Superior products are stainless steel series, carbon steel series, galvanized steel series, alloy steel series, ppgi, ppgl, rebar, wire etc.Export, manufactured and distribution
Sawdust Briquette Charcoal is an organic material derived from wood, bamboo, and cork that is thinly planed and crushed. Due to their small size and unevenness, in the past sawdust was rarely used and was only considered a type of natural waste. Currently, people use Japanese technology to produce sawdust charcoal. Specification of SAWDUST Charcoal Moisture: 5% Max Ash: 3% Max Volatile matter: 8.01% Max Fixed Carbon: 80% Min Calorific: 7900 Kcal/kg Min Burning time: 5-6 hours
A mangrove is a type of mangrove tree living in the coastal area, the area where brackish water and salt water intersect. Southeast Asia is an area with a favorable climate for these plants. The wooden body is crooked, there are eyes on the body, the wood color is slightly red-yellow. A mangrove has the effect of reducing natural disasters in the sea. In addition, it is also a raw material for charcoal production or as fuel. Specification of MANGROVE Charcoal Moisture content: 2.39% Ash content: 2.04% Volatile matter content: 21.95% Fixed carbon content: 76.01% Calorific value: 7504 kcal/kg Burning time: 4-5 hours Dimension of MANGROVE Charcoal Shape: Round stick Diameter: 3-8 cm Length: cut as customer's request (12-20 cm)
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Standard JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material Monel400 Specifications Round bar Diameter:0.1~500mm Hexagonal bar Size: 2mm~100mm Flat bar Thickness 0.3~200mm Width 1~2500mm Square bar Size: 1mm*1mm~800mm*800mm Length 2m, 5.8m, 6m, or as required. Surface Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term Ex-work, FOB, CFR, CIF, etc. Export to Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time Standard size is in stock,prompt delivery or as order's quantity. Package Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment and the project, in order to ensure the quality of the project.
* Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields. Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material : Hastelloy C-276 Specifications Round bar Diameter : 0.1~500mm Hexagonal bar Size : 2mm~100mm Flat bar Thickness : 0.3~200mm Width : 1~2500mm Square bar Size: 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Q195 Galvanized Round Steel is a surface galvanized sheet with yield strength of 195MPa. Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name Q195 Galvanized Round Steel Diameter 16-250mm or Customized Length Customized Advantages Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: �½ of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment Galvanized Mechanical Property Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc.
Q235 Galvanized Round Steel is a surface galvanized sheet with yield strength of 235MPa. Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name Q235 Galvanized Round Steel Diameter 16-250mm or Customized Length Customized Advantages Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: �½ of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment Galvanized Mechanical Property Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
Application Spiral snail rebar Payment Terms 30%TT Advance + 70% Balance Type For construction Delivery Term CFR CIF FOB ETC. MOQ 1 Ton Quality High Quality Delivery time 7-15 Days Sample Avaliable Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement. Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period Application field The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Product Name Straight Wire Rod Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~18MM Length 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Application Rebar Payment Terms 30%TT Advance + 70% Balance Type For construction Delivery Term CFR CIF FOB ETC. MOQ 1 Ton Quality High Quality Delivery time 7-15 Days Sample Avaliable Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement. Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name : Carbon Steel Wire Rods Material : Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Wall Thickness : 0.1MM~12MM Length : in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard : JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape : Round Technique : Hot rolled Packing : Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Ends : Plain end MOQ : 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient * Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. * Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. * Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name : Galvanized Angle Surface : BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Edge : Plain Mill Standard : ASTM DIN GB JIS EN AISI * Use of galvanized angle steel: widely used in power tower, communication tower, curtain wall materials, shelf construction, railway, highway protection, street lamp pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Hot dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold galvanizing coating mainly ensures full contact between zinc powder and steel through electrochemical principle, and generates electrode potential difference to prevent corrosion. It is used to immerse the derusted angle steel in the molten zinc at about 500 â?? to make the angle steel surface adhere to the zinc layer, so as to prevent corrosion. It is suitable for various strong acid, alkali fog and other strong corrosion environments. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
Product Name : Carbon steel angle Surface : Pickling, Phosphating, Galvanizing Edge : Plain Mill Standard : ASTM DIN GB JIS EN AISI The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Product Name : Stainless steel angle bar Surface : Pickling, Phosphating, Galvanizing Edge : Plain Mill Standard : ASTM DIN GB JIS EN AISI * The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
