Poly ferric sulfate has stable performance, excellent water purification effect and does not contain heavy metal ions and other harmful substances. It has the functions of decolourisation, deodorisation, deodorisation, odour removal, removal of heavy metal ions, radioactive substances and carcinogenic substances in water. The removal rate of COD, BOD and chromaticity is above 90%. It has good purification effect on low temperature, low turbidity and high turbidity raw water.� Websiteï¼?www.xhflocculant.com/www.xhwtm.com Poly ferric sulphate can also be used as phosphorus remover. Compared with other inorganic flocculants, the treatment cost can be reduced by 20% - 50%. Widely used in thermal power plants, coking plants, paper mills, printing and dyeing plants, electroplating plants, chemical plants and other heavily polluted wastewater treatment (because of its pH range is wider than that of polymeric aluminium chloride, suitable for pH value fluctuation of water quality).
Polyaluminum chloride usually appears as a colourless clear liquid (liquid), or a yellow, light yellow, dark brown or dark grey resinous solid (solid). Physical properties: It has high viscosity and excellent coagulation properties, as well as strong adsorption properties. It is widely used in various water treatment facilities, urban water supply plants, sewage treatment plants, industrial wastewater treatment: such as wastewater treatment in printing plants, dyeing plants, leather plants, breweries, meat processing plants, pharmaceutical plants, paper mills, etc
Polyferric Sulfate(PFS), also known as Polymeric Ferric Sulfate and Polyferric Sulphate, is an iron-based inorganic polymer coagulant. The solid is light yellow powder and is easily soluble in water; the aqueous solution is a reddish brown transparent solution. It has the advantages of high hygroscopicity, extremely high flocculation ability, fast sedimentation rate and wide application range.
Product quality meets the national standard GB15892-2020 Polyaluminum chloride is a water-soluble inorganic polymer made by hydrolytic polymerization of aluminium salts (such as aluminium trichloride, aluminium sulphate, alum, etc.) under certain conditions, with the chemical formula [Alâ??(OH)â??Clâ??â??â??]. â??. Appearance and Properties The solid presents as yellow, light yellow, brown, white and other colours of powder, granule; The aqueous solution shows different degrees of turbidity or transparency.
It is produced with high quality raw materials such as aluminium hydroxide, hydrochloric acid and calcium aluminate powder. The technical standard is in line with the national GB15892-2020 standard, and the appearance of the product is yellow powder or granule.� The product can remove bacteria, deodorant, fluorine, aluminium, chromium, oil, turbidity, heavy metal salts, in addition to radioactive pollutants, in the process of purifying a variety of water sources have a wide range of uses.
Polyaluminum chloride usually appears as a colourless clear liquid (liquid), or a yellow, light yellow, dark brown or dark grey resinous solid (solid). Physical properties: It has high viscosity and excellent coagulation properties, as well as strong adsorption properties. It is widely used in various water treatment facilities, urban water supply plants, sewage treatment plants, industrial wastewater treatment: such as wastewater treatment in printing plants, dyeing plants, leather plants, breweries, meat processing plants, pharmaceutical plants, paper mills, etc
As an important type of water treatment chemicals, polymer flocculants are mainly polymer compounds formed by a series of carefully designed and synthesized organic flocculant monomers through a specific polymerization reaction process. They are widely used in industrial wastewater treatment, domestic sewage treatment, drinking water purification, and wastewater recycling and reuse in papermaking, sugar making, textile printing and dyeing and other fields, and are of great significance to environmental protection, resource conservation and sustainable development. om
Drinking water grade polymeric aluminium chloride produced by Xinhuan Water Treatment is produced by spray drying process (powder) and roller drying type (granule). It is produced with high quality raw materials such as aluminium hydroxide, hydrochloric acid and calcium aluminate powder. The technical standard is in line with the national GB15892-2020 standard, and the appearance of the product is yellow powder or granule.Ã? The product can remove bacteria, deodorant, fluorine, aluminium, chromium, oil, turbidity, heavy metal salts, in addition to radioactive pollutants, in the process of purifying a variety of water sources have a wide range of uses. Â
1. Good water purification effect: PAC forms large flocs, fast settling speed, which can significantly improve the water clarity and remove suspended matter, organic matter, heavy metal ions in water. 2. Strong adaptability: the adaptability of polymeric aluminium chloride has a wide range of pH value, strong adaptability to the raw water, and can deal with various types of water quality. 3. Less dosage: compared with other coagulants, the dosage of polymeric aluminium chloride is less, which can reduce the cost. 4. Small corrosiveness: the corrosiveness of polymeric aluminium chloride is relatively small, and the influence on equipment and pipeline is small. 5. Easy to operate and manage: the solubility of polymeric aluminium chloride is good, it is easy to mix well with water, and it will not produce harmful gases and substances in the process of using, the operation and management is relatively simple.
Polymer flocculant is a kind of polymer compound that can make the impurity particles dispersed in the liquid phase coagulate and settle, which is polymerised by organic flocculant. Features and advantages High efficiency: polymer flocculant can quickly and effectively coagulate the suspended matter, colloid and other impurities in water into larger particles, which is convenient for subsequent sedimentation and filtration. Wide adaptability: polymer flocculant adapts to a wide range of pH value, no corrosive effect on pipeline equipment, applicable to a variety of water quality conditions. Strong decolourisation and decontamination: polymer flocculant has strong decolourisation and decontamination ability, which can significantly improve the clarity and transparency of water. Small dosage, low cost: polymer flocculant is used in small dosage, but the effect is significant, and can reduce the cost of treatment. Application field It is mainly used in the purification of drinking water and the treatment of industrial wastewater, including the treatment of oily wastewater, printing, dyeing and papermaking wastewater, smelting wastewater and other special water quality. In addition, it also has a wide range of uses in precision casting, oil drilling, tanning, metallurgy and paper making. Specifically, polymer flocculant can play the role of clarification and purification, settlement promotion, sludge dewatering, papermaking auxiliaries, filtration promotion and so on.
Canftech TA312 Is a premium grade gel type weak base anion exchange resin with acrylic matrix and tertiary amine (Dimethylamine) function group in standard Gaussian size distribution. The acrylic matrix has excellent effectiveness for adsorption and desorption of organic molecules. TA312 also has very high free base capacity. TA312 is recommended to be used for deacidification and decolorization where the longest life time is needed (such as for single cartridge uses), especially for water with high organics
Canftech TA204 Is a premium grade gel type I strong base anion exchange resin with standard crosslinked polystyrene matrix and quaternary amine (Trimethylamine) function group in standard Gaussian size distribution. Its clear gel structure make it has excellent regeneration efficiency (both in co-current and counter-current systems) and rinse performance. TA204 in chloride form could remove both strong and weak acid radicals such as sulfate, nitrate, arsenate, chromate and silicate to extreme low concentration level. Combining with strong acid cation exchange resin (in hydrogen form), TA204 in hydroxide form can be used in all types of demineralization system including condensate polishing.
Canftech TC008 Is a premium grade gel type strong acid cation exchange resin produced by sulfonated styrenedivinylbenzene (DVB) copolymers in standard Gaussian size distribution. It has excellent chemical, physical and thermal stability, and high exchange capacity. TC008 in sodium form is widely used for water softening to reduce total hardness. In hydrogen form, it also can be used for water demineralization.
Water treatment chemicals are substances used to improve the quality of water by addressing specific issues related to its composition, contamination, or intended use. These chemicals play a crucial role in various water treatment processes, ensuring that water meets specific standards for consumption, industrial applications, or environmental discharge. Rosun, as a professional water treatment products manufacturer and water treatment products supplier, provides all kinds of water treatment solutions including wastewater treatment solutions, domestic wastewater treatment, drinking water treatment, and types of swimming pool water treatment. To do the above types of water treatment, Rosun develops and produces various types of water disinfection chemicals. Besides, we also develop water treatment technologies including wastewater treatment bioreactors. If you require Water Treatment Chemicals, please check the detailed information of our Water Treatment Chemicals for sale displayed below. Or feel free to contact us directly! Types of Water Treatment Compound Industrial Wastewater Treatment Pre treatment solutions are needed for industrial water. Disinfectant of water can be done by industrial water treatment chemicals. Exclusive Active Oxygen Germicide and Algicide, Green and Eco-Friendly. Various biocide water treatment chemicals is available, including chlorine dioxide biocide and other oxidising/oxidizing biocide for water treatment. Domestic Sewage Treatment It is the trend of the times to choose a new Domestic Sewage Treatment with safety, efficiency, and environmental protection economy! Sewage water is disinfected by water treatment compounds so as to realize the sterilization in water treatment. Drinking Water Treatment The purpose of disinfection for drinking water is killing bacteria in water and the vast majority of pathogenic microorganisms harmful to human health, including viruses, protozoa, and so on. The sterilization of water can be done by using pre treatment solutions to complete water tank disinfectant. Swimming Pool Disinfection Swimming pool disinfectant is the necessary protective measures of swimming pool, more and more attention should be paid to the water quality and environment of swimming pool. The disinfectant of water is done by pre treatment solutions and water is usually disinfected by using water treatment compound. As one of professional china water treatment chemical manufacturers, Rosun can offer various compounds meet different usages.
Water Softeners UVDF is a trusted supplier of high-quality water treatment solutions, including top-of-the-line water softeners. Our water softeners are designed to tackle hard water problems effectively, ensuring your water is soft, clean, and better for your appliances, plumbing, and skin. Why Choose a Water Softener? Softened water offers numerous advantages, making it a valuable addition to any home focused on health and efficiency. UVDF water softeners are designed to remove mineral deposits from water that cause issues like scale, soap scum, and general water hardness. By doing so, they help extend the lifespan of appliances and reduce energy bills. Additionally, using softened water can lead to softer skin and hair, cleaner dishes, and brighter laundry colors. These benefits contribute to an improved quality of life for you and your family. How Does Water Softening Work? Water softeners utilize an ion exchange process to remove dissolved minerals, which are responsible for hard water. Ion Exchange Process: The water softener contains resin beads filled with sodium ions. As water flows into the tank, dissolved minerals, such as calcium and magnesium, attach to the resin beads. Mineral Removal: The sodium ions are released into the water, replacing the hard minerals. The captured minerals remain attached to the resin beads, effectively removing them from the water. Resulting Soft Water: The softened water, now free from hard minerals, exits the tank ready for use. By using a UVDF water softener, you ensure that your homes water is free from the adverse effects of hard water, leading to better performance of appliances and an overall enhanced living experience.
Iodine 42ppm Calcium 0.09% Mg. 0.08% Impurities 0.04% Purity 99.4% Sulphate 0.17%
Transport Membrane Condenser Aqua - Water and Energy Sustainability product, saves your process water 40%-80%, give efficiency boost on your boiler, spray dryer and the likes 3%-15%, reduces carbon, and water vapor emission 50%-70%. This is the module of the future, recently award as the "Best Sustainability product of 2023" by Process Expo in Chicago, US.
Brucite is the mineral form of magnesium hydroxide, with the chemical formula Mg(OH)2. It is a common alteration product of periclase in marble; a low-temperature hydrothermal vein mineral in metamorphosed limestones andchlorite schists; and formed during serpentinization of dunites. Brucite is often found in association. magnesium ore - natural brucite pirce Brucite is also called as magnesium hydroxide. The molecular formula is Mg(OH)2, with theoretical values of MgO 69%,H2O 31%. It usually shows white, grey and light greenish yellow in color. Whiteness is 80-85, Moh hardness is 2.5, and the relative density is 2.3-2.6. Brucite is a fibrous magnesium hydroxide rarely at home and abroad. It is white color and easy to split. Nowadays brucite becomes ideal substitute for asbestos due to excellent performance and competitive price.
Product including polyferric sulfate, polyaluminum chloride, ferrous sulphate, aluminium sulfate, polyacrylamide, and other sewage treatment agents, .
Calcium hypochlorite 70%, pac30%, cashew nut shell liquid (cnsl), cashew nut shell extraction, cardanol, used cooking oil, biomass, cnse pellet.
