Human composition inspector for fitness makes use of bioelectrical impedance analysis that apply to families and individuals. Bioelectrical impedance analysis is bia for short.It not only can measure body weight, but also body water, body fat, visceral fat and bone mineral content and so on.This technology has been widely used in the clinical medicine field. It¡¯s favored by household, top grade hotel , health management center, beauty shop and fitness center because of its non-invasive, accuracy and safety.
Human composition inspector for fitness makes use of bioelectrical impedance analysis that apply to families and individuals. Bioelectrical impedance analysis is bia for short.It not only can measure body weight, but also body water, body fat, visceral fat and bone mineral content and so on.This technology has been widely used in the clinical medicine field. It¡¯s favored by household, top grade hotel , health management center, beauty shop and fitness center because of its non-invasive, accuracy and safety.
Introduction:
FB Continuous Loss-in-Weight Feeder, short for Loss in weight Feeder, is a continuous feeding device to measure the material flow by the decrease rate of material in unit time. As measuring flow rate in an approximately static weighing method, it is simple, high precision and practical. It is widely used in power, pharmaceutical, food, chemicals and building materials industries as the measurement equipment for powder material, granule material and bulk material, giving precise measurement and continuous feeding control to the various components of the material.
The control system adopts PLC + HMI or intelligent instrument which is very easy to operate and is stable and reliable. It can
display state of the feeder and also have friendly human-computer interaction interface.
Features:
1.With simple and reliable structure design which prevent material impact during feeding efficiently and ensure excellent material flow inside the storage bin and short re-feeding time and also ensure transmission system operate well and in good linear;
2.Suitable material: non-cohesive powder and solid granule
3.Accurate continuous feeding
4.Full discharge without residue, easy and simple to clean
5.easy to stall and operate
6.High feeding precision
7.Widely measuring control range
8.The Control system can be PLC control or dynamic control instrument, which can set flow rate and operation mode, indicate total accumulation, instantaneous flow rate and output as well as other parameters for complete feeding and discharge control and also can indicate working state and alarm;
9.The control system is in modular design and can be connected to upper computer, PLC or DCS through the instrument and
communication interface. It is very stable and reliable
Structure:
1.The loss-in-weight feeder is composed of assist flow storehouse, manual valve, two pneumatic valve, surge bin, flexible
connection, weighing bin, load cell, mixing device and screw conveyor.
2.Assist flow storehouse: adopting automatic air blow, which made material form rotational flow, preventing phenomenon of blockage and flow material;
3.Surge bin: two imported phenomenon valve act as upper and lower joint parts, which can ensure the material absolutely sealing,in this case, the material will never flow to weighing bin, thus keep a high accuracy;
4.Weighing bin: the weighing bin is designed for weighing and able to prevent bridge and material impact and also ensure smooth and well-distributed feeding; meanwhile, it is easy to dismantle during cleaning and replacing of some parts and components. The volume of the material bin depends on the feeding capacity.
5.Load cell: three highly pr¨¦cised sensors are mounted on the weighing bin and distributed at 120¡ãC ensuring the weighing
accuracy.
6.Mixing device: to prevent bridging and ensure smooth and well-distributed feeding, its main structure is that add mixing
activation device on top of the weighing bin with horizontal motor and reducer inside to drive vanes for mixing.
7.Screw Conveyor: high accuracy screw is used, allowing a small spacing between the screw and shell after precision processing, thus ensuring high weighing and measuring precision and stable feeding. The motor and reducer is connected directly to shaft of the screw blade which reduce the transitional steps so as to ensure high weighing accuracy.
8.All parts that contacting material are made of stainless steel, which can improve the fluidity of material and also can improve service life.
Parameters:
Ambient temperature: -20C~100C
Working voltage: AC380V 50Hz
Measuring Accuracy: 0.5%
Material moisture: 2%
Feeding speed: 0.03t/h~300t/h
Communication interface: RS485, Mod-bus
Hardened stainless steel frame and measuring jaws
Thumb roll & knurled locking screw for more convenient measurement and reading
Relative/absolute measurement interchange at any position(abs function)
Glass fixed grid, stable and high accuracy
Quick display of the measured value on lcd screen
With on-off power switch & auto power-off for option
Waterproof ip54
Four function key
With depth bridge
Zero-setting at any position
Mm/inch measurement system conversion
3v environmental battery, battery life >1 year
Measurement both for id, od, depth, and steps
Part no.Measuring range(mm/inch) Resolution(mm/inch)Accuracy
(mm/inch).
Plastic box with froam inside, then carton box, then master carton
1489 Weighing Scales Measures Suppliers
Short on time? Let Weighing Scales Measures sellers contact you.
This auto stainer provides fast, easy and stable staining process for staining sputum specimen (for detecting afb, tubercle bacillus) according to ziehl-neelsen staining method by automated system control and slide heating system. This new innovated stainer features advanced functions and performances over manual staining or automated dip-type stainers, include simplicity and convenience. It can be provide safety and comfortable environment of test lab.
Dimension: 480 x 445 x 265 mm
Clearance height(lid open): max. 565 mm(open door)
Weight: approx. 21 kgs
This auto stainer provides fast, easy and stable staining process for staining sputum specimen (for detecting tubercle bacillus) according to fluorochrome staining method by automated system control. This new innovated stainer features advanced functions and performances over manual staining or automated dip-type stainers, include simplicity and convenience. It can be provide safety and comfortable environment of test lab.
Dimensions: 480 x 445 x 265 mm
Clearance height(lid open): max. 565 mm(door open)
Weight: approx. 21 kgs
For weighing hanging loads.
This type is specially designed for metallurgy and foundry industry. It is accurate, and has manyspecifications. It is multi-functional, easy to use, and has excellent anti-heat and anti-magnetic performance. It is widely used in steel making, founding, ladle plant and other placewith high temperature and strong magnetic environment. It is specially designed and improved fromcommon scales.
Simple and effective crane scale. No frills weighing allows for a low price but with highperformance.
Electronic Truck Scale
Standard configuration of Electronic Digital Truck Scale:
weighing platform, high accuracy weighing load cell and weighing indicator. Printer, scoreboard and computer management system are optional so as to complete the requirements of data management and transmission on the higher level.
Main features of weighing platform:
1. Use U-shape beam structure, scientific and reasonable, strong and durable;
2. Undersurface uses high quality antirust paint so as to increase its service life;
3. Modular, sealed cavity, anticorrosion, convenient installation.
Main features of weighing indicator:
1. Use imported A/D conversion chip, which has rich practical experience in the market;
2. High resolution, can reach 1/500000;
3. Self fault diagnosis function and tare two-way recovery function;
4. Battery indication and low battery protection;
5. Can use single-layer, duplex and three-ply weight list, can be equipped with weighing software and connected to the computer.
The length of Electronic Truck Scale is from 1m to 30m.
The width of Electronic Truck Scale is 3.0m, 3.2m, 3.4m.
The maximum weighing capacity can be 1 ton to 150 ton.
S type load cell, tension and compression good output symmetry, compact structure, simple to install, full range of capacities, suitable for electromechanical scale, crane scale, hopper scale and various special scales.
This model is mainly used for balancing rotating work pieces, Such as large and medium- sized motor rotors, blowers, pump impellers, centrifugal, drying cylinders, and rollers, mine ventilator etc. The gimbals -driving offers several rotational speeds, large driving power, high precision and easy operation etc.
Specification Parameter:
Mass scope of workpiece(kg) 2000
Mass diameter of workpiece(mm) 1800
The distance between two bearing pedestals(mm) Min100
Journal diameter on roller carriages(mm) 40-240
Distance from coupling flange of drive shaft to center of farthest bearing (mm) 1800
Spindle speed(r/min) 280/560/900/1800
Motor Power(kw) 7.5(variable-frequency)
Universal coupling torque(N.m) 300
Minimum achievable Residual Unbalance(emar) 1g.mm/kg.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, turbocharger,textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate.
Specifications:
Parameters
Max Mass of Workpiece (kg)
50
Max Diameter of Workpiece (mm)
700
Distance between Two Support Bearings (mm)
80--700
Journal Diameter Scope of Workpiece (mm)
8~80
Diameter Scope of Driving Belt (mm)
18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min)
650/1000/1300/2000
Motor Power (kw)
0.55/0.75
Min Achievable Residual Unbalance Amount (emar)
0.5g mm/kg
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, impeller,roller,textile machinery, fans, shaft, etc. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters:
Max Mass of Work piece (kg) 160
Max Diameter of Work piece (mm) 1000
Distance between Two Support Bearings (mm) 150--1200
Journal Diameter Scope of Work piece (mm) 10~140
Diameter Scope of Driving Belt (mm) 30~350
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 798/1274/1596/2548
Motor Power (kw) 1.3/1.8
Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters
Max Mass of Workpiece (kg) 50
Max Diameter of Work piece (mm) 700
Distance between Two Support Bearings (mm) 80--700
Journal Diameter Scope of Work piece (mm) 8~80
Diameter Scope of Driving Belt (mm) 18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000
Motor Power (kw) 0.55/0.75
Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg.
Item No. DB-02
Description
1) Capacity: 20kg/5g
2) Powered by 4 x AA Batteries(Not Included)£¬ with 4 Load Cells.
3) With Memo Function
4) Unit: kg/lb
5) Product Size: 60.3x38.5x10cm.
