Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete
Clean energy for our future Wood pellets is used to popular for fuel of heater and fuel for industry, supply calorie for big factories. They make from wood small hash and trash wood, they are very safely, not poison with human, creature and not pollution with environment. Special, ash of wood pellets can be used for in planting plants. Wood pellets shall be clean energy for our future. Product: wood pellets material: wood hash, trash wood diameter: 8 mm length: 5-50 mm Tested parameters total moisture max: 7 % ash content max ( dry basis): 0, 8 % sulfur ( dry basis) : < 0, 01 % nitrogen (dry basis) : 0, 48 % clo (dry basis) : 0, 05 % gross calorific value ( dry basis): 4575 kcal/ kg certificate: sgs price (fob) sell for order regularly per month: 140$/ metric ton main port: ho chi minh port package: full in bulk container 40hc or 20hc capacity: 5, 000- 10, 000 metric ton per month payment: l/c delivery time: agreement to quickest.
Mechanical & industrial construction production lines for different industries, components for thermal power plants, pulp plants, oil and gas industries, chemical plants, cement plants, fertilizer plants, animal feed mill, food processing industries we are capable to produce yearly approximately 6000 tons with many different traditional products: boiler, pressure equipment, heat exchanger, storage tank, process piping, rotate drum, conveyor, bucket elevator, overhead crane, reclaimer and stacker, heavy duty fans, air intake and bypass system for power plant, turning roll tower for pulp plant, brewery fermentation tank, bridge, steel structures.
Chemistry, industrial, mask.
Auto heater, golf heads, stainless steel hardware, valve, flange, glass clamp, sanitary clamp.
Used To Line Barns Of Chickens, Pigs, Goats, In Heating Equipment Such As Heaters, Replacing Electric Heaters, Coal,... Specification Product Name: Wood Pellets Origin: Vietnam Ability To Provide: 5000 Tons/month Heating value: 4723 KCal/Kg Diameter: 6mm or 8mm Length: 10mm â?? 50mm Humidity: 9% Max Ash (Basic Dry): 1.5% Max Broken rate: 1.5% or less Density: 1.27kg/DM3 Sulfur content: 0.05% Max Chlorine: 0.05% Max Packing: 700-800kg / Jumbo in 40ft container
HIGH QUALITY BIOFUEL WOOD PELLET, FUEL WOOD PELLETS, PINE WOOD FROM VIETNAM 1. About Biofuel Wood Pellets: Sawdust pellets or wood pellets are biofuel derived from biomass materials such as shavings, sawdust, corn stalks, waste wood, peanut shells,.... through the production line. It is pressed into small, hard wood pellets. Sawdust pellets have low humidity, low ash content and high emitted heat, which are safe for the health of users, so they are increasingly popular in markets requiring high temperatures. 2. Specifications: Product's name: WOOD PELLETS Origin: Vietnam Ability to provide: 5000 tons/month Heating value: 4723 KCal/Kg Diameter: 6mm or 8mm Length: 10mm - 50mm Humidity: 9% Max Ash (Basic Dry): 1.5% Max Broken rate: 1.5% or less Density: 1.27kg/DM3 Sulfur content: 0.05% Max Chlorine: 0.05% Max Packing: 700-800kg / Jumbo in 40ft container 3. Top Benefits from Wood Pellets: - Used to line barns of chickens, pigs, goats,...: The superior moisture absorption of sawdust wood pellets helps this material become an important biological tool in chicken, pig, and goat farms. are raised according to new technology today. - Used in heating equipment such as heaters, replacing electric heaters, coal,â?¦: Advanced sawdust pellets are proven safe and have the right temperature for use in heating devices such as fireplaces. In particular, using wood pellets for heating helps to reduce ash, smoke, save effort and ensure safety for the health of users. - Used in industrial and civil incineration equipment: High emitted heat, low ash rate, moderate cost are the advantages that make sawdust wood pellets very popular in industries and people
I. FEATURE: Oxidized starch is used in paper industry mainly in surface treatment process in order to: Improve the paper surface strength, smoothness and stiffness of the paper. Improved printing properties. Improve the ability of waterproof paper with adhesive surface quality. Improve anti-dusting of paper surface. Good compatibility with most chemicals used in surface sizing solution (Size press). II. TYPICAL PROPERTIES - Appearance : White powder - Viscosity (mPa.s) :30-50 Brookfield Viscometer 15.0% dry substances at 50 C, 60rpm - pH : 5.0 - 7.0 (15% dry substance (cooked paste)) - Moisture (%) : 13.0 Max - Sieve analysis (%) : 1.50 Max (Mechanical sieving on 250 micron) - Shelf life : 24 months Note: The above characteristics are measured at certain condition and it could vary in the different conditions measurement. It is only for reference. These properties can be changed as required by the manufacturer's improvements without prior notice. III. APPLICATION FOR SIZEPRESS: 1. Batch cooking: Dissolve dry starch in cold water with a concentration of 15 - 20 % in the cooking tank equipped with heater and stirrer. Heat and stir the powder suspension continuously at room temperature of 90-950C for about 20 minutes to obtain a uniform liquid starch. 2. Spray continuously cooking: Dissolve dry starch in cold water with a concentration of 6 - 10%. Pump the starch suspension through the boiler tube and is heated directly by steam pressure of 2-4 bar Maintained the temperature in the cooking tank between 90-950C by adjusting the pressure of steam line. It should not be too high temperature in the cooking tank to avoid excessive starch hydrolysis. Cooking spray continuously will get lower viscosity than cooking by batch.
I. FEATURE: Oxidized starch is used in paper industry mainly in surface treatment process in order to: Improve the paper surface strength, smoothness and stiffness of the paper. Improved printing properties. Improve the ability of waterproof paper with adhesive surface quality. Improve anti-dusting of paper surface. Good compatibility with most chemicals used in surface sizing solution (Size press). II. TYPICAL PROPERTIES - Appearance : White powder - Viscosity (mPa.s) :30-50 Brookfield Viscometer 15.0% dry substances at 50 C, 60rpm - pH : 5.0 - 7.0 (15% dry substance (cooked paste)) - Moisture (%) : 13.0 Max - Sieve analysis (%) : 1.50 Max (Mechanical sieving on 250 micron) - Shelf life : 24 months Note: The above characteristics are measured at certain condition and it could vary in the different conditions measurement. It is only for reference. These properties can be changed as required by the manufacturer's improvements without prior notice. III. APPLICATION FOR SIZEPRESS: 1. Batch cooking: Dissolve dry starch in cold water with a concentration of 15 - 20 % in the cooking tank equipped with heater and stirrer. Heat and stir the powder suspension continuously at room temperature of 90-950C for about 20 minutes to obtain a uniform liquid starch. 2. Spray continuously cooking: Dissolve dry starch in cold water with a concentration of 6 - 10%. Pump the starch suspension through the boiler tube and is heated directly by steam pressure of 2-4 bar Maintained the temperature in the cooking tank between 90-950C by adjusting the pressure of steam line. It should not be too high temperature in the cooking tank to avoid excessive starch hydrolysis. Cooking spray continuously will get lower viscosity than cooking by batch.
I. FEATURE: Oxidized starch is used in paper industry mainly in surface treatment process in order to: - Improve the paper surface strength, smoothness and stiffness of the paper. - Improved printing properties. - Improve the ability of waterproof paper with adhesive surface quality. - Improve anti-dusting of paper surface. - Good compatibility with most chemicals used in surface sizing solution (Size press). II. TYPICAL PROPERTIES - Appearance : White powder - Viscosity (mPa.s) : 80-130 Brookfield Viscometer 15.0% dry substances at 60 C, 100rpm - pH : 5.0 - 7.0 (15% dry substance (cooked paste)) - Moisture (% ) : 13.0 Max - Sieve analysis (%) : 1.50 Max (Mechanical sieving on 250 micron) - Shelf life : 24 months Note: The above characteristics are measured at certain condition and it could vary in the different conditions measurement. It is only for reference. These properties can be changed as required by the manufacturer's improvements without prior notice. III. APPLICATION FOR SIZEPRESS: 1. Batch cooking: - Dissolve dry starch in cold water with a concentration of 15 - 20 % in the cooking tank equipped with heater and stirrer. - Heat and stir the powder suspension continuously at room temperature of 90-950C for about 20 minutes to obtain a uniform liquid starch. 2. Spray continuously cooking: - Dissolve dry starch in cold water with a concentration of 6 - 10%. - Pump the starch suspension through the boiler tube and is heated directly by steam pressure of 2-4 bar - Maintained the temperature in the cooking tank between 90-950C by adjusting the pressure of steam line. - It should not be too high temperature in the cooking tank to avoid excessive starch hydrolysis. - Cooking spray continuously will get lower viscosity than cooking by batch.
