Find Verified Water Filters Water Treatment Plants Suppliers, Manufacturers and Wholesalers

Microbubbles Jet, full eliminate plaque bacteria for healthier gums with ozone water-enriched microbubbles
Ozone ultrafine bubble water
Ozone water technology with antibacterial, totally eliminate plaque and debris from deep between teeth and below the gumline, moreover keep residue away there is no chance of residue of plaque, debris into blood vessel wall where regular water flosser canâ??t reach.
Ozone water cleans tube wall, eliminate germinate bacterium from tube wall to keep flossing clean and fresh
Ozone water keeping jet tip clean, no need replacement jet tips 3 month or 6 month /time
Ozone water in place of mouth wash

4 intensity modes for just the right cleaning pressure â?? intense, medium,soft or sensitive
4 flossing streams â?? Multi-Jet for all-around clean, focused for targeted cleaning, and Rotational for gum massage
Perfect flossing solution for patients with braces and implants. Remove plaque and food that may be trapped between wires and brackets.
Cordless water flosser with long lasting rechargeable battery and charging station for a portable deep clean

Leaves your mouth feeling incredibly fresh and clean

RT WELL TREAT is arobust , advance and efficient electrochemical based whole home / point of entry (poe) disinfiction system which can be easily fitted at delivery of the well pumps or tube well pump discharge
Point of entry disinfection system are relied on by families throughout world who wish to ensure thet they have round the clock access to the cleanest and healthiest water possible.
A Pole disinfection system is one that is designed to connect to your home's main bore well pumps / well pumps or water pumps to treat the whole water at its pumbs.

Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use.
The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc.
Product Categories
spherical aerator head
Bottom diameter: 150mm-200mm
Flat aerator head
Diameter: 100mm-300mm
Tube aerator head
Diameter: 14mm-80mm
Length: 10mm-1000mm
Product parameters
Product name: pure titanium aerator head for sewage treatment
Material: pure titanium
Aeration accuracy: 0.22-100 microns
Porosity: 30%-40%
Features
1. The aeration aperture is fine and uniform, and the efficiency is high;
2. The air bubbles diffuse evenly, and there will be no clogging of pores;
3. High temperature resistance and corrosion resistance;
4. Fast oxygenation speed;
5. Washable and reusable;
6. Customizable.
Working principle
Aeration is mainly used in sewage biological treatment
In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate.
Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.

We are dealing in complete water treatment Equipment s leading brands, i.e. RO Systems filtration systems, membranes, antiscalant chemicals, pumps, valves and fitting items.

LG 8040 400 R (RO membranes for Brackish Water)

Warranty:
12 months
Customized support:
NONE
Product name:
COD quick test kit
Reagent colorimetric tube:
50 tubes
Color Card:
1 item
User's Guide:
1 item
Test Range(low):
0-10-100-300-500-800 mg/L
Color comparison time:
4 minutes
Shelf life:
12 months

The smallest and most compact lab water system from tap to ultrapure water, integrating pretreatment, RO, DI, UV, UF and terminal filter into one.
Whole case with one time injection molding process, material: polypropylene, avoid rusting and keep clean, to meet GLP standard.
Top cap of pretreatment in the case can be rapidly opened to replace the cartridges without opening the case.
System automatically works, with electronic pressure sensor and microcomputer controlling.
Automatic stop without water, automatic stop when water tank full, automatically cutting off water when pump stopping, guaranteeing 24 hours work.
Auto self-flushing of RO membrane function, extend RO membranes life.
On-line resistivity monitor, with apheliotropic LCD display, to detect the quality of deionized or ultrapure water.
Attached portable TDS (total dissolved solid)/conductivity test pen, with dry cell design, to detect the quality of feed water and RO water.
External water tanks is optional to meet different need and assure ample water-supply.
Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure waters quality.
Long life pretreatment (including PP fiber, and active carbon cartridge), effectively protect RO membrane.
RO module with DOW membrane, ensure long life, stable operation and high desalinization rate.
4 independent ultrapure cartridges with DOW top polishing resin, ensure ultrapure waters quality up to 18.2 M.cm, with the lowest TOC level and running cost.
Double wavelength (185&254nm) ultraviolet lamp module, restrain bacterias increase and reduce TOC.
MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.
(0.45+0.1)um double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.
Commodity Basic Eliminating endotoxin Low TOC Synthesizing
Model 15 l/h Smart-S15 Smart-S15UF Smart-S15UV Smart-S15UVF
30 l/h Smart-S30 Smart-S30UF Smart-S30UV Smart-S30UVF
Feed water* Tap water: TDS200ppm)
System process** PF+AC+RO+DI+TF PF+AC+RO+DI+UF+TF PF+AC+RO+UV+DI+TF PF+AC+RO+UV+DI+UF+TF
Specifications of UP water UP
Resistivity 18.2M�©.cm@25â??
Heavy metal ion < 0.1 ppb
TOC)***

PAM Polymer Preparation Unit Description

The automatic dosing machine is widely used in the waste water treatment, it can mix the compounds continuously and effectively, so the reactive polymer solution appears. These main components of the machine: Polymer feed machine (including material hopper), Dry powder infiltration device, Tank, Level controller, Mixer, Dosage water inlet pipe, Electric control panel.
Polymer dosing device
Polymer dosing device is composed of hopper, push screw, electric heater and etc. The effective volume of the hopper can meet the dosage for a long time which is equipped with sight glasses for observing material level monitored by the dry powder level meter. The push screw driven by the high-precision reducer can satisfy the dosage. The electric heater can be installed in the discharge pipe of push screw, and it can prevent the powder from caking.
Polymer dissolving device
Polymer dissolving device is composed of pre-soaking device, tank, and 3 sets of mixers. The pre-soaking device is to infiltrate and mix the polymer powder in advance. The 3 tanks are precast mixing tank, homogeneous slaking tank and solution storage tank, in which there is a mixer correspond to guarantee the homogeneity.
Water supply device
Water supply device is composed of pipeline, manual ball valve, filter, pressure gauge, solenoid valve, stop valve, and the rotor flow meter, etc.

The unit technology uses extremely small air bubbles to lift suspended solids and oil to the top surface. The formed sludge layer is scraped into a sludge holding tank. The addition of coagulation and flocculation chemicals may be required to enhance the performance.

Removal efficiency is usually superior to gravity bases systems and often applied as polishing step (downstream of CPI)
The unit can be supplied with a gas-tight cover, coagulation & flocculation dosing and mixing equipment and air-saturation by special pumps or in separate pressure vessel.

Flotation consists of separating solids from the water phase by attaching the solids to fine air bubbles to decrease the densityof the particles which float instead of sinking. The rising solids are called the and are skimmed off the surface and further processed in the sludge train.Chemicals can be added to improve the separation: first for coagulation and then for flocculation.
The type of flotation used by Dissolved Air Flotation in which the suspension is saturated with air at high pressure. Bubbles are released to the water and will attach to the suspended solids.The bubbles from a system are much smaller than in other types of flotation systems and better adhere to the solids.This makes
one of the most efficient flotation options of wastewater treatment.

Glass fused to steel Wastewater Storage Tanks is the premium coating storage tank technology in the storage tank market . Glass-fused to-steel wastewater storage tanks combines the strength and flexibility of steel and the corrosion resistance of glass. The glass steel plates are connected by high grade bolts on erection site and as well as sealed by silicone sealant . Glass-fused-to-steel wastewater storage tank is gas and water impermeable .Glass fused to steel wastewater storage tanks are widely used for industrial wastewater treatment plant.

Center Enamel Glass fused to steel wastewater storage tanks engineering & design, product testing are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. our glass fused to steel wastewater storage tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the glass fused to steel wastewater storage tanks structure's adequate security in long-term service life.

www.ropurifierfilter.com
Quick Details
Model Number:500 L/H
Type:Pure Water Treatment System
Capacity:250 Liter per hour
Warranty:1 Year
Voltage:220V / 380V
Function:Producing Fresh Water
Filter material:Quartz Sand/Activated carbon
Optional:Softener, Sterilizer, Ozone
Material:FRP Tank,Stainless steel tank
Operating:Automation and Manual
Product Description
The industial ro (reverse osmosis) water plant is suitable for applications requiring depth filtering. More than 99% of all microorganisms, pyrogens, particulates, organics with a molecular weight greater than 300, and up to 95% of all dissolved inorganic contaminants from the feed water are removed.
Product advantages
* Over 10 years of experience in reflected in our quality
* Manufactured in the China with CE Certified Facilities
* Conservatively engineered for reliable, long term performance
* It Removes All Types Of Contaminants
* Removes The Odor Off Of The Water
* Long Lasting
* Saving money
* Very easy to maintain
Application fields
1, Printing enterprises wastewater reuse ;
2, PCB enterprise wastewater reuse ;
3, Electroplating enterprise wastewater reuse;
4, Painting enterprise wastewater reuse ;
5, Other car washing/industries wastewater reuse ;
6,Well/underground/tap/river/ municipal water.

Natural mineral water bottling factory with a blow molding machine and all the necessary permissions is for sale. It has a total territory of 6000 square metres.
Country of origin: Hungary
Brand name: TRIÃ?SZ
The mineral water bottling factory produces 1,5l water bottles with an hourly capacity of 2000 -2500 pieces.
The fountain has a continuous flow rate of 125l per minute what can be extended.
The blow molding machine itself has an hourly capacity of 3000 pieces.

Ceramsite sand filter media are hard and rough in surface,porous inside the structure,and have the advantages of high mechanical strength,large specific surface area and porosity.When used in water treatment, Ceramsite Sand filters behave a activated surface property,a great amount of pollutant entrapment,less water head loss in the filter bed,lower consumption of back-flush water,stable in chemical and gbiologic property,and long service life.Ceramsite Sand filters is a new and efficient filter material to increase the water yield,upgrade the water quality,and save chemicals and energy.

Acid RO membrane antiscalant DH150

Product features and advantages
DH150 can be used to control the fouling of membrane separation system and reduce particle clogging.
Can control the formation of calcium carbonate, calcium sulfate, barium sulfate, etc..
It can prevent the scaling of calcium carbonate when LSI reaches 3.
DH150 applies to all major reverse osmosis membranes.
No adverse effects on the environment, especially suitable for the district where has special requirements on wastewater discharge.
Typical properties
Appearance Clear light yellow liquid
Specific gravity 1.15±0.05
pH(5% water solution) 2.5±0.5
Viscosityï¼?25??ï¼? 1.79TP
Adding and controlling
DH150 should be continuously added to the last level security filter. This product should be injected into the water supply pipe by diluting water tank or packing barrel. The operation parameters of the specific dosing ratio depends on the water quality and membrane system.You can ask dosing software or technical personnel determined.
Safety
Do not touch eyes and skin.More information please see the MSDS.
Packing
Conventional packaging for 25kg plastic barrels or IBC barrels. If you have special needs, please contact your sales consultant.

Alkalinity RO membrane antiscalant DH191

Product features and advantages
DH191 is one kind of alkalinity antiscalant.
can be used to control the fouling of membrane separation system and reduce particle clogging.
Can control the formation of calcium carbonate, calcium sulfate, barium sulfate, etc..
It can prevent the scaling of calcium carbonate when LSI reaches 3.
DH191 applies to all major reverse osmosis membranes.
No adverse effects on the environment, especially suitable for the district where has special requirements on wastewater discharge.
Typical properties
Appearance Clear colorless liquid
Specific gravity 1.3-1.35
pH(5% water solution) 10-11
Odor Slight ammonia
Adding and controlling
DH191 should be continuously added to the last level security filter. This product should be injected into the water supply pipe by diluting water tank or packing barrel. The operation parameters of the specific dosing ratio depends on the water quality and membrane system.You can ask dosing software or technical personnel determined.
Safety
Do not touch eyes and skin.More information please see the MSDS.
Packing
Conventional packaging for 25kg plastic barrels or IBC barrels. If you have special needs, please contact your sales consultant.

Oasis offers integrated packaged MBBR followed by UF process based packaged and containerised Waste Water recycling system. These are available upto 500 KLD and continuous flow systems. Treated water available is of less then 5 ppm BOD and Total Nitrogen. Easily transporable, mobile and plug & play type

Oasis Water offers modular and containerised Sea Water Desalination Systems that converts Sea Water into Drinking and process water. It is available upto 500 KLD capacity and fitted into HR Containers. It is easily transportable and "Plug & Play" type. The state-of-the-art Desal systems offered by Oasis includes pre-treatment and post treatment of product water.

Fully Automated, MBBR Process based Containerised Packaged "Plug & Play" type systems, MOC : SS/MSEP, SCADA operated, Capacities ranging : 20 to 1500 KLD, Easily Transportable, Offers output water quality BOD, TSS, TN less then 10ppm, Treated water can be reused for flushing and gardening purpose

Exporter of IBR certified or Non-IBR Pressure Reducing Station System as per client specifications.

General Principle of Water Purification System
Raw Water Raw Water Pump Mechanical Filter Activated Carbon FilterPrecision FilterFirst Pass ROSecond Pass ROTOC removerEDI System or Mixed Bed
Technical Parameter of Industrial RO System
Rejection:99.8%
Organic Removing Level150MW
Bacteria Removing Level99%
Pyrogen Removing Level99%
Particle Removing Level99%
Requests on Inlet Water
SDI5
Residual Chlorine0.1mg/l
PH:5-8