Origin: Vietnam => Material : Natural water hyacinth => Color: Yellow => Size: 10 cm, 18cm, 20cm, 25 cm , 30 cm => Design Style: Minimalist, Bohemian, Vintage => Use: Table Decoration, Decoration, Decor pieces for flower vases => Capacity: 3 continer 20 feet/ month.
Classification : Inconel Alloy Inconel Pipe It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Inconel Alloy Inconel Coil It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Inconel Alloy Inconel Bar It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Inconel Alloy Inconel Sheet It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi 5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi
* ISO Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Product Name : ISO Aluminum tube Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bending Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc Warehouse Storag :e Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* ASTM Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Product Name : ASTM Aluminum tube Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications : Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bending Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name : Aluminum tube Price range : $1000-$2000 Discounts are available for large orders Minimum order quantity : 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard : ASTM, JIS, DIN, GB, Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. certification : ISO,SGS,BV,TUV, Processing Service : Welding, Drilling, Cutting, Bending Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing : Wooden pallet or according to customer's request Lead time : 7 to 15 working days Payment terms : T/T ,LC Exporting country : Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum H-shaped steel Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
Aluminum Square Tube is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum Square Tube Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
Dx51d galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. The commonly used wrought zinc alloys are zinc aluminum alloy and zinc copper alloy. The former contains 4%~15% aluminum. In order to improve the strength and hardness of the alloy, a small amount of copper, magnesium and other alloy elements are added. It has high strength and is easy to form. It can replace some brass or duralumin to make precision forgings. The latter is 0.7%~1.5% copper, which can increase the strength and impact toughness of the alloy and reduce the plasticity. Zinc copper alloy is suitable for making daily hardware products or replacing part of brass. Product name DX51D Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material DX51D Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
Q195 galvanized sheet is a surface galvanized sheet with yield strength of 195MPa. Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. Product name Q195 Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material Q195 Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
DC01 Galvanized steel sheet is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration. Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. Product name DC01 Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material DC01 Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. Product name Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material CGCC,CGCH,G550,DX51D,DX52D,DX53D,etc. All according to the customer's request Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
Q235 galvanized sheet is a surface galvanized sheet with yield strength of 235MPa. Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. Product name Q235 Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material Q235 Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
LSAW Steel Pipe: Pipe Type: Longitudinal Welded Pipe, Longitudinal Submerged Arc Welded Pipe Application: Used for Fluids Transmission, Structural Support in Industrial Construction Specification: OD: 406mm ~ 1422 mm WT: 6.4mm ~ 44.5mm LENGTH: 5mtr ~ 12mtr Standard & Grade: ASTM A53 Grade A/B/C Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the proje
DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. The commonly used wrought zinc alloys are zinc aluminum alloy and zinc copper alloy. The former contains 4%~15% aluminum. In order to improve the strength and hardness of the alloy, a small amount of copper, magnesium and other alloy elements are added. It has high strength and is easy to form. It can replace some brass or duralumin to make precision forgings. The latter is 0.7%~1.5% copper, which can increase the strength and impact toughness of the alloy and reduce the plasticity. Zinc copper alloy is suitable for making daily hardware products or replacing part of brass. PPGL is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance. Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation. DX51D PPGI/PPGL Manufacturer JIS DIN high-quality electro-galvanized steel coil Product name: DX51D PPGI/PPGL Place of Origin: JChina Type: Steel Coil Standard: AiSi, ASTM, bs, DIN, GB, JIS Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.1-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing.
DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. The commonly used wrought zinc alloys are zinc aluminum alloy and zinc copper alloy. The former contains 4%~15% aluminum. In order to improve the strength and hardness of the alloy, a small amount of copper, magnesium and other alloy elements are added. It has high strength and is easy to form. It can replace some brass or duralumin to make precision forgings. The latter is 0.7%~1.5% copper, which can increase the strength and impact toughness of the alloy and reduce the plasticity. Zinc copper alloy is suitable for making daily hardware products or replacing part of brass. PPGL is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance. Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation. DX51D PPGI/PPGL Manufacturer JIS DIN high-quality electro-galvanized steel coil Product name: DX51D PPGI/PPGL Place of Origin: JChina Type: Steel Coil Standard: AiSi, ASTM, bs, DIN, GB, JIS Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.1-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: +1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing
* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam The characteristics of galvanized I steel: 1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m; 2. Good plasticity and toughness: no deformation in cold bending; 3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate. 4. Good fire resistance: high melting point (1000 C), strong fire resistance; 5. Long service life : 100 years. 6. Flexible and fast installation: short construction period. 7. The color is bright and durable, without surface decoration Standard DIN GB JIS BA AISI ASTM EN GOST etc. Shape : I -Beam Materials : Galvanized steel Size : As customer request Packing : By bundles with steel strips or as customer request Application : Mechanical&manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
