Coated Zinc : 20-120g/m2 Or According To Customer's Requirements suitable with standards: TCVN 2503: 1993, SS_EN_10244_2_2009, ASTM-A641 Elongation : 10% min Tensile Strength : 350-650 Condition : New Usage : Industrial
Coated Zinc : 20-120g/m2 Or According To Customer's Requirements suitable with standards: TCVN 2503: 1993, SS_EN_10244_2_2009, ASTM-A641 Elongation : 10% min Tensile Strength : 350-650 Condition : New Usage : Industrial
Specification of Hong Ky High Speed Steel Coil Slitting line General specification: 1. Material Thickness: 0.3 mm to 3.2 mm 2. Input Coil Width: 600 mm to 1350 mm 3. Coil outer diameter: �¦ 1000 mm to �¦ 1700 mm 4. Coil inner diameter: �¦508 or �¦610mm 5.Coil weight: max. 20 tons 6.Speed: 80 m / min ~ 200 m / min 7.Total machine weight: 80 tons Advantages of Hong Ky High Speed Steel Coil Slitting Line: Thanks to the double slitting system, quick adjusting the clearance of knife blade has achieved.The design brings customer efficiency, long life operation, and safety for user. 1. Double Slitting System: - Thanks to the double slitting system, quick adjusting the clearance of knife blade has achieved. - It is efficient because a knife blade set can be done outside the line. - It has become possible to experimentally cut outside the line before real operation in order to check the accuracy. - Since all hydraulic piping and electrical wiring are buried underground, the working ground is clean and easy for operator to work. 2. Gear Box: - Hong Ky high speed steel coil slitting line has 3 gear boxes (Reducer). All gear boxes are designed and manufactured by Hong Ky, then the design became compact and efficient. 3. Scrap disposal: - It is unique design. It is automatic. - After winding the scrap, the scrap is automatically dropped on the conveyor, and the scrap is conveyed to the scrap box. 4. Latest advanced mandrel shaft of Tension Reel: - Hong Ky has adopted one of the advanced and latest Mandrel Shafts Mechanism. The mandrel shaft is designed to minimize the amount of bending when pinching the edge of the metal sheet. 5. Line Design: - Line design is a crystal of technology that the steel industry has built over several decades. - It is efficiency, long life, and strong design. - Hong Ky high speed steel coil slitting line is classified roughly into 12 main parts. 6. Product liability: - The safety measurement is taken into consideration in order to meet the product liability law. - Ground hole are fully covered to increase safety for operator. - The moving parts are covered as much as possible. 7. User-friendly design: - Hong Ky high speed steel coil slitting line is easy to handle and taken every safety measures.
Dear Potential customers, I am Quang Minh from Hoihanh galvanized wire enterprise in Vietnam. We are specializing in supply high quality galvanized wire from Vietnam Thank you and hope receive reply from you. Just need serious and real buyers, not fake or cheater
Dear Potential customers, I am Quang Minh from Hoihanh galvanized wire enterprise in Vietnam. We are specializing in supply high quality galvanized wire from Vietnam Thank you and hope receive reply from you. Just need serious and real buyers, not fake or cheater
Hot dip galvanized steel coil (gi) Grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Thickness: 0.2-2.0mm Place of origin: vietnam Brand name: nam kim steel group Model number: sgcc, sgch, sgcd1-sgcd3, dx51d Type: steel coil technique: cold rolled Surface treatment: galvanized Application: wide construction range, household appliance special use: high-strength steel plate width: 600-1250mm Length: as per customer's requirement Coil weight : 3-24 mt - coil id: 508/610mm Zinc coating: z50-z350 Surface of the galvanized steel coil: normal spangle, minimize spangle Spangle steel grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Certificate: iso9001 Payment terms: t/t or l/c Delivery time: within 25 days after received the deposit Packaging & shipping Packaging detail: standard seaworthy export package
Hot dip galvanized steel coil (gi) Grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Thickness: 0.2-2.0mm Place of origin: vietnam Brand name: nam kim steel group Model number: sgcc, sgch, sgcd1-sgcd3, dx51d Type: steel coil technique: cold rolled Surface treatment: galvanized Application: wide construction range, household appliance special use: high-strength steel plate width: 600-1250mm Length: as per customer's requirement Coil weight : 3-24 mt - coil id: 508/610mm Zinc coating: z50-z350 Surface of the galvanized steel coil: normal spangle, minimize spangle Spangle steel grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Certificate: iso9001 Payment terms: t/t or l/c Delivery time: within 25 days after received the deposit Packaging & shipping Packaging detail: standard seaworthy export package Delivery detail: according to the quantity or as per customer's request .
Hot dip galvanized steel coil (gi) Grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Thickness: 0.2-2.0mm Place of origin: vietnam Brand name: nam kim steel group Model number: sgcc, sgch, sgcd1-sgcd3, dx51d Type: steel coil technique: cold rolled Surface treatment: galvanized Application: wide construction range, household appliance special use: high-strength steel plate width: 600-1250mm Length: as per customer's requirement Coil weight : 3-24 mt - coil id: 508/610mm Zinc coating: z50-z350 Surface of the galvanized steel coil: normal spangle, minimize spangle Spangle steel grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Certificate: iso9001 Payment terms: t/t or l/c Delivery time: within 25 days after received the deposit Packaging & shipping Packaging detail: standard seaworthy export package Delivery detail: according to the quantity or as per customer's request .
Specification and structure: - standard: jis g 3321 - technology: nof (non-oxydizing furnace) - coating mass symbol: az50 ~ az200 - material thickness: 0.20 ~ 2.0 (mm) - width: 600 ~ 1250 (mm) Quality standard: Hot-dip 55% aluminium-zinc Coated steel standard - jis g 3221 Dominant characteristics: - especially produced for various usage purposes - long life of 4 times longer than other normal - effective corrosion sheets - good heat resistance The anti-finger layer is equipped: - stain-proof and oxidization resistance - keeping the surface of the products shiny for a long time - to reduce cracking, scratching coating during stamping, rolling
Specification and structure - standard: jis 3322, jis 3312 - technology: full reverse roll coating - coating thickness: 10-30/15-30 micron - material thickness: 0.25 ~ 1.2 (mm) - width: 600 ~ 1250 (mm) Namkim color - pre-painted zinc-aluminium coated steel is made by nof hot-dip zinc-aluminium alloy coated steel material on the advanced technology and production line, diversified colors, lifespan many times longer than other pre-painted zinc coated steel, weathering resistance and good heat-protective effect.
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export standard, Wooden pallet, lashing
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export standard, Wooden pallet, lashing
- Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Once again, we would like to thank for your interest and goodwill ! JIS and ASTM standard,
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export standard, Wooden pallet, lashing
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export Standard, Wooden pallet, Lashing
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export standard, Wooden pallet, lashing
Thickness: 0.2 - 3.5 MM - With: 200 -125 MM, we also have the slitting production lines - Coating mass: Z6 - Z27 - Coils ID: 508 MM - Packing: Export standard, wooden pallet, lashing - Min order quantity: 25 MT/size - Payment: L/C or T/T - Delivery time: 25 days shipment - Origin: Vietnam For more infomation, pls contact us at: Luan On (Mr.) Export Dept, Nam Kim Steel JSC, Vietnam Ad: N1 Street, Thuan An, Binh Duong, Vietnam Cel: +84 166 7272 714 (whassapp, viber) E: luanov@namkimgroup.vn Skype: onvanluan W: http://www.namkimgroup.vn/index.php?lang=en Export standard, wooden pallet, lashing
Steel bar from D 6,8 to D 32 SD 390 or CB 400 V FOB Phu My Port Vietnam Bulk Shipment
Steel bar from D 6,8 to D 32 SD 390 or CB 400 V FOB Phu My Port Vietnam Bulk Shipment
Steel bar from D 6,8 to D 32 SD 390 or CB 400 V FOB Phu My Port Vietnam Bulk Shipment
