao, Shanghai, Tianjin, Shenzhen, etc.
Certificate
ISO, etc.
Payment method
T/T,Western Union,L/C,etc.
Diameter
0.5-5.0ï¼?mmï¼?,or as required
Package
Standard export packaging or as required.
Application
It can be used as a coating material and has a wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors.
Metal Inert Gas (MIG) welding is a gas metal arc welding (GMAW) process that uses a continuous solid wire electrode which is heated and fed into the weld pool from a welding gun.
MIG is an attractive alternative to MMA, offering high deposition rates and high productivity
APPLICATION :
When it comes to MIG welding, it uses a combination of heat and an electrode wire to create a molten pool to fuse two pieces of metal together.
In MIG welding, you can easily join a variety of metals, and the type of wire used is determined by the type of metal being welded.
Impact Energy Charpy V notch At 20�°C : 27 Joules Min.
CURRRENT CONDITION: USE DC (+) ONLY
1.
Size of wire (mm) : 0.80
Current Amps (DC) : 50-160
Volts : 20-30
CO2 Gas flow (lt/mm) : 10-15
2 .
Size of wire (mm) : 1.00
Current Amps (DC) : 80-200
Volts : 20-30
CO2 Gas flow (lt/mm) : 12-20
3 .
Size of wire (mm) : 1.20
Current Amps (DC) : 120-280
Volts : 22-40
CO2 Gas flow (lt/mm) : 15-25
Specification :
IS:6419
SIZE RANGE : 0.80 MM, 1.00 MM, 1.20 MM
DESCRIPTION :
Metal Inert Gas (MIG) welding is a gas metal arc welding (GMAW) process that uses a continuous solid wire electrode which is heated and fed into the weld pool from a welding gun.
MIG is an attractive alternative to MMA, offering high deposition rates and high productivity
APPLICATION :
When it comes to MIG welding, it uses a combination of heat and an electrode wire to create a molten pool to fuse two pieces of metal together.
In MIG welding, you can easily join a variety of metals, and the type of wire used is determined by the type of metal being welded.
1901 Welding Wires Supplies Suppliers
Short on time? Let Welding Wires Supplies sellers contact you.
