Prophylaxis is the manufacturer of stable chlorine dioxide in liquid form with purity 99%, strength 0.76% = 7600 ppm. And generates no harmful by products. Our product is highly effective for the inhibition of all type of microorganism, including bacteria and viruses as well. It also removes algae and bio film effectively.
Amino Trimethylene Phosphonic Acid (ATMP) CAS No. 6419-19-8 Dequest: 2000 Molecular Formula: N(CH2PO3H2)3 MolecularWeight: 299.05. Properties and usage: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or pale yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95min Chloride (as Cl-)% 2.0(or1.0)max 1.0max pH ú¿1úÑ solutionú¬ 2.0max 2.0max Feú¼mg/L 20.0max 20.0max Density ú¿20íµú¬g/cm3 1.33min í¬ Colour APHA (Hazen) 40max . Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water. ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP) CAS No. 2809-21-4 Dequest: 2010 Molecular Formula: C2H8O7P2 Molecular weight: 206.02. Properties: HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metalsí» surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250íµ. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active contentú¿HEDPú¬úÑ 58.0-62.0 90.0min Phosphorous acidú¿as PO33-ú¬% 2.0max 0.5max Phosphoric acid ú¿as PO43 ú¬% 0.8max 0.5max Chloride (as Cl-)% 0.01max 0.01max pHú¿1úÑ solutionú¬ 2max 2max Density ú¿20íµú¬g/cm3 1.40 í¬ Feú¼mg/L 10max 5max Colour APHA (Hazen) 40max. Usage: HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. Package and Storage: HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag,, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water. HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag,, or confirmed by clients. Storage for ten months in room shady and dry place.
Ferrous sulphate&ferric choloride are used in the effluent/sewage treatment plants.Activated carbons is used for waterpurifying systems. 50kg&25kg
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree. Use characteristics 1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption. 2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role. 3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%. 4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Anionic Polyacrylamide: It is the white powder. The APAM with the molecular weight of 4,000,000-26,000,000 has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions. Use: (1) Industrial waste water treatment: For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc.. (2) Drinking water treatment: When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter. (3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory. (4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery. (5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making. Effective pH value:7-14 Package:25kg/pack
Molecular weight (í-1002) í¦500 í¦600 í¦700 í¦800 Solid content (%) í¦90 í¦90 í¦90 í¦90 Ionic degree (20%-80%) 20-45 45-55 55-60 65-80 Residual monomer (%) 0.05-0.1 0.05-0.1 0.05-0.1 0.05-0.1 Dissolution time(min) í_50 í_50 í_50 í_50 Intrinsic Viscosity (dl/g) í¦8 í¦8 í¦8 í¦8 Appearance White powder/granule. 25kg/pack
Index name First grade product Liquid Solid Relative density(200C)í¦ 1.18-1.21 Al2O3% í¦ 10.0 29.0 Alkalinity% 60-85 60-85 Water-insoluble% í_ .0.2 0.6 pH(1% aqueous solution) í_ 3.5-5.0 3.5-5.0 Sulfate radical(SO42-)% í_ 3.5 9.8. 5 kg / pack.
Water treatment chemicals.
Specification ATMP Liquit Appearance: colorless or light yellow transparent liquid Active acid %: 48.0-52.0 Chloride (as Cl-)%: 2.0(or1.0) min pH value (1%solution): 2.0 max Fe (as Fe3+) (ppm): 20 Density (20C)g/cm3: 1.33 min Colour APHA (Hazen): 40 max ATMP Solid: Appearance: White crystal powder Active acid %: 95min Chloride (as Cl-)%: 1.0 min pH value (1% solution): 2.0 max Fe (as Fe3+) (ppm): 20 Density (20f+)g/cm3 Colour APHA (Hazen).
Properties of MA/AA: MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300C). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification of MA/AA: Appearance Clear brown liquid Amber transparent liquid Solid content % 48 min 50 min Free monomer (MA) % 9.0 max 5.0 max Density (20C)g/cm3 1.18 min 1.18min pH(1% solution) 2.0~3.0 2.0+/-1.0 Usage of MA/AA: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Package and Storage of MA/AA: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place. Safety Protection of MA/AA: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Molecular Formula: C21H38NCl Properties Benzalkonium Chloride is a kind of cationic surfactant, belonging to nonoxidizing boicide. 1227 can efficiently withhold algae propagation and sludge reproduction. Benzalkonium Chloride also has dispersing and penetrating properties, can penetrate and remove sludge and algae, has advantages of low toxicity, no toxicity accumulation, soluble in water, convenient in use, unaffected by water hardness. Benzalkonium Chloride can be also used as anti-mildew agent, antistatic agent, emulsifying agent and amendment agent in woven and dyeing fields. Specification Appearance Colorless to pale yellow transparent liquid Light yellow transparent liquid Light yellow waxy solid Solid content % 44.0 min 80 min88 min Amine salt % 2.0 max 2.0 max2.0 max pH(1% water solution)6.0~8.0(origin) 6.0-8.06.0-8.0 Usage: As nonoxidizing boicide, dosage of 50-100mg/L is preferred; as sludge remover, 200-300mg/L is preferred, adequate organosilyl antifoaming agent should be added for this purpose. This product can be used together with other fungicidal such as isothiazolinones, glutaraldegyde, dithionitrile methane for synergism, but cannot be used together with chlorophenols. If sewage is appeared after thrown of this product in circulating cool water, the sewage should be filtered or blown off in time to prevent their deposit in bottom of collecting tank after froth disappearance. No blending with anion surfactant. Safety Protection: A little smell of almond, no visible stimulation to skin. When contacted, flush with water. 25kg or 200kg in plastic barrel
Usage of HEDP: Hedp is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, hedp is used as detergent for metal and nonmetal. In dyeing industry, hedp is used as peroxide stabilizer and dye-fixing agent; in non-cyanide electroplating, hedp is used as chelating agent. The dosage of 1-10mg/l is preferred as scale inhibitor, 10-50mg/l as corrosion inhibitor, and 1000-2000mg/l as detergent. Usually, hedp is used together with polycarboxylic acid. Package and storage of HEDP: Hedp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required hedp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Properties: PESA is a multivariate scale and corrosion inhibitor with non-phosphor and non-nitrogen, PESA has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious. PESA has good biodegradation properties, PESA can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. PESA can be operated under high concentration index. PESA has good synergism with chlorine and other Water Treatment Chemicals. Specification: Appearance Colorless or amble transparent liquid Solid content % 40.0 min Density (20C)g/cm3 1.28 min pH(1% water solution) 9.0-12.0 Usage: PESA can be used in system of oilfield refill water, crude oil dehydration and boiler; PESA can be used in circulating cool water system of steel, petrochemical, power plant, medicine. PESA can be used in boiler water, circulating cool water, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index. PESA can be used in detergent fields. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place. Safety Protection: Alkaline, Avoid contact with eye and skin, once contacted, flush with water. Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Formula :C3O3N3Cl2Na CAS NO. 2893-78-9 Application :As a kind of disinfectant,it can sterilize drinking water,swimming pool,tableware and air,fight against infectious diseases as routine disinfection, act as disinfectant in raising silkworm, poultry and fish, and clean the industrial circulating water Referenced price:USD1200/MTFOBQINGDAO Payment :L/c at sight or t/t or d/p at sight Shipment:prompt Delivery time: at most 30 days Dosageform: White powder, granular, or flake Effective Cl: 50úÑú¡60úÑ Unsolvable Matter%:í_ 0.1%-0.5% PH(1% solution): 5.5-6.5 Granular: 8~30mesh,20~60mesh,(or decided by customer) Flake :5g/flake,15g/flake,50g/flake,200g/flake 25kg, 500kg, 1000kg pp bags on pallets 25kg plastic drums 50kg plastic drums 50kg fiber drums
Formula :c3o3n3cl3 Cas no. 87-90-1 Un no. 2468 Application : with strong bleaching and disinfection effects, widely used as high effective disinfectant for civil sanitation, animal husbandry and plant protection, as bleaching agent of cotton, gunny, chimical fabrics, battery material, organic synthesis industry Payment: l/c at sight or t/t or d/p at sight Referenced price: usd1300/mtfobqingdao Shipment: prompt Delivery time: at most 30 days Dosageform :white powder, granular, or flake Effective cl :í²90%(excellence)ííííí²88%(qualified) Water content% :ín0.5(excellence)ííííín1.0(qualified) Ph(1% solution) :2.6ú¡3.2 Granular :8~30mesh, 20~60mesh, (or decided by customer) Flake :1g/flake, 5g/flake, 15g/flake, 50g/flake, 200g/flake, (or decided customer) 25kg, 500kg, 1000kg pp bags on pallets 25kg plastic drums 50kg plastic drums 50kg fiber drums
Formula :HNO3 UN NO. 2031 Applications :Can be used in medicine, dyestuff, equipment for taking photos. It is also one of the important materials of explosive industry. Payment :L/c at sight or t/t or d/p at sight Referenced Price:USD386/MTFOBQINGDAO Shipment: On Time Delivery timeú+at most 30days Appearance: Light yellow, transparent liquid Physicochemical characteristics :The specific gravity is 1.368-1.486 when the temperature is 20. It is strong oxidizer, a kind of strong acid with strong causticity. It is easy to be decompounded when heated. Safety requirement : For its strong oxidizer, it should not be touched by organic substance. For its strong causticity, protective articles should be worn. The fire caused by nitric acid (cone) should be extinguished by sandy soil, carbon dioxide and washed by large amount of water. At the same time, toxicosis of nitrogen oxide should be avoided. net weight :35KG Package :Packed in aluminium pot or gallipot
Property: Appearance: Bronopol is supplied as crystals or crystalline powder, which may vary from white to pale yellow in colour depending on the grade of material being offered. Melting point: As a pure material, Bronopol has a melting point of about 130¦C. However due to its polymorphic characteristics, Bronopol undergoes a lattice rearrangement at 100 to 105¦C and this can often be wrongly interpreted as the melting point. At temperatures above 140¦C Bronopol will decompose exothermically releasing Hydrogen bromide and oxides of Nitrogen. Solubility: Bronopol is readily soluble in water although the dissolution process is endothermic. Solutions containing up to 28% w/v are possible at ambient temperature. Bronopol is poorly soluble in non-polar solvents but shows a high affinity for polar organic solvents.
Ma/aa --copolymer of maleic and acrylic acid Cas 26677-99-6 Specification of ma/aa: Appearance clear brown liquid amber transparent liquid Solid content % 48 min 50 min Free monomer (ma) % 9.0 max 5.0 max Density (20c)g/cm3 1.18 min 1.18min Ph(1% solution) 2.0~3.0 2.0+/-1.0 Usage of ma/aa: Ma/aa is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. Ma/aa can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/l is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
CAS No.: 15827-60-8. Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acid (as PO33-)% 3.0 max Chloride (as Cl-)% 12-17 Density (20íµ) g/cm3 1.35-1.45 pH (1% solution) 2.0 Fe ppm 35 max.
