310S Stainless steel round bar is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310S Stainless steel round bar has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 â??, and it can work continuously at 1100 â??. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts. Standard JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material 310S Specifications Round bar Diameter:0.1~500mm Hexagonal bar Size: 2mm~100mm Flat bar Thickness 0.3~200mm Width 1~2500mm Square bar Size: 1mm*1mm~800mm*800mm Length 2m, 5.8m, 6m, or as required. Surface Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term Ex-work, FOB, CFR, CIF, etc. Export to Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time Standard size is in stock,prompt delivery or as order's quantity. Package Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry
* 304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : 304L Specifications : Round bar Diameter : 0.1~500mm Hexagonal bar : Size: 2mm~100mm Flat bar : Thickness : 0.3~200mm Width : 1~2500mm Square bar : Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment
* 201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : 201 Specifications Round bar Diameter : 0.1~500mm Hexagonal bar : Size: 2mm~100mm Flat bar Thickness : 0.3~200mm Width : 1~2500mm Square bar Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment
Material * ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022) * DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) * BS(040A04,095M15,045M10,080A40,045M10,080M50) * Thickness : 0.1mm-300mm or as required * Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. * Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance + 0.1mm * Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. * Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc Specifications Round bar Diameter : 0.1~500mm Hexagonal bar Size : 2mm~100mm Flat bar Thickness : 0.3~200mm Width : 1~2500mm Square bar Size : 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment
* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : 316L Specifications : Round bar Diameter : 0.1~500mm Hexagonal bar : Size: 2mm~100mm Flat bar : Thickness : 0.3~200mm Width : 1~2500mm Square bar : Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties. * Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel. Material : API5L Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : �±0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A106Gr. B Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing * Waterproof paper, and steel strip packed. * Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts
* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. * Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A53 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A179 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A214 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
440 Stainless Steel Coil Strip Specifications: Grades Stainless Steel J1, J2, J4, 201, 202, 301, 304, 304H, 304L , 309, 309S, 310, 310S, 316, 316L, 316TI, 321, 321H, 347, 409, 410, 410S, 420, 430, 441, 904L Thickness 0.2mm - 60mm Width 3.2mm - 2000mm Length AS PER CUSTOMER'S REQUIREMENT Type of Material STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD,FULL HARD. Finish NO.1, 2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE, SATIN FINISH, NO.8, BA. Standard ASME, ASTM, AISI, EN, BS, GB, DIN, JIS, SUS, etc. manufacture Cold Rolled ,hot rolled Application Decoration,Industry,food processing and medical industry ,ships building industry etc. Certification SGS, BV, IQI, TUV, ISO, CE, etc Coil Weight 3-10 Tons Or As Your Requirements Tolerance ±1% MOQ 1 ton Supply Ability 5000 tons / month Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30%T/T Advance + 70% Balance Price Terms FOB, CFR, CIF, EXW Packing Standard sea-worthy package or as required Characteristics of 440 Stainless Steel Coil: Excellent work hardening (non-magnetic); Excellent high temperature strength; No magnetism in solid solution state; Cold rolled products have good gloss and beautiful appearance. Uses: seawater equipment, chemical, dye, paper making, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts. 440 is widely used in the chemical industry because of its excellent corrosion resistance. 440 is also a derivative steel of 18-8 austenitic stainless steel, with 2 ~ 3% Mo added. On the basis of 440, many steel grades are also derived. For example, 440Ti is derived after adding a small amount of Ti,440 is derived after adding a small amount of N, and 317L is derived by increasing the content of Ni and mo
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Product name MONEL400 Alloy Sheet Grade MONEL400 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Fe Mn P C Ni Ci Mo MONEL400 32 1 - - 0.1 63 - -Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
904L stainless steel plate (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels. Product name 904L Stainless steel sheet Grade 904L Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields. Product name HASTELLOY C-276 Stainless steel sheet Grade HASTELLOY C-276 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade C Si Mn W Co Ni Cr Mo Hastelloy C-276 0.01 0.08 1 4 2.5 57 16.0 16 Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Use of 2205 stainless steel plate: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment Product name 2205 Stainless steel plate Grade 2205 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
310S stainless steel plate is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 , and it can work continuously at 1100. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts. Product name 310S Stainless steel sheet Grade 310S Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade C N Mn P S Ni Cr Mo 310S 0.05 - - - - 20 25 - Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel known as the passive layer. This prevents any further corrosion of the surface. Increasing the amount of Chromium gives an increased resistance to corrosion. Stainless steel also contains varying amounts of Carbon, Silicon and Manganese. Other elements such as Nickel and Molybdenum may be added to impart other useful properties such as enhanced formability and increased corrosion resistance. SS sheet are widely used in elevator cabin, building facades, panels and cladding, Luxurious doors, wall decoration, advertisement nameplates, furniture, kitchen ware, sanitary ware, ceiling, corridor, hotel hall, and various stainless steel series. Product name Stainless steel sheet Grade 201, 301ï¼?304L, 309S, 316Lï¼?310Sï¼?321ï¼?410, 430ï¼?2205 , 2507 , 904L , INCOLOY Alloy ï¼? HASTELLOY MONEL etc. Thickness range 0.3mm-100mm, Width range 120mm-2500mm Length 300mm-12000mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches. Name 316L Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 316L Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel strip is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields. Name Hastelloy C-276 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material Hastelloy C-276 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
