Thermo Scientific
Protedyne 96 well 20ul ART filtered, sterile tips
ART barrier tips provide 100% security against aerosols and liquid contamination. Racks offer quick and easy access to pipette tips, saving valuable time. Front latch closes and locks, ensuring safe and secure storage throughout
Molecular BioProducts
Thin-wall PCR tubes 0.2 ml individual tubes w/dome caps green
Molded from 100% virgin polypropylene. Tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. Plates feature elevated well rims to ensure uniform sealing.
PurePak packaging reduces contamination from reaching into a bulk bag of tubes by dividing tubes into 10 separate PurePaks
Certified RNase-, DNase-, DNA, and Pyrogen-free
Clear, nonsterile
Thermo Scientific
ClipTip 300 low retention 10 x 96 tips
ClipTip pipette tips feature 'clips' that lock tips in place and form a complete seal
Each time ClipTip pipette tips are on, they are sealed and will not loosen regardless of application pressure
ClipTip pipette tips are clipped securely on the F1-ClipTip and E1-ClipTip pipettes with a light touch eliminating the frustration of banging tips on your pipette
High-clarity polypropylene
Graduated in 0.1 and 0.25mL markings
Withstand forces up to 30,000 x g
Easy-open caps with needle insertion spot and textured marking area
Labeling area on tube exterior
Highly polished interior for maximum sample recovery
Temperature range of -80 to +121 C
Fit all standard rotors
Nonpyrogenic
Autoclavable at 121 C/15psi for 15 minutes
Fisherbrand microcentrifuge tube craps screw caps without O-rings blue
Fisherbrand
Graduated at 1.0mL intervals
Large, frosted writing area
Available as pre-sterilized and nonsterile tubes
Blue cap fits both 5 and 10mL tubes
Secure fit between tube and cap to give leakproof seal
10522 Miscellaneous Suppliers
Short on time? Let Miscellaneous sellers contact you.
Fisherbrand microcentrifuge tubes 1.5ml Graduated tube with flat cap natural
Fisherbrand
Manufactured from durable chemical-resistant polypropylene
0.6mL tube is graduated in 0.2mL increments; 1.5mL tube, in 0.5mL increments with an additional graduation at 0.1 and 2.0mL size, in 0.5mL increments
Designed for use in critical applications where minute sample recovery is important
Withstand speeds up to 30,000xG
Recommended for freezer-to-centrifuge use
Autoclavable up to 120 C and withstand freezing temperatures as low as 80 C
RNase/DNase free
Fisherbrand specialty tips maxi pipet tips 1-10mL natural
Fisherbrand
Designed for use when transferring large sample volume
Advanced molding technology ensure tips are straight
Alternative option to serological pipets
Nonsterile; certified by an independent laboratory to be RNase, DNase, DNA, and Pyrogen free
Thermo Scientific
Aerosol resistant tip 200 barrier tip
Nest Aerosol Filter Pipet Tips are designed and manufactured using premium-grade 100% polypropylene for the most critical molecular biology liquid handling applications. All Nest Aerosol Filter Tips are gamma irradiated Sterile and Certified RNase/DNase-Free, human DNA-Free, and Pyrogen-Free. In addition, Nest Aerosol Filter Tips are Ultra-Clear with a Fine-Point design for the convenient, precise pipetting of precious nucleic acid and protein samples and are designed to be Universal-fit for the majority of research-grade pipettors.
Thermo Scientific
12mm x 75mm test tube polypropylene non-sterile
Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP).
The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable.
Tubes with dual position snap caps (LDPE) provide either aerobic or anaerobic storage of samples. Note - Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for anaerobic cultures.
Polypropylene thin-wall PCR tube with a flat cap is specifically designed for PCR and thermal transfer applications
Volume: 0.2mL; material: 99.9 percent virgin polypropylene
Color: orange
Unique flat cap design guarantees a perfect fit to prevent sample evaporation during thermal cycling
Certified RNase, DNase, and pyrogen-free to ensure the purity of your reaction
Fisherbrand 0.6 mL MCT Graduated Natural
high-clarity polypropylene
Graduated in 0.1mL markings
Withstand forces up to 30,000 x g
Easy-open caps with needle insertion spot and textured marking area
Labeling area on tube exterior
Highly polished interior for maximum sample recovery
Temperature range of -80 to +121 C
Fit all standard rotors
Nonpyrogenic
Autoclavable at 121 C/15psi for 15 minutes
Ensure accurate, precise pipetting. Thermo Scientific Finntip Pipette Tips are manufactured using high quality raw materials and the latest molding techniques. Finntips are designed using our knowledge of liquid handling. Our modern automated production facilities, and our expertise, enable us to produce uniformly smooth, hydrophobic surfaces on the inside and outside of our tips, to prevent liquid retention.
Plastic transfer pipettes are molded into one-piece units from low-density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling. They can be sterilized if required by gas or radiation. Pipettes are supplied non-sterile. Large capacity. Fits small standard 10mm test tubes. Ideal for large volume transfers.
Thermo scientific 1250ul, XL length graduated pipette tip
Atleast 4 cartons of 10 pacls each pack is 1000 tips
Meet the demands of daily pipetting with Thermo Scientific pipette and tip systems. Improve accuracy and precision with pipetting systems that incorporate years of experience and innovation for consistent, reproducible results. All you need, including worldwide service, support, and application knowledge delivering smart solutions to fit your specific needs in the lab. Move ahead with complete confidence.
Orders more than $500 will be free shipping.
SHIPPING:
DHL
Sea shipping for bulk orders
3 to 7 business days shipping
Fluotics designs its Beckman P30 automation tips for maximum compatibility with the Beckman Biomek robotic liquid handlers. When using our Beckman Biomek compatible automation tips a separate labware definition is unnecessary. Biomek automation control software protocols also do not need to be modified.
Orders more than $500 will be free shipping.
KingFisher deep-well 96 plate
KingFisher
Optimize your performance using Thermo Scientific KingFisher consumables designed specifically for use with the KingFisher Flex, Duo Prime, and Presto instruments. KingFisher instruments utilize disposable plastic plates and tip combs made of polypropylene, which are ideal for magnetic particle processing due to their low binding affinity for biomolecules. Both the yield and quality of the isolated protein or nucleic acid are significantly improved with special plates and tip combs designed for KingFisher systems.
VWR 10"x10" 120 V Ceramic Hotplate Magnetic Stirrer- Model 97042-754 - Brand NEW
VWR
VWR Professional Hot Plate Stirrer
Designed for applications requiring exceptional accuracy, stability, and repeatability, VWR�® Professional Hot Plate Stirrers are equipped with an exclusive safety system that helps protect both the operator and sample.
Excellent temperature uniformity
Digital display for temperature, speed, and time
Cool touch, chemical-resistant housing
Includes an RTD temperature probe kit
Exclusive five-year warranty
Available with a NIST Traceable, ISO/IEC 17025 Accredited Calibration Certificate from Troemner
Industry Leading Safety Features
120V, 1550W, 12.9A 33W x 45.5L x 10.9H cm (13 x 1715/16 x 45/16") 25.4 x 25.4 cm (10 x 10") 6000 mL Ceramic 7.9 kg (17.4 lbs.) 97042-754
Speed stability + 2%
Timer - 1 second to 160 hours
Operating conditions - 5 to 40 C (41 to 104 F)
Temperature Range 5 above ambient to 500 C (932 F) for ceramic top, 5 above ambient to 400 C (752 F) for aluminum top
Speed range - 60 to 1600 rpm
Temperature Stability - + 1%
Tecan
QSP 10 ul filtered Tip for Tecan GENESIS Black, Conductive, Sterile
Description
Tecan 30000627. Disposable Tips 200ul, Black, Conductive, Sterile, non-filtered. Diet tip Liha.
96 tips/case. Robotic Pipette Tips are manufactured with 100% virgin polypropylene; in addition, the racks are designed to endure the applied pressures of automated workstation
SP Microcentrifuge Tubes 2.0 mL Natural
Cardinal Health
Description:
Capacity 2.0mL
High-clarity polypropylene
Graduated in 0.25mL increments
Withstand forces up to 30,000 x g
Easy-open caps with needle insertion spot and textured marking area
Labeling area on tube exterior
Highly polished interior for maximum sample recovery
Temperature range of -80 to +121 C
Fit all standard rotors
Nonpyrogenic
Autoclavable at 121 C/15psi for 15 minutes
10522 Miscellaneous Suppliers
Short on time? Let Miscellaneous sellers contact you.
