We are stocking good quality Used Rail for sale and export
- R50-R65: 355 USD per MT from Kenya - R50-R65: 355 USD per MT from Zambia - R50-R65: 280 USD per MT from South Africa Samples up to 1kg can be sent via DHL at a cost of around 400usd. The only thing would be to confirm the price day and discuss the payment methods requested by the sellers, which consist normally of the following for first order or trial: - Payment Terms: 30% TT Telegraphic Transfer upfront advance deposit against Proforma Invoice and 70% After Delivery at Destination discharge port or - Payment Terms: 30% TT Telegraphic Transfer upfront advance deposit against Proforma Invoice and 70% LC or - Payment Terms: 30% TT Telegraphic Transfer upfront advance deposit against Proforma Invoice and 70% LC Against BL and shipping documents
We are stocking good quality Used Rail Scrap for sale
We are well known Dealer and supplier of good quality Used Rail Scrap and we have stock ready for sell and export
We are supplier and dealer of good quality Used Rail and we have available stock for sell in our warehouse
Railways R50/R60/R65 Specifications 1. SPECIFICATIONS OF RAILWAYS: R50/R60/R65: SECOND QUALITY-RAILWAY RAIL STEEL NO. 1. STANDARD SECTION TEE RAILS, ORIGINAL WEIGHT 50 POUNDS PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG. 28)B) (28C) RAIL STEEL NO.2 T RAIL ENDS STANDARD SECTION ORIGINAL WEIGHT 50 POUNDS PER YARD AND OVER 12.50 POUNDS PER YARD AND OVER 12.50 METERS RAIL, STEEL NO.3, STANDARD SECTION FEE, GENDER, AND / OR GUARD RAILS, FREE FROM FROG AND SWITCH RAILS NOT CUT APART, AND CONTAIN NO MANGANESE, CAST, WELDS OR ATTACHMENT ANY KIND EXCEPT ANGLE BARS ALSO RAILS, NOT FOUND AND WITHOUT RADIATION AND EXPLOSIVE SUBSTANCE�¢?�¦ 1.0M ( 1.0 1.5M( RAIL FERROUS (R 50/ R65 ) CHEMICAL COMPOSITION SHALL BE ACCORDING TO Chemical Composition R65 GOST 8165.75 WEIGHT 64.72 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE R50 GOST 7173.75 WEIGHT 51.67 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE Country of Origin SAUDI ARABIA
Roller manufactured in special steel and used for moving long-welded rails. The supporting structure is composed of a roller thatruns on two bearings and it is able to support the weight of the rail.
Railway 2nd quality R50/R65
Payment terms- SBLC/DLC/TTMT103 Monthly availability- 100,000 tons/ month * 12 Origin- East Africa Please email /whatsapp for further communication.
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Brand Name Linkage Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s) Cutting time 60kg / m rail, â?¤120S Number of usage 50kg /m rail, use â?¥ 4 times Number of usage 2 60kg /m rail, use â?¥ 3 times Machine weight 39.5kg
we supply R50 And R65 CIF all world.
Manufactured Rails R50-R65 available from Saudi Arabia: MOQ: 50,000 tonnes/month x 12 months Two months back the total qty available was 800,000 tonnes with potential to increase the supply upon serious orders. CIF price: USD 280/tonne There is no FOB price. No trial qty. Any trial may be treated as a spot order whose price will drastically go higher; therefore, we strongly discourage trial requests Loading port: Jeddah, Dammam Payment terms: Transferable LC or SBLC, autorevolving monthly. Payment can be done at the destination port. There is no advance invoice fee. This is handled by the mandate. If POP or yard visit is required then the buyer must issue MT-705. Procedure: The buyer issues official LOI on letterhead, signed/stamped with full contact details and requirement stated. The LOI must state that all terms and conditions as per SCO have been agreed upon including issuance of MT-705 (in case of POP or yard visit requirement). The seller issues FCO The buyer signs FCO and issues ICPO. The seller issues SPA. The SPA may be attested by the Saudi Chamber of Commerce (to be confirmed later). The buyer signs and issues MT-705 (in case POP video is wanted). The buyer issues Transferable DLC autorevolving, monthly The seller issues 10% PB Direct buyers should send official LOI to my email. We do not accept LOIs from middlemen/mandates so it has to be from the buyer who will also issue the financial instrument. If we receive any email from an intermediary we will first confirm the credibility of the LOI with the buyer. There is no markup for commission.
Second hand steel railway and all other kind of steel available, we accept only minimum orders of 500,000 M ton with LM700 credit line
Used railway tracks. .
Used rail.
Dear Sirs: We are the sellers mandate of a big producer of 2nd class rails R50 and R65 in Unlike some other stuff of iron and steel, our railway rails are subject to very high stress level and are made of very high-quality steel. Moreover, if requested by the Buyer, they can be cut down to 1 m long with no extra charge. Delivery per month: Minimum - 50.000 MT; Maximum - 350.000MT Total delivery ( MOQ) - 200.000 MT Packing: Break bulk or Container Inspection: Loading port by SGS or other reputed agency on Unloading port: SGS or other reputed agency on expenses, if required. Terms of delivery: CIF. If you are a possible buyer of this stuff or other related products, we will be very much obliged if you have the kindness of keeping in touch with us, in order to provide you our SOP, as well as the best possible prices and conditions. Our team will be at your disposal for whatever doubt you may have.
Hms scrap, used rails, jet fuel and diesel.
Specifications :- used rails - R50/R65 Carbon (C): 0.54 0.082% Manganese (Mn) 0.75 - 1.05%, Silicon (Si): 0.18 0.40%, Phosphorous (P): Max. 0.035%, Sulphur (S): Max. 0.045%, Arsenic (Ar): Max. 0.15% Width: 0.5 m Iron Balance: Norms R50 Gost 7173-73 and R65 Gost-8165-75 R50(51.67KG/M)-Gost- 7173-75 R65(64.72KG/M)- Gost- 8165-75
Products: HMS 1 and HMS 2 Metal Scrap Grade: AA Type: Rail Scrap, Casting Irons etc Metal: 100% Alloy Or Not: Non-Alloy Color: Multiolor Secondary or not: Non-secondary
RAIL ROAD SCRAP, DIFFERENT LENGHT AVAILABLE CUTTED TO CUSTOM SIZES REQUEST OR AS IS0 +502 49321537 lagexco % g % mail % dot com
