Itemno. Bz142-1 Supply voltage ac24v/240v, 50/60hz Dimensions 48f-48f-40mm Time range 0f+99, 999.99 hours Installation mode inbuilt Net weight 50g
Dry type vane wheel water meter Working condition: Water temperature: 30 for cold potable water meter 90 for hot water meter Water pressure: 1mpa
Water meter.
Water meters.
LXLG-80-400 Detachable Horizontal Spiral Wing Pulse Water Meter with Flange Connection #watermeter #smartwatermeter #smartmeter #intelligentwatermeter #digitalwatermeter #remotewatermeter
Online PH meter is accurate meter for measuring PH value of solution. measuring range 0-14 PH Accuracy ±0.05 Communication 4-20mA /RS485 Protection:IP54 working condition:0~60 Application sewage fish farm aquaculture etc. Service: OEM, ODM
Online PH meter is accurate meter for measuring PH value of solution. measuring range 0-14 PH Accuracy ±0.05 Communicatio 4-20mA /RS485 Protection:IP54 working condition:0~60 Application sewage fish farm aquaculture etc. Service: OEM, ODM
Multi-jet dry-dial meter for cold water Nominal flow rate Qn 1.5 to 15 m3/h/ Q3 2.5 to 25 m3/h EEC approval metrological class B·H MID-type examination certificate R160 Good readability even at extreme operational conditions Hermatically sealed counter Antimagnetic shield (optional) ELSTER conText inscription system
FILL-RITE 901CL Mechanical Flow Meter FILL-RITE 901CL Mechanical Flow Meter Features Flow ports that can be positioned vertically or horizontally Maximum pressure of 50 psi (3.5 bar) Aluminum housing with Viton and Buna seals UL/cUL, CE listed ±2% accuracy 1' inlet and outlet
Multi-jet dry-dial meter for cold water Nominal flow rate Qn 1.5 to 15 m3/h/ Q3 2.5 to 25 m3/h EEC approval metrological class BH MID-type examination certificate R160 Good readability even at extreme operational conditions Hermatically sealed counter Antimagnetic shield (optional) ELSTER conText inscription system
Electromagnetic Flowmeter model No FMF 2500 Manufacturing Unit in Coimbatore
Features It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. Working Conditions Cold Water Temperature: 50C Water Pressure: 1MPa P < 0.03 MPa (APS Marines & Logistics)
Features Dry register and register with 5 or 8 numbered roller. Brass body can be painted or nickel coated. High accuracy. Measuring unit is m The meters conform to ISO4064 Standard Class B. Working Conditions Water temperature 30 C; hot water meter 90 C Water pressure 1MPa (PN:1.6MPa/16bar) P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% (Hot water meter: �±3%) (APS Marines & Logistics)
Description Electromagnetic Flow Meters follow the Faraday Law of Electromagnetic Induction. They are used to accurately measure the flow rate of liquids which are electrically conducting. Nominal Size: 25-200 mm Electrode Material: SS 316L Lining Material: FEP Flange Material: Carbon Steel Flow Sensor Housing: SS 316 Flow Sensor Protection Class: IP 65 Power Supply: 85VAC 240VAC Signal Output: 4~20mA Pulse Output: Adjustable from 0.001 to 1000 L Pulse Communication: RS 485 with Galvanic Isolation, MODBUS Cable Length: 5M Features No moving parts. virtually no pressure lost. Corrosion protection, abrasion resistant. High accuracy, stable performance. High level of anti-vibration and anti-jamming, wide measuring dimensions. Multi output interface: 4~20mA, Pulse, Alarm outputs, RS â?? 485 (Modbus) communication. Working Conditions Pressure Rating: PN16 Temperature Rating:
Description Water Meter for Hot & Cold water is manufactured using advanced technology, in which the register device is combinated pointers and rolling counters for convenience, clarity & correctness as well as nice appearance. The register system is designed by means of magnetic drive, which is hermetically sealed and completely separates register system from water. These water meters have high accuracy of measurement and steady error curve of flow rate. The performance is more advanced than existing ISO â?? Standard Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% (APS Marines & Logistics)
Features It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available) The recorder is sealed up so that readings are over clear. Measuring devices are general purpose and can reduce alternate parts. Its parts are connected magnetically and work numbly and reliably because of slight obstruction. The pressure loss is small. It is durable. Working Conditions Hot Water Temperature: 90 C Water Pressure: 1MPa P < 0.03MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Hot: Exclusive: + 3% Application Dismountable spiral hot water is for recording discharge, flowing through its pipe. It can not record the amount of polluted water end corrosive liquid (APS Marines & Logistics)
Description Type LXSG-15E-50E water meter for cold water is manufactured by using advanced technology, in which, the register device is combinated pointers and rolling counters which is convenient, clear and correct for reading as well as nice appearance. The register system is designed by means of magnetic-drive, which is hermitically-sealed and completely separates the register system & water. It however can not be influence even if in pure water condition as well as corrosion of indicating dial. These water meter have high accuracy of measurement, steady error curve of flow rate. The performance is more advanced than existing ISO standard. Working Conditions Water Temperature < 50 C Water Pressure < 1MPa P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% Application This water meter is used for measurement of total quantity of water passing through the pipeline. It is available for water flowing in a single direction. (APS Marines & Logistics)
Description Product Standard: ISO 4064 Class B End Details: Flanges as per DIN:2533 RF (PN16) Drilled Features It is dismountable and it can be pulled out easily for repair. The recorder is sealed so that readings are clear. The pressure loss is small and it has big flow capacity. It can be installed vertically or horizontally. Working Conditions Pressure Rating: PN 1.6 (16 Bar) Hyd. Maximum Temperature: 45 C Working Pressure: 1.0 MPa Hyd. Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: +5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: +2% (APS Marines & Logistics)
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customers house, when the meter is kept away from customers reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customerâ??s house, when the meter is kept away from customerâ??s reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.
