product appearance-white crystalline powder chemical formula-C6H8O7 molecular weight-192.13 CASnumber-77-92-9 food additives Direct factory delivery wholesale price
Ferric Chloride Powder/Anhydrous can be used in water treatment.
Chlorine tablets, water treatment chemicals including tcca 90 granular, calcium hypochlorite granular or tablet.Shipping, manufacturer & exporter
Water & waste water treatment plant.Engineering consultancy i.e. civil engineering, water treatment & distribution pipe line, effluent treatment plant, sewage treatment
Water and waste water treatment system.
This product poly aluminum chloride (PAC) is a kind of inorganic, a new water purification material, inorganic polymer coagulant, referred to as poly aluminum, has solid and liquid two forms. Poly aluminum chloride has the properties of adsorption, condensation and precipitation. Among them, white poly aluminum chloride is a spray polyaluminum chloride with high purity and high performance. White high purity poly aluminium chloride solid is white to light yellow powder or granule. It conforms to Chinese GB15892-2020, and the technical indicators are as follows: Poly aluminium chloride Item Technical index AL2O3 % â?¥29.0 Basicity % 45.0-90.0 pH value (10g / L solution) 3.5-5.0 Water insoluble matter % â?¤0.1 Fe % â?¤0.2 As % â?¤0.0001 Pb % â?¤0.0005 Cd % â?¤0.0001 Hg % â?¤0.00001 Cr % â?¤0.0005
Water softener salt tablet, mineral water.
Chemical Name: Benzalkonium chloride CAS No.: 63449-41-2/8001-54-5 Molecular Fomula: C17H30ClN Molecular weight: 283.88 Appearance: Colorless to yellowish liquid Assay: 50% 80%
PAC (Poly aluminium Chloride) referred to as PAC. Usually referred to as Basic or a coagulant such as aluminum chloride, which is between ALCL3 and AL (OH) 3 between a water-soluble inorganic polymers, chemistry the general formula: [Al2(OH)n Cl6-n]m where m on behalf of polymerization degree, n said that the neutral level of PAC products. The color yellow or light yellow, dark brown, dark gray resin-like solid. The product has a strong bridge adsorption performance, during the hydrolysis process, accompanied by cohesion occurs, adsorption and precipitation and other physical chemical processes
Poly Aluminum Chloride used for water treatment. PAC Flocculant
HEDP 1-Hydroxyethylidene-1,1-diphosphonic acid (Cas No.:2809-21-4 ) Cas No.: 2809-21-4 Molecular formula : C2H8O7P2 Molecular weight: 206.03 Package: HEDP liquid: 200L plastic drum,IBC(1000L),customers requirement. HEDP solid: 25kg/bag,customers requirement. Application: HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metals surfaces. HEDPshows excellent scale and corrosion inhibition effects under temperature 250 HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid
PAPEMP is a new kind of water treatment agent. PAPEMP has high chelation and dispersion effects, high value of calcium tolerance, and good scale inhibition effects. Molecular weight: about 600 Properties: PAPEMP can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system in situations of high hardness, high alkali and high pH value. PAPEMP has excellent scale inhibition ability to calcium carbonate, calcium sulfate and calcium phosphate. PAPEMP can efficiently inhibit the formation of silica scale, stabilize metal ions such as Zn, Mn and Fe. Vcycletech PAPEMP can be used as scale inhibitor for reverse osmosis system and multistep flash vaporization system in which high salt concentration, high turbidity and high temperature are usually encountered (such as high temperature and high turbidity in coal vaporization system), accessory agent for woven & dyeing (for example, yellow turnback inhibition agent), as alternatives of EDTA, DTPA and NTA . Specification: items index Appearance Amber transparent liquid Active component % 36.0 min Phosphorous acid (as PO43-)% 1.0 max Density (20) g/cm3 1.15 min pH (1%solution) 2.0 max Feas Fe3+ppm 35 max Usage: The dosage of PAPEMP is 5-100ppm, the dosage different from other agents is the more the better. It can be used with poly carboxylic acid,high dosage, high concentrated multiple operation can be realized Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Bronopol for water treatment
1.Chemical name: Poly Acrylamide (PAM) 2. CAS: 9003-05-8 3.Performance:White crystal 4. Application: polyacrylamide (PAM) is one of the most widely used water-soluble polymers. It is widely used in oil exploitation, papermaking, water treatment, textile, medicine, agriculture and other industries. There are three forms of polyacrylamide products: aqueous colloid, powder and emulsion. According to the characteristics of ions, it can be divided into four types: non-ionic, anionic, cationic and amphoteric. 5. Methods of use: before use, prepare the product with deionized water to a solution of 2-5 thousandth of molecular weight according to the proportion of use. In the process of configuration, the agitation should not be too intense, so as to prevent the polymer chain of the product from breaking due to the shear action and affect the use effect of the product. The prepared product solution should be prepared and used first, and the storage time should not exceed 24 hours. The simulated screening in the laboratory can determine the approximate dosage of the product, but it is necessary to adjust the super final dosage according to the site conditions. V. packaging and storage: kraft paper bag for external use, with plastic film package inside, net weight of each bag is 25kg, which can also be modified according to the user's requirements. The product is hygroscopic and should be stored in a cool and dry place with temperature lower than 35 ºC. Solid products shall not be scattered on the ground to prevent the ground from sliding after the product absorbs moisture. 6. Safety protection: pay attention to labor protection during operation, and avoid contact with skin, eyes, etc. 7. Specifications: ITEM Index Type 1 Type 2 Solid content (solid),w/% â?¥ 90.0 88.0 Acrylamide monomer content w/% â?¤ 0.025 0.05 Dissolution time (anionic) /min â?¤ 60 90 Dissolution time (non-ionic) /min â?¤ 90 120 Screen residue (1.00mm screen),w/% â?¤ 5 10 Screen residue (180 μ m screen),w/%â?¥ 85 80 Insoluble (anionic),w/% â?¤ 0.3 2.0 Insoluble (non-ionic),w/% â?¤ 0.3 2.5
It is a disinfecting efferverscent tablet.Kill Candida albicans, Staphylococus aureas. Sterilization of the surface of objects. Way To Use: Take 1 tablet of TCCA, put it in 1000ml of water (Effect on 200square meters of use area). Spray and disinfect after dissolving.
Product Description : High-Tech development area, Zhengzhou,China Price of product ( USD price or FOB price) : USD 1.9-2.9 per tube Product origin : High-Tech development area, Zhengzhou,China Key Specifications/Special Features : Way To Use: Take 1 tablet of TCCA, put it in 1000ml of water (Effect on 200m2 of use area). Spray and disinfect after dissolving. Certification: CE Port of Loading: Payment Term: China Delivery Time Shipment: Minimum Order Size and Packaging details : Min.order quantity:10000 tubes . Packing:100 tubes/cartons. Carton size: 37 * 35.5 * 17 cm; Gross weight: 11 kg; Daily Output: 50000 tubes
Bonnafide Chemicals is a trusted name when it comes to world class Water Treatment Chemicals. The premium quality Water Treatment Chemicals supplied by us have been widely used for processing and management of problems associated with the treatment of industrial waste water. The high effectiveness and pure quality of the water treatment chemicals offered by us have placed us among the eminent Water Treatment Chemicals trader and suppliers Kanpur, Uttar Pradesh.
Carboxylate-Sulfonate-Nonion Tri-polymer XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. XT-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. Vcycletech XT-3100 is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. XT-3100 is a all organic dispersant and scale inhibitor,XT - 3100 has good inhibition for dry iron oxide and hydrated ferric oxide.As a excellent anti-scaling agent, XT - 3100 can also be used as a stabilizer phosphate or phosphonic acid salt corrosion inhibitors  (Similiar to RohmHaas ACUMER 3100) Specification: items index Appearance Light amber liquid Solid content % 43.0-44.0 Density (20)g/cm3 1.15min pH(1% water solution) 2.1-2.8 Usage: Carboxylate-Sulfonate-Nonion Tri-polymer can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be determined by experiment. Package and Storage: 200L plastic drum,IBC(1000L),customers requirement. Storage for ten months in shady room and dry place. Safety Protection: Acidity, avoid contact with eye and skin, once contacted, flush with water.
XT-5000 is a superior scale inhibitor and dispersant. It has good inhibition for silica and magnesium silicate when used in recirculation cooling circuits and boilers. It is a superior phosphate scale inhibitor for dry or hydrated ferric oxide. Acting as rust inhibitor, XT-5000 can also be used in systems like industrial RO, pools and fountains etc Specification: Items Index Appearance Amber liquid Solid content % 44.5-45.5 Density (20)g/cm3 1.15-1.25 pH(1% water solution) 2.5 4.0 We can supply high quality and cheap carboxylate-sulfonate copolymer. When used alone, the dosage of 15-30mg/L. Vcycletech Carboxylate-Sulfonate Copolymer Usage: When used alone, the dosage of 15-30mg/L. When used as dispersant in other fields the dosage should be determined by experiment. Package and Storage: Normally in 25kg or 250kg net plastic drum. Storage for 10 months in room shady and dry place. Safety: Weak acidity, avoid contact with eye and skin. Once contacted, flush with water.
Our company is committed to providing high quality and reliable chemicals and additives for water treatment, petroleum exploitation, textile printing and dyeing, paper making/printing, daily chemical industry, etc. - Poly Aluminum Chloride,PAC CAS:1327-41-9 - Acrylic Acid Polymer,PAAS CAS:9003-04-7 - Acrylic Acid-2-AcrylaMido-2-Methylpropane Sulfonic Acid Copolymer ,AA/AMPS,CAS:40623-75-4 [Acrylic Acid/AMPS,CAS:40623-75-4] - Xanthan Gum,CAS:11138-66-2
