Find Verified Welded Wire Mesh Suppliers, Manufacturers and Wholesalers

Stainless steel wedge wire screen welding machine for liquid filtration
The wedge wire screens made by wedge wire screen welding machines are all custom made and can be designed and built to fit screening equipment with specified width and length.
Not only applied in coal mining industry, the wedge wire screen welding machines can also be used in food processing, waste-water filtration, pulp and paper as well as mineral processing applications. With the help of the wedge wire screen welding machines, solid/liquid separation can be easily managed.

Advantages of Continuous Slotted Screens compared to other types of screens:
1. Each intersection of Vee-wire and support bar is welded to produce an extremely strong structure.
2. Continuous slot screens have outwardly enlarging slots which allow only two-point particle contact. Smaller particles pass freely through without plugging.
3. Smooth wire surface and vertical slot orientation allow the catalyst to move vertically against the screen face without being abraded.

Wedge wire screen welding machines can help to manufacture wedge wire screens for the mining and mineral processing industry. Among these screens are sieve bends, flat panels, vibrator screens and centrifuge baskets.
Baskets
The wedge wire screen baskets serve as centrifugal liners which require external supports and also self-supporting balanced baskets for the centrifuge manufacturers. These stainless steel baskets are more complex than the other types of screens requiring extra strength to withstand the stresses of centrifuge dryers. These baskets are typically used in mineral processing for coal, potash, salt, sand, pulp, paper and a variety of chemicals.
Flat panels
Flat, framed and unframed wedge wire panels can be manufactured with a variety of rectangular or round support rods. The wire width and relief angle is determined by weight per square foot and efficiency requirements for your specific application. This screen decking magnifies vibration with drum-tight tension and withstands the violent vibrating action.
Sieve bends
You can use a stainless steel sieve screen in mineral processing plants for coal, potash, taconite, sand or gravel.

Wedge wire screen welding machines can help to manufacture wedge wire screens for the mining and mineral processing industry. Among these screens are sieve bends, flat panels, vibrator screens and centrifuge baskets.
Baskets
The wedge wire screen baskets serve as centrifugal liners which require external supports and also self-supporting balanced baskets for the centrifuge manufacturers. These stainless steel baskets are more complex than the other types of screens requiring extra strength to withstand the stresses of centrifuge dryers. These baskets are typically used in mineral processing for coal, potash, salt, sand, pulp, paper and a variety of chemicals.
Flat panels
Flat, framed and unframed wedge wire panels can be manufactured with a variety of rectangular or round support rods. The wire width and relief angle is determined by weight per square foot and efficiency requirements for your specific application. This screen decking magnifies vibration with drum-tight tension and withstands the violent vibrating action.
Sieve bends
You can use a stainless steel sieve screen in mineral processing plants for coal, potash, taconite, sand or gravel.

Main advantages of our wedge wire screen welding machines include:
1. Low investment cost
As a factory in china, we, re specialized in making wedge wire screen welding machines. The factory price we provide is comparable low and after sale service is good.
2. Low maintenance
The wedge wire screen welding machines we produced can be used for decades of years. And the wedge wire screens produced by the machines are robust and have no moving parts. Their design prevents clogging, and the materials used resist corrosion and biofouling.
3. Easy cleaning
The special structure of the wedge wire screens are non clogging and easy to clean.
4. No waste management
During backwash operations, waste is carried away by the current.
5. Protection of the environment
The flow rate through the wedge wire screen is so low that neither flora nor fauna can be dragged into the system.

Characteristics of Wedge Wire Screen Welding Machine:
We offer a combination of economy, innovation and flexibility by providing our wedge wire screen welding machines.
Our engineering staff is fully capable of precision design to ensure that each requirement is met. Now with our technical development, the wedge wire screen products produced by our wedge wire screen welding machines can meet most clients need.
The wedge wire screens are charactered with:
Longer Lasting
The wedge wire screens utilize the Vee-Wire technology. They are extremely durable and have high resistance to abrasion, corrosion and impact damage.
Lower Maintenance
The rugged construction and high quality of materials make possible a product that lasts longer and requires less maintenance.
Less Costly
Superior operating efficiency, extended service life and reduced maintenance needs combine to reduce the true cost of wedge wire screens to plant operators.

Wedge Wire Screen Welding Machine in Different Industry Fields
Wedge wire screen weldng machines can make wedge wire screen products in different shapes and usages. Till now the wedge wire screens are widely used in different industry fields.
Architects specify wedge wire screens for column and wall covers, floor grating, light fixtures,sun screens and various decorative applications.
Corn Wet Milling uses a variety of wedge wire screens ranging from looped wire to fine wire mesh.
Food Processors favor wedge wire screens because theyâ??re heat and corrosion resistant.
Malting Plant Operators find the flat panel wedge wire screens provide a more thorough mixing during the turning phase, and better ventilation in the kilning phase.
Pulp and Paper Plants use wedge wire screens in the wood yard, paper machines, recycling, dewatering, debris removal, fiber fractionalization, drying, water purification and other processes.
Sugar Processors use wedge wire screen baskets and other washing, dewatering and solids retention screens.
Mineral Processorsrely on wedge wire centrifuge baskets, sieve bends and flat panels for multiple operations.
Refiners use wedge wire pipes and baskets or scallops for catalytic reforming, isomerization, ammonia conversion and other processes.
Water and Waste Water Treatment benefit from high flow capacity, dependable media retention and excellent corrosion resistance.
Water Supply Systems use wedge wire surface water intakes and custom-engineered water well screens and system maintenance chemicals.

Compared with other types of screens, our wedge wire screens are charactered with:
1. The wedge tapered opening becomes progressively wider increasing dewatering
2. Non plugging, unlike mesh there are only two contact points to retain particles
3. Slot sizes ranging from 0.2 to 16mm
4. Durable and capable of carrying heavier loads without support structures
5. One piece construction
6. Flexibility in forming fabricating and shaping
7. Wide range of materials
8. Low maintenance easy to clean
9. Tolerance ranging within 0.03mm

CN-5000TA-DH is the typical High Frequency PVC Welding Machine which is designed and made for making electric blanket,pvc label, and many application related to PVC fabric or PVC &PU coated fabric.

1, Firmly welding ,meet the needs of different thickness of materials,precision positioning by laser light.
2, Enjoy big free space behind electrode;featured with a deep and wide material-feeding area.it is good for welding continuously.
3, Adopting high sensitive 5557 anti-flash device to avoid damaging the machine and tool.
4, European standard high frequency oscillatory square cabinet,more reliable and stable in output.
5, Ground-press platen is behind welding tooling good for operation and to protect the workers from hurt hands .
6, With hanging head for welding without barrier of the machine it is convenient for operation
7, The work table is 3 meters for each section. It could be added much longer.

MODEL:CN-5000A-DH CN-8000A-DH CN-10KWA-DH
POWER: 5KW 8KW 10KW
POWER SUPPLY: 8KVA 15KVA 18KVA
VIBRATIONAL TUBE: 7T85RB 7T69RB E3069
MAXPRESSURE: 350KG 500KG 500KG
SIZE OF UP
ELECTRODE: 120*290MM 120*290MM 120*290MM
WORKING TABLE: 350*700MM 350*700MM 350*700MM
RECTIFIER: SILICON DIODE SILICON DIODE SILICON DIODE
MAX GAP OF
ELECTRODES: 200MM 200MM 200MM
SIZE OF ACTIVE
HORN: 150MM 150MM 150MM
POWER SUPPLY: AC380V 3P 50/60HZ AC380V 3P 50/60HZ AC380V 3P 50/60HZ
FREQUENCY: 27.12MHZ 27.12MHZ 27.12MHZ
DRIVEN MODE: PNEUMATIC PNEUMATIC PNEUMATIC
WELDING TIME: 0-10S 0-10S 0-10S
NET WEIGHT: 500KG 500KG 650KG
OVERALL
DIMENSION: 800*500*1800MM 800*500*1800MM 900*600*1800MM

Feature :

1. Special for PVC Inflatable welding
2. Press board installed
3. 3 pedals to operate .It is remote control the operation
4. Can be design as requirement


Technical Data :
MODEL: CN-75KWTMAXPRESSURE: 2000KG
POWER: 75KW MAX GAP OF ELECTRODES: 150MM
POWER SUPPLY: 220/380V*3P 50/60HZ SIZE OF ACTIVE HORN: 150MM
FREQUENCY: 27.12MHz SIZE OF UP ELECTRODE: 2100*2600MM
ELETRONIC POWER: 100KVA SIZE OF WORKING TABLE: 2200*2800MM
RECTIFIER: SILICON DIODE NET WEIGHT: 10T
VIBRATIONAL TUBE: 9T94A WELD TIME: 0-10s Adjustable
DRIVEN MODE: Pneumatic FORESEEN PRODUCTIVITY: 2000PCS/8Hour



Introduction :

1. Welding for different thickness PVC film material.

2. Welding and connecting for material with big length.

3. 5557 sparking device can protect mold.

4. Different machine with different output power can weld in different length.


Advantage :

1. Normally, the hf power range from 5kw-180kw

So different requirements decide the different output power.

2. There is big space designed specially for putting material conveniently

3. Special grounding device makes the machine more stable.

4. It adopts coaxial output tuner which makes the output powerful. Meanwhile,

5. It adopts 5557 sparking device to protect mold well.

6. The welding time can be adjusted according to different material and thickness


Application :

CN-75KWT Inflatable Welding Machine is special for inflatable hot tub, inflatable snow tubes ,inflatable tube slides welding. It is widely used for welding inflatable floating island, inflatable jump bed ,inflatable castle, inflatable slides, inflatable water slides, inflatable water park, inflatable pool slides ,inflatable bouncy castle, inflatable water trampoline , inflatable water roller , welding and jointing.


Pre-sales service

1. Help you find the suitable machine for your product.
2. You are always welcome to visit our factory.
3. 30%deposit
4. Machine manufacture and quality control during whole process.
5. Show you the finished product.

After-sales service

1. Get your confirmation before delivery.
2. Balance payment against T/T or B/L.
3. Timely solve your working problems.
4. If necessary, we will send technician to guide you for machine usage.
5. Two year quality guarantee for the machine

Vibration welding machine, a high amplitude welding machine equipped with high efficiency single phase output. Applied for thermoplastic,.irregular resin such as ABS,PC,PVC,PMMA,PES; Semi-crystalline resin such as HDPE,PA,PP,TPO; Automotive parts such as inlet manifold,panel board,tail light,bumper; interior light,storage bin,washer pump,sprayer, cleaner housing welding.

CN-565/ CN-568 series vibration welding machine, a high amplitude welding machine equipped with high efficiency single phase output amplifier makes them suitable for welding automobile IP and larger plastic products .
Linear sensors for precise lift table position monitoring and melting control during welding process, 4 seconds of significantly short auto tuning time, user friendly touch panel and communication, real-time resonance frequency tracing, auto fixture recognition sensor and specialized software has been applied.
Slide cam can be adapted as an option for more complicated products.
With superior welding strength and quality, they are suitable in large automobile parts industries.

Advantage

1. High intensity precision welding
2. IGBT technology for powerful Amp output
3. ASIC circuit application
4. Communication with external source
5. Auto amplitude maintenance function
6. Output limit control
7. 2 welding mode : Depth & Time
8. Resonance frequency auto tuning
9. Welding result analysis (good/bad weld)
10. Multi-stage welding
11. Easy to move by installed solid controlling wheel
12. Superb safety features (alarm function)
13. Weld parameter storage function
14. Easy fixture replacement
15. Sound proof device
16. Communication function
17. Welding result printing function

Technical Data
MODEL: CN-565
CONTROLLER:SOLID STATE CONTROLLER
POWER OF VIBRATION: 8KW
SIZE OF LIFTING TABLE: 710*560MM
POWER SUPPLY: 220/380V*3P 50/60HZ
SIZE OF DRIVING TABLE: 200MM
FREQUENCYOF VIBRATION: 210-250Hz
TRAVEL OF TABLE: 340MM
INFRARED HEATING POWER: 7KW
VALUE OF NOISE: 80dB
MAX CLUMP FORCE: 3.6KN
NET WEIGHT: 650KG
AMPLITUDE RANGE: 0.2-1.8MM
SIZE OF FRONT DOOR: 820*300MM

High frequency treadmill welding machine, conveyor belt welding machine is main for to do kinds of pvc /tpu conveyor belt, pvc sidewall, pvc profile, pvc cleat, pvc steps, pvc treadmill, pvc guides, t-cleat, pvc treadmill belt etc .With accurate positioning and smooth welding .

1. Two-way automatic sliding table installed , mould can be positioned accurately
2. Steady cutting pressure 1-50t can be adjustable
3. Double limit current ampere meter installed to ensure radio frequency output stable and reliable
4. Japanese omron digital temperature controller
5. High sensitive anti-spark device nl5557 to protect the mold , material and product.
6. Over-current, over-voltage protection device installed can cut off the power supply automatically when abnormal to protect the oscillator tube and rectifier.
7. Radio frequency output can be adjustable based on electro size and material thickness to guarantee the welding quality and reduce welding time to improve the machine production speed
8. Industrial wave band 27.12/40.68 mhzs according to the provision of nations" radio interference committee"(cispr), frequency stabilizer & frequency magnetic leakage suppressor installed to reduce the interference toward the equipment outside

Model: Cn-15kw-2e Cn-25kw-2e Cn-35kw-2e
Power: 15kw 25kw 35kw
Power supply: 25kva 35kva 50kva
Vibrational tube: 8t85rb 8t25ra 8t87rb
Maxpressure: 1000kg 1500kg 1500kg
Size of up electrode: 150*600mm 150*700mm 150*800mm
Size of working table: 250*750mm 250*850mm 250*950mm
Rectifier: Silicon diode Silicon diode Silicon diode
Max gap of electrodes: 150mm 150mm 150mm
Size of active horn: 150mm 150mm 150mm
Power supply: Ac380v 3p 50/60hz ac380v 3p 50/60hz ac380v 3p 50/60hz
Frequency: 27.12mhz 27.12mhz 27.12mhz
Space behind electrode: 1150mm 1150mm 1150mm
Driven mode: Pneumatic pneumatic Pneumatic
Welding time: 0-10s 0-10s 0-10s
Net weight: 1500kg 1800kg 2000kg
Overall dimension: 1700*1500*1800mm 1950*1500*2400mm 2000*1500*2500mm

The automatic walking style high frequency PVC welding machine is designed to weld plastic materials.

The automatic welding machine can weld Trampoline, Jumping bed,bungee trampoline, spring bed, Advertising cloth,Tensile membrane structure,Tarpaulin,Canvas,Tents, PVC Fabric coated,Awning with eyelet and rope inside of pvc welding and jointing.

High Frequency PVC Welding is to apply high-frequency electromagnetic fields in the form of energy to applications and as the same time, provide pressure to bond materials surface to weld them. Each machine requires a high frequency generator to provide a high frequency current, so-called Oscillation bucket. The tool used to transfer high frequency to the material is called electrodes, that is high frequency mold.


High frequency welding is using a high-frequency current to generate heat, liquidate (melt) the plastic material together with the pressure to weld the materials completely without external heating. In the average pressure after a period of time to cool so that the products finished, high frequency welding process is complete. The strength of the material is stronger than the original after high frequency welding.


MODEL: CN-5KW-R CN-8KW-R
HF POWER: 5KW 8KW
INPUT POWER: 8KVA 15KVA
ELECTRON TUBE:7T85RB 7T69RB
MAX PRESSUR: 300KG 500KG
SPEED: 2-4m/min 2-4m/min
WELD WIDTH: 10-40MM 10-40MM
WIDTH OF MATERIAL : 0.5-2.5MM 0.5-2.5MM
RECRIFIER: SILICON DIODE SILICON DIODE
GAP OF ELECTRODE: 100MM 100MM
STROKE: 150MM 150MM
POWER SUPPLY: AC380V 3P 50/60HZ AC380V 3P 50/60HZ
FREQUENCY: 27.12MHZ 27.12MHZ
DRIVE MODE: Pneumatic Pneumatic
WELD TIME: 0-10s 0-10s

CN-15KW-JD mat welding machine is special for car heel pad,carpet, car mats ,Car floor mats, PVC car mat,PVC carpet, PVC floor mats etc.

1. Apply for welding the heel-mat on the carpet
2. Suitable for LHD & RHD car.
3. Customized service offered.
4. Hydraulic Pressure from 2 ton -5 ton.
5. PLC programmed

1. Welding for different thickness PVC film material.
2. Welding and connecting for material with big length.
3. 5557 sparking device can protect mold.
4. Different machine with different output power can weld in different length.

Advantage

1. Normally, for car heel pad,carpet, car mats ,Car floor mats, PVC car mat,PVC carpet weld is that take the HF power from 10-35KW. So different requirements decide the different output power.
2. There is cavity designed specially for putting material conveniently
3. Special grounding device makes the machine more stable.
4. It adopts coaxial output tuner which makes the output powerful. Meanwhile, it adopts 5557 sparking device to protect mold well. The welding time can be adjusted according to different material and thickness

MODEL: CN-15KW-JD CN-25KW-JDCN-35KW-JD
POWER: 15KW 25KW 35KW
INPUT POWER : 25KVA 35KVA 50KVA
ELECTRON TUBE: 8T85RB 8T25RA 8T87RB
MAXPRESSURE: 2000KG 1500KG 1500KG
SIZE OF UP ELECTRODE:550*400MM 600*450MM650*500MM
SIZE OF WORKING TABLE:600*500MM 650*550MM700*600MM
RECTIFIER: SILICON DIODE SILICON DIODESILICON DIODE
MAX GAP OF ELECTRODES: 150MM 150MM 150MM
SIZE OF ACTIVE HORN:150MM 150MM 150MM
POWER SUPPLY: AC380V 3P 50/60HZ AC380V 3P 50/60HZAC380V 3P 50/60HZ
FREQUENCY: 27.12MHZ 27.12MHZ 27.12MHZ
DRIVEN MODE: HYDRAULIC HYDRAULIC HYDRAULIC

This machine widely use for various round tube packing , such as gift , food, toy, chocolate, electronic products packing etc.

The specialty of this machine is a full-automatic equipment:automatic feeding-preforming-fixed position -spraying glue-dry -forming -cutting. All the process are controlled by plc computer, which save manpower and decrease production cost. Besides, we can install ultrasonic function to seal cylinder if you need. That is two-in-one machine, and it is convenient for you to choose ultrasonic welding or glue.

This machine can adjust the tube dimension, such as tube diameter, length and so on.

1. Cn-2030 fully automatic cylinder curling machine can process cylinder edge curling with different length, diameter and thickness
2. Full automatic, and wonderful performance
3. Suitable for materials like pvc, apet, petg .Etc.
4. Special adjustment is available upon customer's requirement

1> plc operation system adopted, fast and precise cylinder forming performance;
2> automatic material feeding and rolling, enables high efficiency;
3> diameter and length of cylinders are adjustable;
4> both gluing and ultrasonic bonding devices are installed and optional;
5> photoelectric tracking cutting and forming, so precision forming and non-scratch effect are available,
6> synchronous punching device for making punch holes on both sides of cylinder are installed.
7> co-operated with hy-200h, we can realize the automatic production line purpose.

Product details

Model:cn-200tf
Forming speed of ultrasonic: 50pcs/min as per 100mm/pc
Height of forming:10-4000mm
Forming speed of gluing: 60pcs/min as per100mm/pc
Thickness of material: 0.15-1.0mm
Forming dia :60-200mm by ultrasonic, 30-200mm by glue
Control system: plc touch screen
Overall dimension:4200*800*1700mm(l*w*h)
Driven mode:servo motor
Net weight:800kg

For welding Tensile membrane structure, tarpaulin and canvas, PVC Coated Fabrics.
Itâ??s suitable for oil containment boom/fence, oil/water/gas tank, stretched ceilings, inflatable pool/boat, drift boat, tents, tarpualin, canvas, truck covers,geomembrane, advertising banners, film screen, above ground pool, liner, curtain etc.

1. Anti-spark device NL5557 cuts high frequency power immediately when spark occurs to protect mould and material.
2. Machine equipped with frequency stabilizer and high frequency magnetic leakage suppressor that provides leakage of electron magnetic radiation to avoid jamming other electrical instruments such as television and radios etc.
3. When the current exceeds its limit, the overload relay functions automatically to protect oscillation tubes and rectifier. Frequency deviation caused by misoperation is also prevented.
4. Machine has selectable output power ensured a stable quality of the products for it could reduce the heating time when joining is being carried out.
5. Length, width and welding area can be adjusted by change welding die.
6. European-model square high frequency vibration box, more reliable and stable in output
7. Single line or two lines continue welding, welding length can be ordered as special need.
8. Can be used as a freestanding machine for welding production or as a supplement to a larger system.
9. CE rated machine; Taiwan Airtac Pneumatic parts, Japan Omron and Toshiba brand components.
10. With Separated generator cabinet.
11. Four Column steel structure with separated HF generator
12. With tooling positioning fixture .
13. Auto mode for welding.
14. Adjustable welding pressure 1-10 tons.

MODEL:CN-5KW-F1CN-8KW-F1CN-10KW-F1CN-12KW-F1CN-15KW-F1CN-25KW-F1
POWER: 5KW 8KW 10KW 12KW 15KW 25KW
POWER
SUPPLY: 8KVA 15KVA 18KVA 20KVA 25KVA 35KVA
TUBE: 7T85RB 7T69RB E3069 E3130 8T85RB 8T25RA
MAXPRESSURE: 500KG 500KG 500KG 800KG 1000KG 1500KG
SIZE OF UP
ELECTRODE:50*50*600MM 50*50*800MM
50*50*800MM
50*50*900MM
50*50*900MM 50*50*1000MM
WORKING
TABLE: 350*700MM 450*1050MM
450*1050MM 450*1150MM
450*1150MM 450*1250MM
RECTIFIER:SILICON DIODE
MAX GAP OF ELECTRODES: 150MM
SIZE OF ACTIVE HORN:150MM
POWER SUPPLY:AC380V 3P 50/60HZ
FREQUENCY:27.12MHZ
DRIVEN MODE:PNEUMATIC
WELDING TIME:0-10S

For welding Tensile membrane structure, tarpaulin and canvas, PVC Coated Fabrics.
Itâ??s suitable for oil containment boom/fence, oil/water/gas tank, stretched ceilings, inflatable pool/boat, drift boat, tents, tarpualin, canvas, truck covers,geomembrane, advertising banners, film screen, above ground pool, liner, curtain etc.

1. Anti-spark device NL5557 cuts high frequency power immediately when spark occurs to protect mould and material.
2. Machine equipped with frequency stabilizer and high frequency magnetic leakage suppressor that provides leakage of electron magnetic radiation to avoid jamming other electrical instruments such as television and radios etc.
3. When the current exceeds its limit, the overload relay functions automatically to protect oscillation tubes and rectifier. Frequency deviation caused by misoperation is also prevented.
4. Machine has selectable output power ensured a stable quality of the products for it could reduce the heating time when joining is being carried out.
5. Length, width and welding area can be adjusted by change welding die.
6. European-model square high frequency vibration box, more reliable and stable in output
7. Single line or two lines continue welding, welding length can be ordered as special need.
8. Can be used as a freestanding machine for welding production or as a supplement to a larger system.
9. CE rated machine; Taiwan Airtac Pneumatic parts, Japan Omron and Toshiba brand components.
10. With Separated generator cabinet.
11. Four Column steel structure with separated HF generator
12. With tooling positioning fixture .
13. Auto mode for welding.
14. Adjustable welding pressure 1-10 tons.

MODEL:CN-5KW-F1CN-8KW-F1CN-10KW-F1CN-12KW-F1CN-15KW-F1CN-25KW-F1
POWER: 5KW 8KW 10KW 12KW 15KW 25KW
POWER
SUPPLY: 8KVA 15KVA 18KVA 20KVA 25KVA 35KVA
TUBE: 7T85RB 7T69RB E3069 E3130 8T85RB 8T25RA
MAXPRESSURE: 500KG 500KG 500KG 800KG 1000KG 1500KG
SIZE OF UP
ELECTRODE:50*50*600MM 50*50*800MM
50*50*800MM
50*50*900MM
50*50*900MM 50*50*1000MM
WORKING
TABLE: 350*700MM 450*1050MM
450*1050MM 450*1150MM
450*1150MM 450*1250MM
RECTIFIER:SILICON DIODE
MAX GAP OF ELECTRODES: 150MM
SIZE OF ACTIVE HORN:150MM
POWER SUPPLY:AC380V 3P 50/60HZ
FREQUENCY:27.12MHZ
DRIVEN MODE:PNEUMATIC
WELDING TIME:0-10S

Applied for medical bag and blood PVC bag, urine bag, infusion bag etc welding and jointing.
1. Simple to setup and easy to operate.
2. Firmly welding ,meet the needs of different thickness of materials.
3. With current limit system, when the high frequency current reaching a high value automatically cut off and protection products to avoid excessive current lead scrap
4. Automated weld cycle with multiple recipes
5. Fully H.F Shielded and filtered work area.
6. European standard high frequency oscillatory square cabinet,more reliable and stable in output.
7. Ultra fast sensitive anti spark system.
8. With Auto slide table.

Technical Data

MODEL:CN-10GL-Q2
MAXPRESSURE:600KG
POWER:10KW
MAX GAP OF ELECTRODES:150MM
POWER SUPPLY:220/380V*3P 50/60HZ
SIZE OF ACTIVE HORN:150MM
FREQUENCY:27.12MHz
SIZE OF UP ELECTRODE:400*550MM
ELETRONIC POWER:15KVA
SIZE OF WORKING TABLE:600*800MM
RECTIFIER:SILICON DIODE
NET WEIGHT:850KG
VIBRATIONAL TUBE:E3069
WELD TIME:0-10s Adjustable
DRIVEN MODE:Pneumatic


FORESEEN PRODUCTIVITY:5PCS/MIN

Auto movable air supported membrane structure welding machine has output power of 15-25kW, pneumatic press, automatic PLC control. The machine is movable type of machine with servo control system that is designed (height and width) according to conditions and requirements of each manufacturer factory.
It is equipped with a laser light positioning function. The dimensions of the work table are custom made in accordance with the welding electrode length. The movable machines easy access to the work table and the welding head and are used in the production process of high speed doors, tents, tensile and membrane structures, advertising billboards, oil-booms, water cisterns, pool liners, portable satellite dishes, etc.

â? . PRODUCT FEATURES :
1, Firmly welding ,meet the needs of different thickness of materials,precision positioning by laser light.
2, It is big space under electrode;it is good for welding any direction continuously.
3, Adopting high sensitive 5557 anti-flash device to avoid damaging the machine and tool.
4, European standard high frequency oscillatory square cabinet,more reliable and stable in output.
5, Servomotors based welding head drive machine moving.
6, HIWIN linear guides for effective and precise movement
7, Ability to set weld head track movement along any X axis parameters.
8, Unlimit extendable of work table.
9, Movement controlled by servomotor, precision of positioning +/- 0,5 mm.
10, X axis position on work table controlled by servo.
11, With HF AutoTunning System - automatic control of output HF power .
12, Tooling bar press protection system for operator safety and ease of operating and positioning of welded material.
13, Operator chooses the HF weld cycle with preprogrammed options (power output, time of weld, pressure and distance)

â?¡. APPLICATION RANGE :
Applied for swimming ring ,air floating, inflatable water trampoline ,inflatable water roller ,inflatable castle, inflatable slides, inflatable water slides, inflatable water park, inflatable pool slides ,inflatable bouncy castle, inflatable jump bed welding and jointing.

â?¢. TECHNICAL SPECIFICATION :

MODEL:CN-25KWA
POWER:25KW
POWER SUPPLY:35KVA
VIBRATIONAL TUBE:8T25RA
MAXPRESSURE:3500KG
SIZE OF UP ELECTRODE:50*50*1000MM
WORKING TABLE SIZE:800*15000MM Standard
SPACE UNDER ELECTRODE:660MM
ELECTRODE LENGTH:UP TO 1500MM
RECTIFIER:SILICON DIODE
MAX GAP OF ELECTRODES:150MM
WELDING ELECTRODE STROKE:10-150MM ADJUTABLE
SIZE OF TROUGH :400*200MM (Width * Height)
COOLING SYSTEM:FAN COOLING
POWER SUPPLY:AC380V 3P 50/60HZ
FREQUENCY:27.12MHZ
DRIVEN MODE:PNEUMATIC
WELDING TIME:0-10S

Ultrasonic Welding designed for ABS/PE/PC/PS/PVC/PP
Good Quality generator and transducers installed (South Korea/European/U.S.A Brand optional on request)

ADJUSTABLE PLC man-machine interface control system
Adjustable robot manipulator can remove the product automatically, wheels installed are convenient to move the machine around.
High value oscillator installed, high quality, reliable working status;
Use different moulds, you can realize different welding application
Multi-position design, 3-24 working positions adjustable.

Technical Data

MODEL:CN-2615FREQUENCY:15KHz
POWER OUTPUT:2600WDRIVEN MODE:PNEUMATIC
POWER SUPPLY:220/380V*3P 50/60HZSTROKE:70MM
AIR PRESSURE:0.6MPaVIBRATION SYSTEM:Auto Stimulating
OUTPUT TIME:0.1-99SAIR COMPRESSOR:1HP
WELDING AREA:200MAX INPUT POWER:1.2KW
OVERALL DIMENSION:300*200*850MMNET WEIGHT:200KG

Ultrasonic Welding designed for ABS/PE/PC/PS/PVC/PP
Good Quality generator and transducers installed (South Korea/European/U.S.A Brand optional on request)

ADJUSTABLE PLC man-machine interface control system
Adjustable robot manipulator can remove the product automatically, wheels installed are convenient to move the machine around.
High value oscillator installed, high quality, reliable working status;
Use different moulds, you can realize different welding application
Multi-position design, 3-24 working positions adjustable.

Technical Data

MODEL:CN-2615FREQUENCY:15KHz
POWER OUTPUT:2600WDRIVEN MODE:PNEUMATIC
POWER SUPPLY:220/380V*3P 50/60HZSTROKE:70MM
AIR PRESSURE:0.6MPaVIBRATION SYSTEM:Auto Stimulating
OUTPUT TIME:0.1-99SAIR COMPRESSOR:1HP
WELDING AREA:200MAX INPUT POWER:1.2KW
OVERALL DIMENSION:300*200*850MMNET WEIGHT:200KG

Ultrasonic Welding designed for ABS/PE/PC/PS/PVC/PP
Good Quality generator and transducers installed (South Korea/European/U.S.A Brand optional on request)

ADJUSTABLE PLC man-machine interface control system
Adjustable robot manipulator can remove the product automatically, wheels installed are convenient to move the machine around.
High value oscillator installed, high quality, reliable working status;
Use different moulds, you can realize different welding application
Multi-position design, 3-24 working positions adjustable.

Technical Data

MODEL:CN-2615FREQUENCY:15KHz
POWER OUTPUT:2600WDRIVEN MODE:PNEUMATIC
POWER SUPPLY:220/380V*3P 50/60HZSTROKE:70MM
AIR PRESSURE:0.6MPaVIBRATION SYSTEM:Auto Stimulating
OUTPUT TIME:0.1-99SAIR COMPRESSOR:1HP
WELDING AREA:ï¿ 200MAX INPUT POWER:1.2KW
OVERALL DIMENSION:300*200*850MMNET WEIGHT:200KG

For welding PVC shower curtain and window curtain, making or seaming the products made of PVC, EVA, PEVA shower curtain ,Window Curtain etc.

1, Anti-spark device protects electric system to cut high frequency power immediately when spark occurs to protect mould and material.
2, Jamming prevention device. Shower Curtain Welding Machine equipped with frequency stabilizer and high frequency magnetic leakage suppressor, this device provide leakage of electron magnetic radiation to avoid jamming other electrical instruments such as television and radios etc.
3, Safety device. When the current exceeds its limit, the overload relay functions automatically to protect oscillation tubes and rectifier. Frequency deviation caused by misoperation is also prevented.
4, Easy tuning and special protection circuit. Shower Curtain Welding Machine has selectable output power ensured a stable quality of the products for it could reduce the heating time when joining is being carried out.
5, Easily adjustable tuner. Output power can be adjusted at the tuner according to electrode size and material thickness. In addition, other control devices and special electrical circuits have cut down required welding time considerably to raise the machine productivity.
6, Adjustment for the distance on the machine head. Adjust the distance on the Shower Curtain Welding Machine head if practical as the mould's size and height are different. Save working load while processing accuracy can reach to 98%.

MODEL: CN-25KW-SC CN-35KW-SC
POWER: 25KW 35KW
POWER SUPPLY: 220/380V*3P 50/60HZ220/380V*3P 50/60HZ
FREQUENCY: 27.12MHz 27.12MHz
ELETRONIC POWER: 35KVA 50KVA
RECTIFIER: SILICON DIODE SILICON DIODE
VIBRATIONAL TUBE: 8T25RA 8T87RB
ARC SUPPRESS: NL5557 NL5557
MAXPRESSURE: 4000KG 4000KG
MAX GAP OF ELECTRODES: 160MM 160MM
STROKE: 200MM 200MM
SIZE OF UP ELECTRODE:250*1900MM 250*2000MM
SIZE OF WORKING TABLE:300*1900MM 300*2000MM
NET WEIGHT: 2.5T 3T
WELD TIME: 0-10s Adjustable 0-10s Adjustable
DRIVEN MODE: PNEUMATIC PNEUMATIC
FORESEEN PRODUCTIVITY: 20 TIMES/MINUTE 1200 PCS/HOUR