ATMP Liquit
Appearance: colorless or light yellow transparent liquid
Active acid %: 48.0-52.0
Chloride (as Cl-)%: 2.0(or1.0) min
pH value (1%solution): 2.0 max
Fe (as Fe3+) (ppm): 20
Density (20C)g/cm3: 1.33 min
Colour APHA (Hazen): 40 max
ATMP Solid:
Appearance: White crystal powder
Active acid %: 95min
Chloride (as Cl-)%: 1.0 min
pH value (1% solution): 2.0 max
Fe (as Fe3+) (ppm): 20
Density (20f+)g/cm3
Colour APHA (Hazen).
Properties of MA/AA:
MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300C). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.
Specification of MA/AA:
Appearance Clear brown liquid Amber transparent liquid
Solid content % 48 min 50 min
Free monomer (MA) % 9.0 max 5.0 max
Density (20C)g/cm3 1.18 min 1.18min
pH(1% solution) 2.0~3.0 2.0+/-1.0
Usage of MA/AA:
MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Package and Storage of MA/AA:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Safety Protection of MA/AA:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Properties
Benzalkonium Chloride is a kind of cationic surfactant, belonging to nonoxidizing boicide. 1227 can efficiently withhold algae propagation and sludge reproduction. Benzalkonium Chloride also has dispersing and penetrating properties, can penetrate and remove sludge and algae, has advantages of low toxicity, no toxicity accumulation, soluble in water, convenient in use, unaffected by water hardness. Benzalkonium Chloride can be also used as anti-mildew agent, antistatic agent, emulsifying agent and amendment agent in woven and dyeing fields.
Specification
Appearance
Colorless to pale yellow transparent liquid
Light yellow transparent liquid
Light yellow waxy solid
Solid content % 44.0 min 80 min88 min
Amine salt % 2.0 max 2.0 max2.0 max
pH(1% water solution)6.0~8.0(origin) 6.0-8.06.0-8.0
Usage:
As nonoxidizing boicide, dosage of 50-100mg/L is preferred; as sludge remover, 200-300mg/L is preferred, adequate organosilyl antifoaming agent should be added for this purpose. This product can be used together with other fungicidal such as isothiazolinones, glutaraldegyde, dithionitrile methane for synergism, but cannot be used together with chlorophenols. If sewage is appeared after thrown of this product in circulating cool water, the sewage should be filtered or blown off in time to prevent their deposit in bottom of collecting tank after froth disappearance.
No blending with anion surfactant.
Safety Protection:
A little smell of almond, no visible stimulation to skin. When contacted, flush with water.
Hedp is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, hedp is used as detergent for metal and nonmetal. In dyeing industry, hedp is used as peroxide stabilizer and dye-fixing agent; in non-cyanide electroplating, hedp is used as chelating agent. The dosage of 1-10mg/l is preferred as scale inhibitor, 10-50mg/l as corrosion inhibitor, and 1000-2000mg/l as detergent. Usually, hedp is used together with polycarboxylic acid.
Package and storage of HEDP:
Hedp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required hedp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Properties:
PESA is a multivariate scale and corrosion inhibitor with non-phosphor and non-nitrogen, PESA has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious.
PESA has good biodegradation properties, PESA can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. PESA can be operated under high concentration index. PESA has good synergism with chlorine and other Water Treatment Chemicals.
Specification:
Appearance Colorless or amble transparent liquid
Solid content % 40.0 min
Density (20C)g/cm3 1.28 min
pH(1% water solution) 9.0-12.0
Usage:
PESA can be used in system of oilfield refill water, crude oil dehydration and boiler;
PESA can be used in circulating cool water system of steel, petrochemical, power plant, medicine.
PESA can be used in boiler water, circulating cool water, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index.
PESA can be used in detergent fields.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Safety Protection:
Alkaline, Avoid contact with eye and skin, once contacted, flush with water.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
2485 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
Formula :C3O3N3Cl2Na
CAS NO. 2893-78-9
Application :As a kind of disinfectant,it can sterilize drinking water,swimming pool,tableware and air,fight against infectious diseases as routine disinfection, act as disinfectant in raising silkworm, poultry and fish, and clean the industrial circulating water
Referenced price:USD1200/MTFOBQINGDAO
Payment :L/c at sight or t/t or d/p at sight
Shipment:prompt
Delivery time: at most 30 days
Dosageform: White powder, granular, or flake
Effective Cl: 50úÑú¡60úÑ
Unsolvable Matter%:í_ 0.1%-0.5%
PH(1% solution): 5.5-6.5
Granular: 8~30mesh,20~60mesh,(or decided by customer)
Flake :5g/flake,15g/flake,50g/flake,200g/flake
Formula :c3o3n3cl3
Cas no. 87-90-1
Un no. 2468
Application : with strong bleaching and disinfection effects, widely used as high effective disinfectant for civil sanitation, animal husbandry and plant protection, as bleaching agent of cotton, gunny, chimical fabrics, battery material, organic synthesis industry
Payment: l/c at sight or t/t or d/p at sight
Referenced price: usd1300/mtfobqingdao
Shipment: prompt
Delivery time: at most 30 days
Dosageform :white powder, granular, or flake
Effective cl :í²90%(excellence)ííííí²88%(qualified)
Water content% :ín0.5(excellence)ííííín1.0(qualified)
Ph(1% solution) :2.6ú¡3.2
Granular :8~30mesh, 20~60mesh, (or decided by customer)
Flake :1g/flake, 5g/flake, 15g/flake, 50g/flake, 200g/flake, (or decided customer)
Formula :HNO3
UN NO. 2031
Applications :Can be used in medicine, dyestuff, equipment for taking photos. It is also one of the important materials of explosive industry.
Payment :L/c at sight or t/t or d/p at sight
Referenced Price:USD386/MTFOBQINGDAO
Shipment: On Time
Delivery timeú+at most 30days
Appearance: Light yellow, transparent liquid
Physicochemical characteristics :The specific gravity is 1.368-1.486 when the temperature is 20. It is strong oxidizer, a kind of strong acid with strong causticity. It is easy to be decompounded when heated.
Safety requirement : For its strong oxidizer, it should not be touched by organic substance. For its strong causticity, protective articles should be worn. The fire caused by nitric acid (cone) should be extinguished by sandy soil, carbon dioxide and washed by large amount of water. At the same time, toxicosis of nitrogen oxide should be avoided.
net weight :35KG
Property:
Appearance: Bronopol is supplied as crystals or crystalline powder, which may vary from white to pale yellow in colour depending on the grade of material being offered.
Melting point: As a pure material, Bronopol has a melting point of about 130¦C. However due to its polymorphic characteristics, Bronopol undergoes a lattice rearrangement at 100 to 105¦C and this can often be wrongly interpreted as the melting point.
At temperatures above 140¦C Bronopol will decompose exothermically releasing Hydrogen bromide and oxides of Nitrogen.
Solubility: Bronopol is readily soluble in water although the dissolution process is endothermic. Solutions containing up to 28% w/v are possible at ambient temperature.
Bronopol is poorly soluble in non-polar solvents but shows a high affinity for polar organic solvents.
Ma/aa --copolymer of maleic and acrylic acid
Cas 26677-99-6
Specification of ma/aa:
Appearance clear brown liquid amber transparent liquid
Solid content % 48 min 50 min
Free monomer (ma) % 9.0 max 5.0 max
Density (20c)g/cm3 1.18 min 1.18min
Ph(1% solution) 2.0~3.0 2.0+/-1.0
Usage of ma/aa:
Ma/aa is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. Ma/aa can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/l is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
CAS No.: 15827-60-8.
Molecular Formula: C9H28O15N3P5
Molecular weight: 573.2
Properties:
DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines.
Specification:
items index
Appearance Brown transparent liquid
Active acid % 48.0-52.0
Phosphorous acid (as PO33-)% 3.0 max
Chloride (as Cl-)% 12-17
Density (20íµ) g/cm3 1.35-1.45
pH (1% solution) 2.0
Fe ppm 35 max.
Dosage form white powder, granular, or flake
Effective Cl 90%(excellence)88%(qualified)
Water content% 0.5(excellence)1.0(qualified)
Ph(1% solution) between 2.6 and 3.2
Granular 8~30mesh, 20~60mesh, (or decided by customer)
Flake 1g/flake, 5g/flake, 15g/flake, 50g/flake, 200g/flake, (or decided by customer)
Payment l/c at sight or t/t or d/p at sight.
Formula :c3o3n3cl2na
Dosage form : white powder, granular, or flake
Effective cl :between 50 and 60
Unsolvable matter%: 0.1%-0.5%
Ph(1% solution) :5.5-6.5
Granular :8~30mesh, 20~60mesh, (or decided by customer)
Flake ;1g/flake, 5g/flake, 15g/flake, 50g/flake, 200g/flake, (or decided by customer)
Payment :l/c at sight or t/t or d/p at sight.
1. It is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
2. It can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
3. It also can be used in the production process of paper & pulp as retention agent.
Application methods
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The ph value of the waste water should be adjusted to 7-10 for better result.
3. When the colority and cod are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process.
Package and storage
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 25kg, 50kg, 250kg and 1250kg.
3. Storage temperature: 10-30 f¦.
Specification of PBTCA:
AppearanceColorless or light yellow transparent liquid
Active acid %50.0 min
Phosphorous acid(as PO33-)%0.8 max
Phosphorous acid(as PO43-)%0.5 max
Density (20 C) g/cm31.27 min
pH(1% solution)1.5~2.0
CAS No. 6419-19-8
Molecular formula: N(CH2PO3H2)3
Molecular weight: 299.05
Properties of ATMP:
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. ATMP can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, ATMP has good corrosion inhibition.
ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, ATMP can be used in woven & dyeing industries and as metal surface treatment agent.
Specification of ATMP:
Appearance of ATMP
colorless or light yellow transparent liquid
White crystal powder
Active acid % of ATMP
48.0-52.0
95min
Chloride (as Cl-)% of ATMP
2.0(or1.0) min
1.0 min
pH value (1%solution) of ATMP
2.0 max
2.0 max
Fe (as Fe3+) (ppm) of ATMP
20
20
Density (20C)g/cm3 of ATMP
1.33 min
-
Colour APHA (Hazen)of ATMP
40 max
-
Usage of ATMP:
ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred.
Package and Storage of ATMP:
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection of ATMP:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Keywords: ATMP
Related Products: Amino Trimethylene Phosphonic Acid (ATMP)
Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP.Na5)
Tetra sodium salt of Amino Trimethylene Phosphonic Acid (ATMP.Na4)
Potassium salt of Amino Trimethylene Phosphonic Acid (ATMP.Kx)
Expolube ûinhibit
A bacterial inhibitor for soluble cutting fluids
ôsolubleö cutting oils used as coolant-lubricant in high speed metal cutting, grinding, rolling, etc., are vulnerable to
æù after emulsification with water. Microbial activity causes the oil emulsion to become progressively unstable due to emulsifier breakdown, this finally leads to the separation of free oil droplets which coalesce to form ætramp oilÆ floating on the surface of the fluid in the coolant well. Concomitantly, the ph of the emulsion falls, introducing a corrosive propensity in addition to the loss of lubricity. The economic justification for control of microbial degradation of cutting fluids by the addition of biocides devolves from the extended useful life of the emulsion that results, fewer rejects than would otherwise eventuate, prevention of foul odours and thus maintenance of hygienic working conditions for personnel.
Hydrolyzed polymaleic anhydride (hpma)
Cas no.: 26099-09-2
Structural formula:
Properties:
Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement.
Specification:
Items Index
Appearance Clear to umber transparent liquid
Solid content % 48.0 min
Bromine value mg/g 80.0 max
Average molecular weight 450 min
Phú¿1úÑ solutionú¬ 2.0-3.0
Density ú¿20íµú¬g/cm3 1.18 min
Usage:
Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.
Package and storage:
Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place.
Safety protection:
Acidity, avoid contact with eye and skin, once contacted, flush with water.
