Find Verified Plastic Bag Machinery Suppliers, Manufacturers and Wholesalers

Our company offers for export Coconut shavings and coconut products from Vietnam. Prices from the manufacturer. FINE GRADE ( FAT CONTENT 63% MIN) Specifications : - Moisture : 3% (max) - FFA : 0.3% (max) - Fat content : 62% (min) - E.coli : Not detected - Salmonella : Not detected - Aflatoxin : Not detected - SO2 : 100ppm (max) - Free from foreign matter MEDIUM GRADE ( FAT CONTENT 63% MIN) Specifications : - Moisture : 3% (max) - FFA : 0.3% (max) - Fat content : 62% (min) - E.coli : Not detected - Salmonella : Not detected - Aflatoxin : Not detected - SO2 : 100ppm (max) - Free from foreign matter LOW GRADE (FAT CONTENT 25% MIN) Specifications : - Moisture : 3% (max) - FFA : 0.3% (max) - Fat content : 25% (min) - E.coli : Not detected - Salmonella : Not detected - Aflatoxin : Not detected - SO2 : 100ppm (max) - Free from foreign matter Package: In PE bag, multi- plies Kraft paper inner and PP bag outside, Net weight 25 kgs /bag as the buyerâ??s requirement. MOQ: (01) one container. Our prices are based on FOB Ho Chi Minh port (Incoterms-2010) and are preliminary. The final cost of each product will be agreed upon depending on the volume of the lot. But we also organize logistics to any port. Shipment by sea on terms of CIF port and FOB from Ho Chi Minh, Cat Lai port, Haiphong port, and Vung Tau port in Vietnam, placing in 20 feet and 40 feet containers. Air shipments from Ho Chi Minh Airport from 1000 to 5000 kg. to various cities according to the flight schedule. We have the opportunity to send frozen goods by air from 3000 to 5000 kg per flight. Our terms of cooperation and payment method: - Payment - 30% prepayment and 70% against scanned original documents - L/C 100% Loading time: 10 days after receiving the advance payment or opening the original letter of credit. Inspection: Sunrise/SGS/Cotecna/Vinacontrol by Seller's choice Certificates: ISO 22000:2018, HACCP, FSSC 22000, FDA, HALAL.

Our company offers peanuts from Vietnam for export. Prices from the manufacturer. In stock : Raw with skin: -Bold 50/60 -Bold 60/70 Raw Loading 20ft 20ton 50kg bags Roasted: -Bold 50/60 -Bold 60/70 -Split 1/2 Roasted -Split 1/8 Roasted -Split 1/16 Roasted Roasted Loading: cont 20 ft 14,4 ton ( 720 ctns x 20kg/ ctn) MOQ: (01) one container. Our prices are based on FOB Ho Chi Minh port (Incoterms-2010) and are preliminary. The final cost of each product will be agreed upon depending on the volume of the lot. But we also organize logistics to any port. Shipment by sea on terms of CIF port and FOB from Ho Chi Minh, Cat Lai port, Haiphong port, and Vung Tau port in Vietnam, placing in 20 feet and 40 feet containers. Air shipments from Ho Chi Minh Airport from 1000 to 5000 kg. to various cities according to the flight schedule. We have the opportunity to send frozen goods by air from 3000 to 5000 kg per flight. Our terms of cooperation and payment method: -Payment - 30% prepayment and 70% against scanned original documents -L/C 100% Loading time: 10 days after receiving the advance payment or opening the original letter of credit. Inspection: Sunrise/SGS/Cotecna/Vinacontrol by Seller's choice Certificates: ISO 22000:2018, HACCP, FSSC 22000, FDA, HALAL.

DC01 Galvanized steel sheet is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration. Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. Product name DC01 Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material DC01 Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement

* Stainless steel I-beam is a long steel bar with a grooved section. It can be used to form various stress components according to the different needs of the structure, and can also be used as a connector between components. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, hoisting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves. Stainless steel I-beam is a carbon structural steel used for construction. It is a simple section steel, mainly used for metal components and plant frames. Good weldability, plastic deformation performance and mechanical strength are required in use. The raw steel billet of stainless steel I-beam is low carbon square steel billet, and the finished stainless steel I-beam is delivered in hot rolling forming, normalizing or hot rolling state. Product Name : Stainless : Steel I beam Standard : DIN GB JIS BA AISI ASTM EN GOST etc. Size : As customer request Technique : Stainless steel Packing : By bundles with steel strips or as customer request Surface Treatment : Sandblasting, solution pickling Application : Mechanical & manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

* 304L stainless steel pipe is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, and other industries. Standard : Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249) Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2 Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3 Drinking water tube: GB / T 19228 Mechanical tube: ASTM A554, EN 10296-2 Size : Outer Diameter Range: 9.5~2000mm Thickness Range: 0.5~20mm (Size can be customized.) Length: Up to 11.8 meters per piece. Shape Section : Round, square, rectangular Application : Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on; Heat exchanger tube: condenser, boiler, super heater, evaporator and so on; Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on; Mechanical tube: handrail, railings, balustrade, hence and so on Features: 1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3m. 2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing. 3. Thick welding, good appearance.The mechanical properties of tube could be tested. 4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015. 5. Full material traceability is guaranteed during the manufacturing process. 6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness. 7. Internal Bore: Tubes have a smooth, clean and crevice free bore.

Product Name : NM400 Carbon Steel Plate Material : 41304140AISI4140A516Gr70A537C12A572Gr50A588GrBA709Gr50A633DA514A517AH36API5LB1E06501E100610CrMo910BB41BFBB503CoetenBDH36EH36P355GHX52X56X60X65X70Q460DQ460Q245RQ295Q345Q390Q420Q550CFCQ550DSS400S235S235JRA36S235J0S275JRS275J0S275J2S275NLS355K2S355NLS355JRS355J0S355J2S355G2NS355J2CNSA283GrASA612MSA387Gr11SA387Gr22SA387Gr5SA387Gr11SA285GrCSM400ASM490SM520SM570St523St37StE355StE460SHT60S690QS690QLS890QS960QWH60WH70WH70QWQ590DWQ690WQ700WQ890WQ960WDB620 Surface : Natural color coated galvanized or customized Technique : hot rolled or cold rolled Application : NM400 wear-resistant carbon steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc. It is also commonly used as high-strength structural steel with yield strength â?¥ 800MPa. Standard : DIN JIS GB ASTM AISI EN etc. Delivery time : Within 7-15 workdays after receiving deposit or L/C Export packing : Steel strips package or seaworthy packing Capacity : 250,000 tons/year Payment : T/T L/C, Western Union etc. Carbon Steel plate application range * NM400 wear-resistant carbon steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc. It is also commonly used as high-strength structural steel with yield strength â?¥ 800MPa. * Widely used in crushers, shale shakers, feed hoppers, skips, loaders, excavators, bulldozer buckets and knife plates, scraper conveyors, dump trucks, trams, pavers, asphalt mixing stations, knives, gears, mud pipeline systems, cement plant equipment, screw conveyors and other wear resistant structural parts * Function: It is mainly used to provide protection for places or parts requiring wear resistance, so as to prolong the service life of the equipment, reduce the maintenance downtime caused by maintenance, and correspondingly reduce the investment of funds. Performance: yield above 900 and tensile strength above 1100. Packing & Delivery * The Carbon steel sheet will be packed in seaworthy packing such as steel strips bundles. If you have any special requests on this, please let us know advanced. We will refer to your email kindly. 1).20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 2).40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 3).40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

Product Name : NM500 Carbon Steel Plate Material : 41304140AISI4140A516Gr70A537C12A572Gr50A588GrBA709Gr50A633DA514A517AH36API5LB1E06501E100610CrMo910BB41BFBB503CoetenBDH36EH36P355GHX52X56X60X65X70Q460DQ460Q245RQ295Q345Q390Q420Q550CFCQ550DSS400S235S235JRA36S235J0S275JRS275J0S275J2S275NLS355K2S355NLS355JRS355J0S355J2S355G2NS355J2CNSA283GrASA612MSA387Gr11SA387Gr22SA387Gr5SA387Gr11SA285GrCSM400ASM490SM520SM570St523St37StE355StE460SHT60S690QS690QLS890QS960QWH60WH70WH70QWQ590DWQ690WQ700WQ890WQ960WDB620 Surface : Natural color coated galvanized or customized Technique : hot rolled or cold rolled Application (NM500 steel plate is a high-strength wear-resistant steel plate with high wear resistance. * NM500 wear-resistant steel plate is widely used in engineering machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product parts. Standard * DIN JIS GB ASTM AISI EN etc. Delivery time : Within 7-15 workdays after receiving deposit or L/C Export packing : Steel strips package or seaworthy packing Capacity : 250,000 tons/year Payment : T/T L/C, Western Union etc. Carbon Steel plate application range * NM500 steel plate is a high-strength wear-resistant steel plate with high wear resistance. * NM500 wear-resistant steel plate is widely used in engineering machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product parts. Packing & Delivery * The Carbon steel sheet will be packed in seaworthy packing such as steel strips bundles. If you have any special requests on this, please let us know advanced. We will refer to your email kindly. 1).20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 2).40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 3).40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

Product introduction ERW Steel Pipe: Pipe Type: ERW Pipe, ERW Steel Pipe, Electric Resistance Welded Pipe Application: For Low Pressure Fluid Transmission, Machinery Manufacturing Specification: OD: 21.3mm ~ 660mm WT: 1mm ~ 17.5mm LENGTH: 0.5mtr ~ 22mtr (5.8/6/11.8/12 meters, SRL, DRL) Standard & Grade: API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70 ASTM A53, ASTM A500, JIS G3466, ASTM A252, ASTM A178, AN/NZS 1163, AN/NZS 1074, EN10219-1, EN10217-1 End: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped Production Process for ERW steel pipe: 1.Uncoiling 2. Leveling --- 3. End cutting --- 4. End shearing welding --- 5. Supercoil accumulator --- 6. Edge cutting --- 7. Ultrasonic detection --- 8. Forming --- 9. Electric induction welding --- 10. Ultrasonic detection for weld seam --- 11. Medium frequency heat treatment --- 12. Air cooling --- 13. Water cooling --- 14. Sizing --- 15. Flying cutting --- 16. Flush-out --- 17. Cropping --- 18. Flattening testing --- 19. Straightening --- 20. End facing and bevelling --- 21. Hydrodynamic testing --- 22. Ultrasonic detection for weld seam --- 23. Ultrasonic detection for pipe end --- 24. Visual and dimensions inspection --- 25.Weighting and measuring --- 26. Marking --- 27. Coating --- 28. Pipe-end protection --- 29. Bending --- 30. Shipping Specification of ERW steel pipe: API 5L/ASTM A53 GR.B (Small Diameter ERW Steel Pipe) Outside Diameter Wall Thickness Outside Diameter Wall Thickness (mm) (mm) (mm) (mm) 33.4 (1") 2.1-2.4 133 3.0-5.75 2.5-3.25 6.0-7.75 3.5-4.0 8.0-10 42.3 (1.2") 2.1-2.4 139.7 (5) 3.0-4.5 2.5-3.5 4.75-5.75 3.75 6.0-7.75 4.0-5.0 8.0-10 48.3 (1.5") 2.1-2.4 152 3.0-4.5 2.5-3.25 4.75-5.75 3.5-3.75 6.0-7.75 4.0-4.25 8.0-10.0 4.5-6.0 159 3.25-6.75 60.3 (2) 3.0-4.0 6.8-7.75 4.25-4.75 8.0-10.0 5.0-5.75 10.0-11.75 73 3.0-4.75 165 3.0-6.0 4.8-5.25 6.25-7.0 5.5-7.0 76.1 Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Product Name : Carbon Steel Plate Material : 4130 4140 AISI4140 A516Gr70A537C12A572Gr50 A588GrBA709Gr50A633DA514A517AH36API5LB1E06501E100610CrMo910BB41BFBB503CoetenBDH36EH36P355GHX52X56X60X65X70Q460DQ460Q245RQ295Q345Q390Q420Q550CFCQ550DSS400S235S235JRA36S235J0S275JRS275J0S275J2S275NLS355K2S355NLS355JRS355J0S355J2S355G2NS355J2CNSA283GrASA612MSA387Gr11SA387Gr22SA387Gr5SA387Gr11SA285GrCSM400ASM490SM520SM570St523St37StE355StE460SHT60S690QS690QLS890QS960QWH60WH70WH70QWQ590DWQ690WQ700WQ890WQ960WDB620 Surface : Natural color coated galvanized or customized Technique : hot rolled or cold rolled Application : It is widely used in engineering machinery, metallurgical machinery, coal industry, mining machinery,environmental protection machinery,the feeder,container,dumper bodies, sieve plate,hoister,edge plate,wheel gear,cutter etc other industry. Standard : DIN JIS GB ASTM AISI EN etc. Delivery time : Within 7-15 workdays after receiving deposit or L/C Export packing : Steel strips package or seaworthy packing Capacity : 250,000 tons/year Payment : T/T L/C, Western Union etc. Carbon Steel plate application range 1 . Power industry -- fan blades, burner pipelines, feeder and hopper lining, crusher parts, coal grinder parts, ash pipes, air handling systems and conveyors; 2 . Have spentIron and steel industry - hopper lining, grille, feeder and base, dump truck, hopper, pipe, pump shell, crusher parts, slag trough, various chassis, vibrating screen; 3 . Cement industry - impact plate, pipe, pump shell, mill lining, crusher parts, slag groove, various chassis, vibrating screen 4 . Paper industry -- inner lining of cyclone, screw conveyor, feeding trough and funnel, fan blade, conversion pipe, transition elbow; 5 . Mining industry -- truck cargo tank lining board, hopper lining, feed tank lining, crusher parts, cover plate, wear rod and wear plate;

* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A214 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

* 304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : 304L Specifications : Round bar Diameter : 0.1~500mm Hexagonal bar : Size: 2mm~100mm Flat bar : Thickness : 0.3~200mm Width : 1~2500mm Square bar : Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment

* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A106Gr. B Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing * Waterproof paper, and steel strip packed. * Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts

* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. * Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A53 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A179 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Material * ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022) * DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) * BS(040A04,095M15,045M10,080A40,045M10,080M50) * Thickness : 0.1mm-300mm or as required * Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. * Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance + 0.1mm * Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. * Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.