Champion Blue Flame Synthetic Blend series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines. Oxidation Control- Champion Blue Flame Synthetic Blend series engine oils take oxidation resistance to another level, allowing users to achieve longer drain intervals, reduce maintenance and downtime, and extend engine life. Controlling oxidation, corrosive acids, sludge and varnish precursors allows for extended drains and minimized wear even under the most extreme conditions. Synthetic base oils provide reduced volatility and oil consumption, further reducing the build-up of sludge and varnish. Oxidation lower than OEM limits in over 60,000 mile on-highway and 600 hour off-highway drain intervals.â?¢ Proprietary additives and synthetic base oils have shown up to 80% reduction in Volvo T-13 oxidation. Wear Control- Champion Blue Flame Synthetic Blend series engine oils keep your engines going longer by reducing engine wear, preventing high temperature corrosion and controlling abrasive soot contamination, even while allowing for improved fuel economy and lower total cost of ownership. Synthetic base oils improve cold-flow properties and reduce start-up wear, leading to extended engine life and performance. Over 75% less pushrod wear, 85% less injector screw wear and 70% better resistance to filter-plugging than CJ-4 oils in proprietary, extra-severe engine testing. Outperformed corrosion bench testing limits by 70% for copper and over 98% for lead and tin.â?¢ Cold-pumping viscosity 72% lower (SAE 15W-40) and 69% lower (SAE 10W-30) than J300 limits, providing excellent lubrication and wear protection at start Part# 4358N/4 4/1 Gal. Part# 4358U/2 2/2.5 Gal. Part# 4358AN 55 Gal.
CHAMPION UltraFleet Full Synthetic (CK-4) series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. High TBN Retention Increased Wear Protection Oxidation Resistance OEM Certified Longer Drain Intervals Improved Fuel Economy CHAMPION UltraFleet Full Synthetic (CK-4) series engine oils meet or exceed the following specifications: API CK-4, CJ-4, CI-4 Plus, SN Volvo VDS-4.5, VDS-4 Cummins CES 20081 Renault VI RLD-3 ACEA E7-16, E9-16 Cummins CES 20086 Detroit Diesel DFS93K222 Mack EO-O Premium Plus JASO DH-2 Detroit Diesel DFS93K218 Ford WSS-M2C171-F1 CAT ECF-3 Part# 4164N/4 4/1 Gal.
UltraFleet HD Syn-Blend 15W-40 CK-4 Diesel Engine Oil CHAMPION UltraFleet Synthetic Blend CK-4 series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines. Champion UltraFleet Synthetic Blend CK-4 Oils Meet or Exceed the Following Specifications: API CK-4, CJ-4, CI-4 Plus ACEA E7-12, E9-12 JASO DH-2 â?¢ Volvo VDS-4.5, VDS-4 Cummins CES 20086, CES 20081 Detroit Diesel DFS93K218 Detroit Diesel DFS93K222 Ford WSS-M2C171-F1 Mack EO-O Premium Plus Renault VI RLD-3 CAT ECF-3 Part# 4159N 1 Gal. Part# 4159AN 55 Gal.
UltraFleet HD Syn-Blend 10W-30 CK-4 Diesel Engine Oil CHAMPION UltraFleet Synthetic Blend CK-4 series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines. Champion UltraFleet Synthetic Blend CK-4 Oils Meet or Exceed the Following Specifications: API CK-4, CJ-4, CI-4 Plus â?¢ ACEA E7-12, E9-12 JASO DH-2 Volvo VDS-4.5, VDS-4 Cummins CES 20086, CES 20081 Detroit Diesel DFS93K218 Detroit Diesel DFS93K222 Ford WSS-M2C171-F1 Mack EO-O Premium Plus Renault VI RLD-3 CAT ECF-3 Part# 4161N 1 Gal. Part# 4161AN 55 Gal.
Blue Flame Classic Blend 15W-40 (Pre-2007) Diesel Engine Oil CHAMPION CLASSIC BLUE FLAME SAE 15W-40 synthetic blend heavy duty diesel engine oil is purpose built for the protection and performance of pre-2007 diesel engines. Champion brought back the anti-wear, detergent, and dispersant additives, proven over decades to deliver superior protection and lubricity in pre-2007 model year diesel engines, and moved diesel engine oil performance to a higher level by combining them with shear stable synthetic base oils. Champion also included its exclusive TVS (Thermal Viscosity Stabilizer) polymer chemistry borrowed from our CHAMPION RACING motor oil technology. This proprietary technology delivers unmatched film strength at high temperature, better piston ring seal for maximum compression, and increases the foot-pounds of torque in most engines. It is designed to specifically address extreme performance demands of turbo or super-charged pre-2007 model year diesel engines. KEY FEATURES: Synthetic blend SAE 15W-40 formula Exceeds API service categories CI-4 Plus, CI-4, CH-4, and CG-4 performance levels Advanced viscosity and soot control technology for shear stability and engine cleanliness High reserve alkalinity controls acid formation reducing corrosive wear and thermal viscosity breakdown Part# 4359H 12/1 QT. Part# 4359N 4/1 Gal. Part# 4359U 2/2.5 Gal. Part# 4359AN 55 Gal.
Premium Heavy-Duty 15W-40 Diesel Engine Oil Champion Premium HD 15W-40 engine oil is designed to provide robust performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines. Oxidation Control- Champion Premium Heavy Duty engine oil takes oxidation resistance to another level, allowing users to achieve longer drain intervals, reduce maintenance and downtime, and extend engine life. Controlling oxidation, corrosive acids, sludge and varnish precursors allows for extended drains and minimized wear even under the most extreme conditions. Oxidation lower than OEM limits in over 60,000 mile on-highway and 600 hour o-highway drain intervals Robust additives provide over 45% better oxidation resistance than CK-4 limits on Volvo T-13 Wear Control- Champion Premium Heavy Duty engine oil delivers value keep your engines going longer by reducing engine wear, preventing high temperature corrosion and controlling abrasive soot contamination. Higher resistance to permanent shear loss and exceptional wear protection provide unmatched value for many diesel fleets. Champion Premium Heavy Duty Oils meet or exceed the following specifications: API CK-4, CJ-4, CI-4 Plus, ACEA E7-16, E9-16 JASO DH-2 â?¢ Volvo VDS-4.5, VDS-4 Cummins CES 20086, Detroit Diesel DFS93K218 Cummins CES 20081 Detroit Diesel DFS93K222 Ford WSS-M2C171-F1 Renault VI RLD-3 Mack EO-O Premium Plus CAT ECF-3 Part# 4152H 12/1 QT. Part# 4152N 4/1 Gal. Part# 4152U 2/2.5 Gal. Part# 4152D 5 Gal. Part# 4152AN 55 Gal.
SynGold 0W-20 Full-Syn API SP GF-6A, Dexos1:2015 Motor Oil Champion SynGold Full Synthetic Engine Oils are blended with premium synthetic of base oils and specially selected additives to provide modern gasoline engines with superior protection against wear, sludge, varnish, deposits, and oxidation. They also protect against oil-related stochastic pre-ignition (SPI or LSPI) in turbocharged, direct-injection gasoline engines (TGDI). Exceeds requirements of Dexos 1 Gen 2 (SAE 0W-20 and SAE 5W-30) Protects against knock in direct-injected, turbocharged engines Reduces timing chain wear Protects against soot-induced wear Excellent protection against sludge, varnish and engine deposits Resists oxidation and protects turbocharger bearings Superior oil life and engine protection Part# 4429H/6 6/ 1 QT. Part# 4429AN 55 Gal.
We are direct with refinery and we are ready to supply this product: LIQUEFIED NATURAL GAS (LNG) Minimum liftable quantity: 50,000 MT, Maximum: 400,000 MT. Monthly price: $230.00 USD CIF Other petroleum products are available
Specify the product as moisture-proofing membrane for building foundations, industrial flooring applications and roofing general insulation. PROPERTIES Gloss level : Matt (ISO 2813-78) Solids : 25% (+/- 2 %) Viscosity : 22000 cps @25ï?°C Brookfield 4/4) Theoretical Coverage: 1 â?? 1, 5 m2/lit (@ 40ï?Â)
LPG
LNG
Lubricants Ester of 12 hydroxystearic Syntholube h-450 Oloa (additive package-no number) Ia-160 additive package Potassium persulfate Triethylene glycol (w/ 4% cellulose acetate) Precipitated silica 135 Copper pibsa Fatty acid (trimer) Polyethylene micro powder (40 mesh) Precipitated silica (hi-sil 135) Fyrol pcf (flame retardant) Polybutene with eva Hystrene 3675 (dimer) Lexemul 561 Lexemul as Lexolube n-110
Elefac I-205 Octyl Dodecyl Neopentanoate 1 Drum, 390lbs
Motor lube oil in quarts, in gallon, drums , bulk all type lube oil ready.
Petroleum Hydrocarbons ranging from the bottom end of Diesel Fuel to Fuel Oil, inclusive of an excellent feedstock for lubricating oils. Excellent properties for shipment as raw material or as finished product.
Sugar, sunflower oil, red palm oil, thermal coal, and petroleum oils.We are a global trading company based in the united states offering many commodity services with our network of supply chain operations across the globe.
D2, bitumen, jeta1, mazute,d6, jp54, petroleum coke,lco, ago,en590,espo,lpg ,lng fuel oil cst 180.
Jp54 jet fuel & urea, petrochemical product.
Jet fuel ( aviation kerosene colonial grade ) and other products ranging from petcoke, lng, lpg, en590 10ppm, d2, d6, ago, urea n46%.
Fuel products like jp54, d2, d6, mazut, lng, lpg, espo, en590, jeta1, urea 46%, petcoke, m100, lco, espo, lng, lpg and other fuel types .Distributors, mandate, cif, fob, tt, tto and ttv basis, broker
