Product Properties
Density: 0.96±0.03 g/ml
Colorï¼?Clear, Whiteï¼?black
Sag degree upright and parallel: No sag when applying
Surface forming timeï¼?â?¤15min
Tensile strengthï¼? â?¥0.6mpa
Elongation at breakï¼?â?¥350%
Application Rate: â?¥80ml/min
Shore A Hardness: 13~23
Temperature resistance: -20-90
COPALTITE Sealant Cement/Liquid 5 OZ is provided by Dongfang Yoyik. Our company mainly offer spare parts of power unit, including thousands of types and models, for power plants, steel mills, cement mills, chemical plants and shipyards. Our products can be applied various systems from EHC, TSI, MEH, DCS, to excitation system and hydrogen oil water system.
COPALTITE Sealant Cement/Liquid 5 OZ
Inlet Sealing A350P21
BFP lube filter QF9732W25HPTC-DQ
JOINT BEARING W.24.A.0050
Mechanical seal HPT 300-340-6S
EH oil pump suction filter DS103EA100V/W
bellows relief valve BXF-40
SWING STEM M181.231.062
Cap Nut M237-265000A031
COPALTITE Sealant Cement/Liquid 5 OZ
Sealing ring D600B-511500B
LVDT Position Sensor HTD-50-3
bolt stud 00D010127A015
Shaft Sealing Ring CFW1
SCREW D600B-099500A011
Screw jack of CSG D00.010.303
HT Grooved Nut GH3 M237-265000A010
Linking Level For Actuator A150Z09010E
LVDT Position Sensor HTD-400-6
Rotation Speed Sensor SZCB-01
balance piece 3Q7865
SEAL,STEAM,IP3RD DIAPHRAGM D600B-098170A
Sensor DET-600B
Current carring bolt (slip ring position) 3Q4343
Cover Nut D00.010.014
Cover Nut B1320B-021000A001
Sealing gasket D220B-231000A003
Leaf spring 105 D00.160.008
Lock pin M231.265.014
High pressure hose for Stator cooling water pump YCZ50-250C/L=600mm
HP guide steam pipe flange gasket D600C-029800A010
SCREW OF RATING PLATE GB827L-86
Bolt GB0000898C1680
COPALTITE Sealant Cement/Liquid 5 OZ
ã??2019-05-30-DFJerryã??
LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
INSTRUCTIONS
l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft,
l Joint width/depth ratio should be 2:1 (Table 1),
l If necessary, use back up material to adjust joint depth,
l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate.
STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C
CAS No.:24969-06-0
Other Names:epoxy sealant
MF: mSiO2nH2O
EINECS No.: 231-545-4
Place of Origin:Shanghai, China (Mainland)
Classification:Double Components Adhesives
Main Raw Material:Epoxy
Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons
Brand Name: SEPNA
Model Number:SE2202
Type:Two Component
Name:liquid epoxy resin adhesive
Mixture ratio: A:B=100:20
Viscosity of mixture:900~1300
Preliminary Cured:4~6 25°C, hours
Cure condition:25°C/ 24 hour; 80°C/ 2~3 hour
Hardness:>85 Shore D
Thermal conductivity: 0.35 W/mK
ODM/OEM:Accepted
Shipping:By Express(Fedex, UPS ,DHL,TNT)
Samples::Free samples
Packaging & Delivery
Packaging Details:Package for Thermally Conductive liquid epoxy resin adhesive
Black/White color
Part A-25 KG/Bucket,
Part B-5 KG/ Pot
Delivery Detail:10 days
British Standard5889 2989 type b
US FEDERAL TT.S DO 1543A Class A
translucent & Black colour approved by the national water council , for use with potable water
HP2788 structural silicone sealant is a one component, high strength, high modulus, neutral cure silicone sealant that is specially used in the curtain wall system as structural assembly, it has excellent adhesion in the most of the structural assembly applications without requiring primer.
Various properties about excellent liquidity, good work-ability, good tensile?force, with no deformation, heat resistant, acid and alkali resistant. Can be used repetitively. 2.Specification Silica gel is mixed with curing agent, the appearance of molding silica gel is liquid, A substitutes silica gel, B substitutes curing agent. For example, 100g A add 2g curing agent, but it needs to note, A and B must be mixed averagely, if not, the molding will not cure completely, and heterogeneous silica gel can affect its life time and result in that the molding will be completely scrapped.
Cnhybond944 primer developed from our company is a kind of clear light brown liquid. It can be used to promote adhesion of double sided adhesive to surfaces such epdm, tpu, pvc, polyethylene, polypropylene, abs, pet/pbt blends, concrete, wood, glass, metal and painted metal surfaces, especially with acrylic foam(vhb) tapes, the bonding effect will be better. Tape primer 944 is an adhesion promoter for use in conjunction with automotive restyling vinyl, vehicle graphics and wraps. Help protect vinyl against lifting when used for vehicle graphics, stripes and wraps.
Feature:speed up free tack time, promote the adhesion
It can replace 3m 94, 3m k-520/k-500, 3m 4298uv, 3m ap111, 3m 4299 tape primer/adhesion promoter.
Application: primer 944 is use to improve vinyl adhesion where vinyl will be stretched or heated into concave area. For best results apply a thin layer of primer 944 over most of the concave area. For convex area apply a thin layer at outer edges of the curve to prevent the film edge, lifting. Great for use on complex vehicle contours. Work with all brands of vinyl.
Cnhybond944 primer developed from our company is a kind of clear light brown liquid. It can be used to promote adhesion of double sided adhesive to surfaces such epdm, tpu, pvc, polyethylene, polypropylene, abs, pet/pbt blends, concrete, wood, glass, metal and painted metal surfaces, especially with acrylic foam(vhb) tapes, the bonding effect will be better.
Feature:speed up free tack time, promote the adhesion
Surfaces of bonding materials:pp, epdm, tpu, pvc, abs, pet/pbt/blends, concrete, wood, glass, metal and so on.
It can replace 3m 94, 3m 4298, 3m k-520/k-500, 3m 4298uv, 3m ap111, 3m 4299 tape primer/adhesion promoter.
Performance, a wide the operating temperature range (-40 ¡æ ~ + 120 ¡æ), and the cold is not hard, good sealing performance, wear-resistant and durable.
¡¡¡¡weixian hezhuang rubber sealing strip co., ltd production locomotive doors and windows sealed, epdm rubber seal, building doors and windows sealed, thermoplastic elastomer seal, hard and soft co-extruded seals, glass curtain wall
Sealing strip, fire expansion seals, fire seals, 3m adhesive self-adhesive sealing strip, steel core, dense foam composite seal, rubber dust cover, rubber bellows, a variety of rubber tubes, by domestic and foreign merchants.
Silicone sealant characteristic
1. High strength silicone sealant with long shelf life, designed and tested for the construction and structurally
Glazed curtain wall.
2. Cures at room temperature under the action of cross linker and catalyst in part ii to give a permanently flexible silicone rubber.
3. Silicone sealant is two-component.
4. Neutral solidification, no corrosion to the construction materials as coating glass, metal, coagulation, marble
And granite etc.. It is a special silicone sealant designed for the installation and fixation of caviti-glass.
5. High modulus, strength and adhesive property to meet the demand of the installation and fixation of
Caviti-glass.
Color & package:
Part i: 190l white
Part ii: 19l black
A component 200l iron drum
B component 20l plastic drum
Or a component 20l plastic drum
B component 250ml plastic tube or 310ml plastic tub
1)100% pure silicone with rosh, sgs, fda
2)portable, durable and washable
3)with sanitizer easy to carry
4)competitive price and high quality
5)customer designs are welcome
6)exsiting mode:29ml, 30ml, 45ml
7)our compang main products, enjoy high demand oversees as result of its factory prices and high supply ability.
0pcs/opp, 1500pcs/ctn, ctn size:48*43*38cm, gw:16.5kgs/ctn
Or 50pcs/opp, 100pcs/ctn, ctn size:42*43*26cm, gw:12kgs, can be customized.
Silicone oven rack edge guard!
Includes 2.
Makes scorching hot oven shelves cool to touch for sliding out without the need for cumbersome oven mitts.
ck edges.
* great for daily use.
* helps minimize exposure to hot oven rack edges.
* just clip on oven rack edges.
* made out of heat resistant silicone.
Cushion, protect, and organize delicate surgical instrument for sterilization. Perforations allow for proper exposure and ventilation during sterilization. The silicone pin mats can also be cut into smaller sections to fit any size basket or box.
Perforated to allow proper exposure and ventilation during sterilization
The user can easily cut the mat to fit their specific needs
?chocolate heart mold; made from 100-percent food grade silicone
?durable and versatile; can be used for cooking in a traditional oven or microwave or freezing
?can go straight from the freezer to the oven
?can be used in temperatures from-76 degree f to as high as 446 degree f
?made in italy; dishwasher safe
Size: 20*10*1.5cm
Chocolate size: 3*3*1.2cm
Weight: 50g about
7kg per paper barrel, diameter being 160mm or 180mm , 4 barrel /carton
Suggest:
While application together with joinleader other corresponding products, it has already showed perfect function both in testing and practicing.
Storage: with a shelf life of 12 months in dry, ventilated and shady places below 32¡ãc
Refer to product packaging for "use by" or expiry date.
Limitation:
Only suitable for those mentioned products above and do test before application
Certificate:
Msds, iso9001.
Performance of butyl sealant
Clean and dry adhesion surface to get rid of dirty, oily things. Lfz28 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 120¡ãc~150¡ãc. The environment temperature should not be lower 10¡ãc in application.
Package of butyl sealant
Lfz28 butyl sealant for insulating glass primary seal, black, 1kg/paper pail, 5kg/pail, 7kg/pail or supply according to customer required.
Lfz21 is a kind of two-part polysulphide sealant with high performance widely used for insulating glass, construction, transportation and refrigeration field.
Performance polysulphide sealant
Lfz21 polysulphide sealant has excellent elasticity, low gas permeability and adherent stability. The property is certificated by gb/t11944-2002, jc/t486 standard.
Excellent weatherproof , no corrosion, no poisonous.
Package polysulphide sealant
Composition a 200l iron drum 330kg/drum ( =571.5mm)
Composition b 20l plastic drum 30kg/drum ( =280mm or 285mm)
Or composition a 20l plastic drum 33kg/barrel
Composition b 3kg/barrel
Storage polysulphide sealant
Store at the dry and cool area in airtight container. When stored at or below 27¡ãc in the original unopened containers, this products has a shelf life of 9 months from the date of production.
Packge: iron drum a component:200l/iron drum 330kg/drum b component:20l/iron drum 30kg/drum or a component:20l/plastic drum 33kg/barrel b component:3kg/barrel
550 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
