Material: TP 304/304L, 316/316L, 201, 202, 310S, 321, 800, 600, etc.
Tube delivery condition: bright annealing (BA)
Tube type: weld, TAW
Coil Lengths: max 3000 m per coil tube
Standard: ASTM A269, A249
O.D. from 3 to 25.4mm
W.T. from 0.3 to 2.0mm
Chemical composition:
in accordance with ASTM A269
Mechanical and technical properties:
in accordance to ASTM A269
Soft annealed max. Hardness 150 HV10 Tolerance +10 points
Model type and surface integrity:
in accordance with ASTM A269
Surface roughness Ra < 5 μm
Cleanliness of the tubes:
bore cleanliness in accordance to DIN 8905. The coils shall be dry, clean and free from swarf, drawn and roller marks.
Pressure Test:
100% tested at the appropriate pressure stated under water.
All coils must be flushed and dried after pressure testing to avoid contamination.
Tolerance:
D4/T4, Diameter of ball for ball bearing check
PMI TEST 100% GOOD
ELONGATION IN 50MM LONGITUDINAL
HEAT TREATMENT 1050â?? FOR 5MIN (W.Q.)
MEASUREMENTS & SURFACE: GOOD
IC ASTM A-262 PRACTICE E.NACE MR0175-MR0103
FLARING TESTING AS ASS. TO ASTM A1016
FLATTENING TESTING IS ACC. TO ASTM A1016
100% HYDROSTATIC TEST AS PER A1016/A1016M
MARKING SAMPLE: JW STEEL, TP316/316L, welded, Bright Annealed, ASTM A269, OD3/8'' X WT0.035'' HEAT NO.160326T22
MATERIAL ACC TO ASME SECTION II PART A 2010 EDIT
CERT TO EN 10204 3.1 IN ACCORDANCE WITH PED ANNEX 1.PARAGRAPH 4.3
