Properties: ATMP has an excellent chelation, a low threshold inhibition and a lattice distortion ability. It functions to prevent scale formation, calcium carbonate in particular, in water system. It has a good chemical stability and is hard to be hydrolyzed in water system. At high concentration. It has a good corrosion inhibition. It is used in industrial circulating cool water system of thermal power plant and oil refinery plant. Atmp can decrease scale formation and inhibit corrosion of metal equipment and pipeline. It can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of atmp is crystal powder, soluble in water, easily dissolvable, suitable for usage in winter and freezing districts. Due to its high purity. It can be used in woven & dyeing industries and as metal surface treatment agent. Package and storage: Liquid: normally in 200l plastic drum, IBC (1000l) can also be used as required Solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by customers. Storage for 10 months in a cool and dry place.
Calcium Lignosulphonate is a kind of natural anionic surface active agent processed with sulfurous acid pulping waste through advanced production technology. It can work well with other chemicals and produce early strength agent, slow setting agent, antifreeze and pumping agent . It is widely used in various concrete projects such preformed concrete, reinforced concrete and prestressed concrete, especially applicable for commercial concrete, anti-freezing concrete, waterproof concrete, bulk concrete, pumping concrete, with high economic benefit. Major technical indicators : Index name Index Appearance yellow brown or brown powder lignosulphonate 60% Dry matter content 93% PH(1% Aq. solution) 5-7 Moisture 7% Water insoluble matter 2% Inorganic salt 5% Reducing Sugars content 3% . 25kg in PP woven bag lined with plastic film.
Product Description : Sodium lignosulphonate (lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage, low air content, water reducing rate is high, adapt to most kind of cement. Can confected as concrete early-age strength enhancer, concrete retarder, antifreeze, pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. Main performance: 1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. 3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4. In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials. 5. In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. 1, Packing: 25kg in PP woven bag lined with plastic film. 2, Storage: Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 3, Transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.
Appearance yellow brown or brown powder lignosulphonate : 55% Dry matter : 93% PH(1% Aq. solution) 8-9 Moisture : 7% Water insoluble matter : 1% Total Reducing Matter : 4% Calcium Magnesium General Quantity : 0. 5%. 25kg in PP woven bag lined with plastic film.
Chrome-free lignosulfonate is a drilling mud thinner produced by multi chemical reactions followed by drying of natural high molecular weight compound, organic material and harmless metal ions. The product contains no Chromium heavy metal and is ideal for use in drilling at densely populated area and offshore. Index name Index Appearance yellow brown or brown powder Moisture 8% Dry matter 93% PH(2% Aq. solution) >7 Total CaSO4 % 2.0 - 4.0 Total Fe % 4% Insoluble alkaline material % 2.5%. It is packed in 25 kg net weight moisture proof multi-wall paper bags, with pe film inside. Other size packing is also available on request.
Quick Details : Classification: Chemical Auxiliary Agent CAS No.: 9003-05-8 Other Names: PAM MF: C5H5NO)n EINECS No.: 45-784-56 Purity: 98% Place of Origin: Henan China (Mainland) Type: wate treatment Usage: leather auxiliary agents, paper chemical. Brand Name:CHENGHUI Model Number: 01 Color: white powder/granule Packaging & Delivery: Packaging Detail: 25Kg Delivery Detail: 10 days Specifications : APAM-Anionic Polyacrylamide, Water Treatment Chemical. It is white powder, has good water solubility. APAM-Anionic Polyacrylamide, Water Treatment Chemical Features: 1) Appearance: white granule 2) Molecular weight: 5 - 22 million minimum 3) Granule: 20 - 100 mesh 4) Solid content: 95% 5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40% 6)Dissolving time: 2 hours maximum (10C) 7) Insoluble: 0.5% maximum 8) Monomer free: 0.05% maximum Use: (1) Industrial waste water treatment: For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc.. (2) Drinking water treatment: When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter. (3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory. (4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery. (5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making. 25kg/bag.
Anti scalent for boiler, cooling tower, revers osmosis plant and hvac systems. 30kg plastic jarry cane.
We are the manufacturer and exporter of water treatment chemical covering organophosphates, carboxylic copolymer bactericide and algaecide, corrosion inhibitor, four series which are mainly used in industrial water treatment of cooling towers, power plants, boilers, ro systems, oil fields and in textiles. The product we manufacture: Atmp, hedp, edtmps, dtpmpa, pbtca, sadp, madmp, gdmp, Bkc/ddbac, cmit/mit, Atmp.Na4, atmp.Na5, dtpmp.Na7, edpmp.Na5, hedp.Na4, hedp.Na2, Paa, paas, hpma, ma/aa, aa/amps, ppca, pasp, Bta.Na, mbt.Na, tta.Na. Liquid: 200l plastic drum, ibc(1000l), customers requirement. Solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients.
Advantages 1. Protect water systems in hotels, public buildings, private households and industry against scale formation and corrosion. 2. Prevent so-called ¡brown¡or ¡red¡water and clogged pipes 3. Save expensive repairs or even replacement of water pipes,boilers, heaters, cooling systems etc. 4. Help to save energy 5. Extend the life of your water installation. Size:3*6mm & 7*9mm Apperance: Transperent crystals Packing: 20KG/Box Payment Term: T/T.
Phosphonate antiscalant and corrosion inhibitor such as atmp, hedp, edtmps, dtpmpa, pbtca and dispersant: hpma, ma-aa, aa/amps, paa, paas, pesa, pasp.
Properties: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95 min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH value (1% solution) 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density (20¡æ) g/cm3 1.33 min Colour APHA (Hazen) 40 max Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Name: Trichloroisocyanuric acid Molecular formula: C3O3N3Cl3 Structural formula: UN No.: 2468 CAS No.: 87-90-1 Form: white powder, granules or tablets Moleclar weight: 232.41 Available chlorine: 90% Water content: 0.5% Solubility: 1.2g/100g water PH value of 1% solution:2.7-3.3. 25kg/plastic drum,or as per requirement. 21MT/20'FCL.
The product has the features including wide applicable range of PH value, large granule, and quick speed in sedimentation. It is widely applied for treating the domestic drinking water, domestic sewage and industrial waste water. 25KG/PP woven bag with a PE layer inside, 18MT/20'FCL.
1. Cationic Polyacrylamide :XDLY-8110 2. ISO9001 & 14001 3. High quality and best price 4. MSDS & SGS.COA 5. France SNF quality. Packaging:the solid products are packed in kraft paper bag Delivery lead time:10days Minimum order: 2 metric ton Supply ability:12000 metric ton/metric tons per year.
Product introduction 1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis. 2.It doesn't need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water. 3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water. Product Details: AL2O3 content/% : 30 Basicity% : 40-90 Density(20¡ãC)/(g/cm3) : 1.12 Water insoluble content /% : 1.0 PH(1% aqueous solution) : 3.5-5.0 arsenic(As) content% : 0.0002 Ammoniacal nitrogen(N)content % : 0.01 lead(Pb)content% : 0.001 cadmium(Cd)content% : 0.0002 mercury(Hg)content % : 0.00001 hexavalent chrome(Cr6+)% : 0.0005 Application 1.Tap water,life sewage 2.Various industrial waste water. 3.Tannage and cloth cockling-prevent 4.Cement Solidifying, and moulding 5.Refining of pharmaceuticals, glycerine and sugar 6. Catalyzer carrier 7. Paper-making glue. Packaging and storage : 1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg. 2, Stored in a cool and dry place to prevent the sun and rain. Cautions: 1.This product mustn't be stored together with other chemical reagents. 2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp. 25kg/bag.
Polyaluminium Chloride Description PAC is a kind of inorganic macromolecule flocculant. Through the hydroxyl ion bridging function and the polyvalent anion polymeric function, it produces large molecular and high electricity inorganic macromolecule. It adapts a wide PH range of 5.0~9.0, and the best is between 6.5~7.6. Specification: Aluminum Oxide(AL2O3)% : 29.0 Basicity(B)% : 65-90 water-insoluble substance% : 0.3 PH(1% water solution ) : 3.5-5.0 (SO42-)% : 9.8 Anmoniacal(N)% : 0.06 Arsenic(As)% : 0.0005 Manganese(Mn)% : 0.010 Six prices chromium(Cr6+)% : 0.0015 Mercury (Hg)% : 0.00002 Lead (Pb)% : 0.003 Cadmium (Cd)% : 0.0006 Application 1.Purification of river water, lake water and underground water,industry water and industry recycling water. 2.Reclaiming coal from coal-washing waste water and kaolin in ceramic industry 3.Purification of the waste water in printing and dyeing industry, leather industry, brewage industry, meat-processing industry, coal-washing, metallurgy industry, mine, pharmacy, paper-making, and purification of the waste water containing fluorine, oil and heavy metals 4.Tannage and cloth cockling-prevent,Catalyzer carrier. 5.Cement Solidifying, and moulding,Refining of pharmaceuticals, glycerine and sugar,Paper-making glue. Package Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg. Cautions This product ban and toxic substances, transportation and storage of mixed, when storing note waterproof, moistureproof, prevent packing damage. When using, should first water according to test, and select a water purification effect, small data of optimal point. The solution should match with with use, storage time, usually less than 24 hours. The drinking water shall be selected according to the actual situation of the dosage. Use a solid, add water to dissolve into first with 10-15% solution, and then add water dilute to the necessary concentration, add water to dissolve in first slowly release, and ongoing mixing. Using the liquid products, may directly to the necessary add water dilute concentrations. 25kg/bag.
Product introduction Polyaluminium Chloride is a kind of high-efficient water treatment chemicals.It can be used for treating industrial waste water . The product is high-efficient,cheap and nontoxic high molecular compound.The solid is yellow powder.It is easily soluble in water.In the hydrolytic process,it is accompanied with the chemical processes such as electrochemistry, coagulation, absorption and precipitation.The product has the features including wide applicablerange of PH value,large granule and quick speed in sedimentation. It is widely applied for treating the drinkingwater, industrial waste water and daily sewage etc. ITEM : Standard AL2O3 (m/m):% : 28 Water- insoluble(m/m):% : 1.0 Basicity% : 40~90 Ammonium Nitrogen:% : 0.15 As(m/m):% : 0.003 Pb(m/m):% : 0.015 Cd(m/m):% : 0.003 Hg(m/m):% : 0.0001 Cr6+ (m/m):% : 0.005 Ph Value : 3.5~5.0 Application (1) Purification of river water, lake water and underground water (2) Purification of industry water and industry recycling water (3) Reclaiming coal from coal-washing waste water and kaolin in ceramic industry (4)Purification of the waste water in printing and dyeing industry,leatherindustry,brewageindustry,meat-processing industry, coal-washing,metallurgy industry, mine, pharmacy,paper-making, and purification of the wastewater containing fluorine, oil and heavy metals (5) Cement Solidifying, and moulding Package and storage The solid is packed in two-layer bag with the interior in plastic and the exterior in the woven.The weight of each bag is 25kg. With certain causticity ,the product shall be sealed and stored in the dry and ventilated place to prevent it from rain,high temperature and strong sunlight .The shelf life of product is 12 months. Cautions This product mustn't be stored together with other chemical reagents. Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp. 25kg/bag.
Product introduction Poly Aluminium Chloride water purification agent is a novel kind of efficient water purification agent produced employing advanced production technique and selected raw materials (industrial first-level aluminum hydroxide, high purity hydrochloric acid and so on). The optimum flocculation species of this product is AlO4Al12(OH)24(H2O)127+ (short as Al13) and their aggregates. They are highly-charged aggregates comprised of nanometer keggin structure (molecular size of 2.5nm, aggregate size of 50-200nm) and have excellent water purification efficiency. The solid product, the iron content of which is lower than 100ppm, is milky white . PAC-H is the product with the highest purity in domestic and overseas markets. Product detials Product Name : Polyaluminum Chloride CAS No.: : 1327-41-9 Appearance : : Yellow or Light Yellow powder Main Content : 30 %min Alkalinity: : 40--90% amino nitrogen : 0.09%max Chromium: : 15ppm max Manganese: : 0.045%max As % : 5ppm max Pb % : 30ppm max Hg % : 0.2ppm max Cd: : 6ppm max Packing : 25kg PP bag with PE film inside PH VALUE (1% CONTENT IN WATER) : 3.5---5.0. The best application 1.Drinking water treatment 2.Sizing agent and affiliated agent for paper-making 3.Treatment of high-purity water 4.Treatment of reinjection water for oil wells 5.Cosmetics, catalysts 6.Molding, medicine. Packaging and storage 1, plastic, plastic woven layer for each bag is 25kg weight. 2 and store in a cool, dry place, prevent weathered, don't and inflammable and explosive and radioactive substances or chemicals piled up. 3: does not affect the use effect of moisture. But try not to let them damp, damp easily dissolved. Cautions 1. It cannot be stored together with other chemical reagents. 2. The storage period of solid PAC should be 2 years while being stored in ventilated and dry place. The performance will not change even through being damped. 25kg/bag.
Specifications: Dosage form: white powder, granular, or flake Effective CL: 90% min pH value( 1% solution): 2.7-3.3 Moisture: 0.5% max Water insoluble matter: 0.2% max Granular: 8-30 mesh, 20-60 mesh (or decided by customer) Tablet: 5g, 10g, 20g, 50g, 100g, 200g.
Specification: The available chlorine content: Divided into two kinds, 56\60% 1%aqueous: pH= 6~7 Water-insoluble: 0.1%max Granular specifications: 8 ~ 30 mesh or 20 ~ 60 mesh (Also according to the requirements of users) Tablets: 1g ~ 150g/piece (Also according to the requirements of users).
