Bronopol for water treatment
1.Chemical name: Poly Acrylamide (PAM) 2. CAS: 9003-05-8 3.Performance:White crystal 4. Application: polyacrylamide (PAM) is one of the most widely used water-soluble polymers. It is widely used in oil exploitation, papermaking, water treatment, textile, medicine, agriculture and other industries. There are three forms of polyacrylamide products: aqueous colloid, powder and emulsion. According to the characteristics of ions, it can be divided into four types: non-ionic, anionic, cationic and amphoteric. 5. Methods of use: before use, prepare the product with deionized water to a solution of 2-5 thousandth of molecular weight according to the proportion of use. In the process of configuration, the agitation should not be too intense, so as to prevent the polymer chain of the product from breaking due to the shear action and affect the use effect of the product. The prepared product solution should be prepared and used first, and the storage time should not exceed 24 hours. The simulated screening in the laboratory can determine the approximate dosage of the product, but it is necessary to adjust the super final dosage according to the site conditions. V. packaging and storage: kraft paper bag for external use, with plastic film package inside, net weight of each bag is 25kg, which can also be modified according to the user's requirements. The product is hygroscopic and should be stored in a cool and dry place with temperature lower than 35 ºC. Solid products shall not be scattered on the ground to prevent the ground from sliding after the product absorbs moisture. 6. Safety protection: pay attention to labor protection during operation, and avoid contact with skin, eyes, etc. 7. Specifications: ITEM Index Type 1 Type 2 Solid content (solid),w/% â?¥ 90.0 88.0 Acrylamide monomer content w/% â?¤ 0.025 0.05 Dissolution time (anionic) /min â?¤ 60 90 Dissolution time (non-ionic) /min â?¤ 90 120 Screen residue (1.00mm screen),w/% â?¤ 5 10 Screen residue (180 μ m screen),w/%â?¥ 85 80 Insoluble (anionic),w/% â?¤ 0.3 2.0 Insoluble (non-ionic),w/% â?¤ 0.3 2.5
It is a disinfecting efferverscent tablet.Kill Candida albicans, Staphylococus aureas. Sterilization of the surface of objects. Way To Use: Take 1 tablet of TCCA, put it in 1000ml of water (Effect on 200square meters of use area). Spray and disinfect after dissolving.
Product Description : High-Tech development area, Zhengzhou,China Price of product ( USD price or FOB price) : USD 1.9-2.9 per tube Product origin : High-Tech development area, Zhengzhou,China Key Specifications/Special Features : Way To Use: Take 1 tablet of TCCA, put it in 1000ml of water (Effect on 200m2 of use area). Spray and disinfect after dissolving. Certification: CE Port of Loading: Payment Term: China Delivery Time Shipment: Minimum Order Size and Packaging details : Min.order quantity:10000 tubes . Packing:100 tubes/cartons. Carton size: 37 * 35.5 * 17 cm; Gross weight: 11 kg; Daily Output: 50000 tubes
Bonnafide Chemicals is a trusted name when it comes to world class Water Treatment Chemicals. The premium quality Water Treatment Chemicals supplied by us have been widely used for processing and management of problems associated with the treatment of industrial waste water. The high effectiveness and pure quality of the water treatment chemicals offered by us have placed us among the eminent Water Treatment Chemicals trader and suppliers Kanpur, Uttar Pradesh.
Carboxylate-Sulfonate-Nonion Tri-polymer XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. Vcycletech XT-3100 is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. XT-3100 is a all organic dispersant and scale inhibitor,XT - 3100 has good inhibition for dry iron oxide and hydrated ferric oxide.As a excellent anti-scaling agent, XT - 3100 can also be used as a stabilizer phosphate or phosphonic acid salt corrosion inhibitors  (Similiar to RohmHaas ACUMER 3100) Specification: items index Appearance Light amber liquid Solid content % 43.0-44.0 Density (20)g/cm3 1.15min pH(1% water solution) 2.1-2.8 Usage: Carboxylate-Sulfonate-Nonion Tri-polymer can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be determined by experiment. Package and Storage: 200L plastic drum,IBC(1000L),customers requirement. Storage for ten months in shady room and dry place. Safety Protection: Acidity, avoid contact with eye and skin, once contacted, flush with water.
XT-5000 is a superior scale inhibitor and dispersant. It has good inhibition for silica and magnesium silicate when used in recirculation cooling circuits and boilers. It is a superior phosphate scale inhibitor for dry or hydrated ferric oxide. Acting as rust inhibitor, XT-5000 can also be used in systems like industrial RO, pools and fountains etc Specification: Items Index Appearance Amber liquid Solid content % 44.5-45.5 Density (20)g/cm3 1.15-1.25 pH(1% water solution) 2.5 4.0 We can supply high quality and cheap carboxylate-sulfonate copolymer. When used alone, the dosage of 15-30mg/L. Vcycletech Carboxylate-Sulfonate Copolymer Usage: When used alone, the dosage of 15-30mg/L. When used as dispersant in other fields the dosage should be determined by experiment. Package and Storage: Normally in 25kg or 250kg net plastic drum. Storage for 10 months in room shady and dry place. Safety: Weak acidity, avoid contact with eye and skin. Once contacted, flush with water.
Our company is committed to providing high quality and reliable chemicals and additives for water treatment, petroleum exploitation, textile printing and dyeing, paper making/printing, daily chemical industry, etc. - Poly Aluminum Chloride,PAC CAS:1327-41-9 - Acrylic Acid Polymer,PAAS CAS:9003-04-7 - Acrylic Acid-2-AcrylaMido-2-Methylpropane Sulfonic Acid Copolymer ,AA/AMPS,CAS:40623-75-4 [Acrylic Acid/AMPS,CAS:40623-75-4] - Xanthan Gum,CAS:11138-66-2
Technical specifications available on request. Buyer or buyer's representative to fill in a "requirements form" on the basis of which a "SCO" will be provided. Price is determined by quantity. According to buyer's requirements.
We offer a wide range of high performance industrial and process water and waste water treatment chemicals. These chemicals have been specifically developed to significantly improve the management problems commonly associated with the treatment of industrial and process waters. Our treatment have been specifically formulated for the effective treatment of boilers, cooling towers and cooling water systems; wastewater and industrial effluents. The broad range of water treatment chemical supply includes HEDP 60%, DETPMP and ATMP.
Sodium dichloroisocyanurate Synonyms: Dichloroisocyanuric acid sodium salt CAS No.: 2893-78-9 Molecular Weight: 219.95 Molecular Formula: C3Cl2N3NaO3 Application: Sodium dichloroisocyanurate is suitable particularly in smaller cooling water systems and drinking water / public water supply systems for algaecide and germicide processing. Specification: Appearance: White crystalline powder Active chlorine (%): 56min. pH (1% aqueous solution): 5.5- 7.0 Solubility (25¨ªpC, g/100g water): 25 Standard Packing:25kg net/woven bag or paper drum Safety Information: Sodium dichloroisocyanurate is harmful if inhaled and/or swallowed. It is suggested to wear suitable protective clothing, gloves,
Characters Oxidizing biocide with low toxicity,fast and long time effect,strong penetrability,easy handle with good price. Applicable temperature and pH range is wide,be good at biocide,ordor removal,biological slime removal. Physical Properties Appearance:Light yellow transparent liquid Active chlorine (as Cl- ) content:â?§10.0% Free alkali ( calculated as NaOH ):1.0% pH:â?§9.0 Packaging and Storage 25kg/drum,seal and cool,Stack height no more than three layers Expire Date: 6 months Details please take MSDS and COA as reference.
Characters Suitable for all aromatic polyamide film and acetate film; Contains strong chelating agent to promote the dissolution of metal deposits; Contains buffering agent to inhibit pH changing, keep pH between 2.0 and 4.0; Mix with water rapid lead to the reduction of cleaning time; Be able to miscible with water by any ratio; Physical Properties Appearance:Colorless to light yellow liquid Density (20 °C):1.12±0.05 g/cm3 pH(1.0%):2.0ï½?4.0 Solubility:completely soluble in water Packaging and Storage 25kg/drum,seal and cool; Expire Date: 3 years Details please take MSDS and COA as reference
Reverse Osmosis Antiscalants TRISPE 1000 - Appearance: colorless to pale yellow liquid - Density (20 �C): 1.20�0.05 g/cm3 - pH (1.0%): 1.53.5 - Solubility: completely soluble in water RO cleaner,Biocide,defoamer,membrane antiscalant mdc 200
Alum:(Ammonia Alum) for water treatment. Chemical Formula Al2(SO4)3 (NH4) 2SO4 24H20 Packing : 25 Kgs & 50 Kgs HDPE Laminated bags with thick inner liner. Physical Property : White transparent Glass types Lumps. Crystals & Powder. Chemical Property : Water insoluble l% max., Iron Compound 0.2%, max Aluminum content as Al203 15 to 16%, pH of 5% solution 2 to 2.5
Ferric Alum : (Aluminum Sulphate) Chemical Formula Al2 (SO4)3 18H20 Packing : 25 Kgs & 50 Kgs HDPE Laminated bags with thick inner liner. Physical Property : Slight yellowish lumps. Chemical Property : Water insoluble 2% max. Iron compound 0.5% max. Aluminum contents as Al203 15 to 16%, pH of 5% solution 2 to 2.5
Non Feric Alum: (Aluminum Sulphate): Chemical Formula Al2 (SO4)3 18H20 Packing : 25 Kgs & 50 Kgs HDPE Laminated bags with thick inner liner. Physical Property : White lumps or powder. Chemical Property : Water insoluble 1 % max. Iron compound 0.1 % max. Aluminum contents as A1203 16 to 17 %, pH of 5% solution 2 to 2.5
Alumina Hydrate : (Aluminium Hydroxide) : Chemical Formula Al (OH)3 U.N.No.2463 Packing : 50 Kgs HDPE Laminated bags with thick inner liner. Physical Property : White Powder containing 4 to 5% moisture. Mesh size 200. Chemical Property : % of material as Al(OH)3 is 94-95%. Na2O contain 0.25 to 0.30%. Silica as SI02 - 0.012 to 0.015%. Fe2O3 0.010 to 0.015%. Uses : Glass, Ceramics, Iron-free aluminum and aluminum salts.
Ammonium Hydroxide : (Liquor Ammonia) NH40H Packing: In HDPE Carboys & Drums. Property: Colorless liquid, Strong odor, Concentration of Solution range up to about 30% ammonia. Chemical Property: Sp.Gr. 0.9 having strong smell of ammonia, Alkaline in nature pH.9-10. Uses: Textiles manufacturing of rayon rubber, fertilizers, ammonia soaps, fireproofing wood, ink manufacturing etc.
Reverse Osmosis Antiscalants TRISPE 1000 - Appearance: colorless to pale yellow liquid - Density (20 °C): 1.20±0.05 g/cm3 - pH (1.0%): 1.5ï½?3.5 - Solubility: completely soluble in water RO cleaner,Biocide,defoamer,membrane antiscalant mdc 200
