Polyacrylic acid (paa) Cas 9003-01-4 Properties of paa: Paa is innoxious and soluble in water, paa can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification of paa: Appearancecolorless or light yellow transparent liquid Solid content %30 min Free monomer (ch2=ch-cooh) %0.5 max Density (20c)g/cm31.09 min Ph(1% solution)3.0 max 40%, 50% paa are also supplied. Usage of paa: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Package and storage of paa: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place. Keywords: paa Related products: polyacrylic acid (paa) Polyacrylic acid sodium (paas) Polyhydric alcohol phosphate ester (pape) Paa, paas, pape, polyacrylic acid, polyacrylic acid sodium, polyhydric alcohol phosphate ester Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
Amino trimethylene phosphonic acid Tetra sodium salt of amino trimethylene phosphonic acid (atmp.Na4) Cas no. 20592-85-2 Molecular formula: c3h8no9p3na4 molecular weight: 387 Properties of atmp.Na4: Atmp.Na4 is the salt of atmp, it can inhibit the scale formation, calcium carbonate in particular, in water system. Atmp.Na4 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system. Atmp.Na4 has good synergistic effects with other additives, in neutral to acidic condition, no ammonia smell is let off. Specification of atmp.Na4: Appearance colorless or light yellow transparent liquid Active content (atmp)% 29.4-32.4 Active content (atmp.Na4) % 38.0-42.0 Ph (1% water solution) 6.5-7.5 Fe(fe3+)ppm 35 max Density (20c) g/cm3 1.35-1.45 Usage of atmp.Na4: Atmp.Na4 is used together with other organophosphonic acid, polycarboxylic acid or salt to form organic alkaline agents, it is used in circulating cool water system for all water quality. Package and storage of atmp.Na4: Normally in 250kg net plastic drum, ibc drum can also be used as required. Storage for ten months in room shady and dry place. Keywords: atmp.Na4 Related products: tetra sodium salt of amino trimethylene phosphonic acid (atmp.Na4) Penta sodium salt of amino trimethylene phosphonic acid (atmp.Na5) Potassium salt of amino trimethylene phosphonic acid (atmp.Kx) Amino trimethylene phosphonic acid (atmp) Atmp.Na4, atmp.Na5, atmp, atmp.Kx, tetra sodium salt of amino trimethylene phosphonic acid, penta sodium salt of amino trimethylene phosphonic acid, amino trimethylene phosphonic acid, potassium salt of amino trimethylene phosphonic acid Atmp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required atmp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Amino trimethylene phosphonic acid (atmp) Cas no. 6419-19-8 Molecular formula: n(ch2po3h2)3 molecular weight: 299.05 Properties of atmp: Atmp has excellent chelation, low threshold inhibition and lattice distortion ability. Atmp can prevent scale formation, calcium carbonate in particular, in water system. Atmp has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, atmp has good corrosion inhibition. Atmp is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. Atmp can decrease scale formation and inhibit corrosion of metal equipment and pipeline. Atmp can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of atmp is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, atmp can be used in woven & dyeing industries and as metal surface treatment agent. Specification of atmp: Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.095min Chloride (as cl-)%2.0(or1.0) min1.0 min Ph value (1%solution)2.0 max2.0 max Fe (as fe3+) (ppm) 20 20 Density (20c)g/cm31.33 min - Colour apha (hazen)40 max - Atmp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required atmp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients.
Polyacrylic acid sodium (paas) Properties: Paas is innoxious and soluble in water, paas can be used in situations of alkaline and high concentration without scale sediment. Paas can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paas is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Items index Appearance colorless or light yellow transparent liquid Solid content % 30 min Free monomer (ch2=ch-cooh) % 0.5 max Density (20f+)g/cm3 1.15 min Ph(1% solution) 6.0~8.0 Notes: solid content 40%, 45% and 50% are also available Usage: Paas can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/l is preferred. When used as dispersant, the dosage should be determined by experiment. Package and storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place. Keywords: paas Related products: polyacrylic acid sodium (paas) Polyacrylic acid (paa) Copolymer of phosphono and carboxylic acid(pca) 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: colorless or light yellow transparent liquid Solid content : 30 % min Free monomer (CH2=CH-COOH): 0.5% max Density (20 cnetigrade): 1.15 g/cm3 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: colorless or light yellow transparent liquid Solid content : 30 % min Free monomer (CH2=CH-COOH): 0.5% max Density (20 centigrade): 1.15 g/cm3 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300 centigrade). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: Water treatment agent Accessory detergent Appearance: Clear brown liquid amber transparent liquid Solid content: 48% min 50 %min Free monomer (MA): 9.0% max 5.0% max Density (20fª): 1.18 g/cm3min 1.18 g/cm3min pH(1% solution): 2.0~3.0 2.0+/-1.0 Usage: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330 centigrade. HPMA has obvious threshold effect under high temperature (350 centigrade) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300 centigrade with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Specification: Appearance: Clear to umber transparent liquid Solid content: 48.0% min Bromine value: 80.0 mg/g max Average molecular weight: 450 min pH(1% solution): 2.0-3.0 Usage: HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for one year in room shady and dry place.
Aa/amps is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (amps). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, aa/amps has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. Aa/amps is suitable to be used in water quality of high ph and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index. Specification: Appearance: colorless or light yellow viscous liquid Solid content: 40% min Free monomer (as aa): 0.8% max Density (20 centigrade): 1.15 g/cm3 min Ph(1% solution): 3.5-4.5 Viscosity: 90-200 mpa.S Usage: Aa/amps can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable ph value is 7.0~9.5. Aa/amps can also be used as dyeing auxiliaries for textile. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for ten months in room shady and dry place. Normally in 250kg net plastic drum, ibc drum can also be used as required
Name of products: Sodium Dichloroisocyanurate (SDIC) Effective Cl: 56% and 60% Unsolvable matter: 0.5%MAX Water content: 3.0%MAX PH (1% solution): 5.5-6.5 Powder Granular: 8-30mesh, 20-60mesh. Flakes: 50g/flake, 100g/flake, 200g/flake (or decided by customer) Packing: 25kg, 50kg plastic drum, plastic knitting bag 1000kg, 50kg fiber drum (or decided by customer).
Effective Cl: 90% MIN Water content: 0.5%MAX PH (1% solution): 2.6-3.2 Granular: 8-30mesh, 20-60mesh. Flakes: 50g/flake, 100g/flake, 200g/flake (or decided by customer) Packing: 25kg, 50kg plastic drum, plastic knitting bag 1000kg, 50kg fiber drum (or decided by customer).
It can sterilize drinking water, swimming pool, clean the industry circulating waste water, The product has high efficiency and constant performance and has no harm to human beings. It enjoys good reputation both at home and abroad. 25,50kg plastic drum,50kg fiber drum, 1000kg bag
It can sterilize drinking water, swimming pool, and clean the industrial circulating water. As disinfectant in raising silkworm, livestock, poultry and fish, and also can be used to aquiculture disinfectant, The product has high efficiency and constant performance and has no harm to human beings. It enjoys good reputation both at home and abroad. 25,50kg plastic drum,50kg fiber drum,1000kg pp bag
Sodium Bicarbonate Standard Total alkali(as NAHCO3) 99%MIN AS: 0.0001MAX Heavy metal(AS PB): 0.0005MAX Loss on Dry: 0.20%MAX PH: 8.6 Ammonium up to standard Clarity up to standard 25KG PP Bag.
Active chlorine content:65% Moisture:less than 3% Calcium chlorine:less than 10% Annual chlorine loss rate:less than 8% 40kg, 50kg plastic drum with pe within it.
Water treatment chemicals Drum 20 kg
Ph 3-4 Acdic in nature, amine base chemical with metalprotactor and corossion inhibitors Very use full for descaling
Water treatment 25kg per bag or 50kg per plastic drum
Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMPA) CAS No 15827-60-8 Dequest: 2060 Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 Structural Formula: Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acid (as PO33-)% 3.0 max Chloride (as Cl-)% 12-17 Density (20íµ) g/cm3 1.35-1.45 pH (1% solution) 2.0 Fe ppm 35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelementí»s carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí
2-Phosphonobutane -1,2,4-Tricarboxylic Acid (PBTCA) CAS No. 37971-36-1 Dequest 7000 Molecular Formula: C7H11O9P Molecular weight: 270.13 Structural Formula: Properties: PBTCA has low content of phosphoric, has structural features of both phosphoric acid and carboxylic acid group, which enable its excellent scale and corrosion inhibition properties. Its antiscale property under high temperature is far better than that of organophosphines. It can improve zinc salt solubility, has good chlorine oxidation tolerance and good composite synergy. Specification: items index Appearance Colorless or light yellow transparent liquid Active acid % 50.0 min Phosphorous acid(as PO33-)% 0.8 max Phosphorous acid(as PO43-)% 0.5 max Density (20íµ) g/cm3 1.27 min pH(1% solution) 1.5~2.0 Usage: PTBCA is a high efficient agent as scale and corrosion inhibitor. It is the excellent stabilizer for zinc salt. It is widely used in circulating cool water system and oilfield refill water system as scale and corrosion inhibitor, suitable to composite with zinc salt and copolymer. It can be used in situations of high temperature, high hardness, high alkali and high concentration index. In lavation fields, it is used as chelating agent and metal detergent. PBTCA is usually used together with zinc salt, copolymer, organophosphine, imidazole and other Water Treatment Chemicals. When used alone, the dosage of 5-15mg/L is preferred. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
