Molecular BioProducts Thin-wall PCR tubes 0.2 ml individual tubes w/dome caps green Molded from 100% virgin polypropylene. Tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. Plates feature elevated well rims to ensure uniform sealing. PurePak packaging reduces contamination from reaching into a bulk bag of tubes by dividing tubes into 10 separate PurePaks Certified RNase-, DNase-, DNA, and Pyrogen-free Clear, nonsterile
Thermo Scientific ClipTip 300 low retention 10 x 96 tips ClipTip pipette tips feature 'clips' that lock tips in place and form a complete seal Each time ClipTip pipette tips are on, they are sealed and will not loosen regardless of application pressure ClipTip pipette tips are clipped securely on the F1-ClipTip and E1-ClipTip pipettes with a light touch eliminating the frustration of banging tips on your pipette
Fisherbrand 1.5mL MCT Graduated natural High-clarity polypropylene Graduated in 0.1 and 0.25mL markings Withstand forces up to 30,000 x g Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
Fisherbrand microcentrifuge tube craps screw caps without O-rings blue Fisherbrand Graduated at 1.0mL intervals Large, frosted writing area Available as pre-sterilized and nonsterile tubes Blue cap fits both 5 and 10mL tubes Secure fit between tube and cap to give leakproof seal
Fisherbrand microcentrifuge tubes 1.5ml Graduated tube with flat cap natural Fisherbrand Manufactured from durable chemical-resistant polypropylene 0.6mL tube is graduated in 0.2mL increments; 1.5mL tube, in 0.5mL increments with an additional graduation at 0.1 and 2.0mL size, in 0.5mL increments Designed for use in critical applications where minute sample recovery is important Withstand speeds up to 30,000xG Recommended for freezer-to-centrifuge use Autoclavable up to 120 C and withstand freezing temperatures as low as 80 C RNase/DNase free
Fisherbrand specialty tips maxi pipet tips 1-10mL natural Fisherbrand Designed for use when transferring large sample volume Advanced molding technology ensure tips are straight Alternative option to serological pipets Nonsterile; certified by an independent laboratory to be RNase, DNase, DNA, and Pyrogen free
Thermo Scientific Aerosol resistant tip 200 barrier tip Nest Aerosol Filter Pipet Tips are designed and manufactured using premium-grade 100% polypropylene for the most critical molecular biology liquid handling applications. All Nest Aerosol Filter Tips are gamma irradiated Sterile and Certified RNase/DNase-Free, human DNA-Free, and Pyrogen-Free. In addition, Nest Aerosol Filter Tips are Ultra-Clear with a Fine-Point design for the convenient, precise pipetting of precious nucleic acid and protein samples and are designed to be Universal-fit for the majority of research-grade pipettors.
Thermo Scientific 12mm x 75mm test tube polypropylene non-sterile Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE) provide either aerobic or anaerobic storage of samples. Note - Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for anaerobic cultures.
Polypropylene thin-wall PCR tube with a flat cap is specifically designed for PCR and thermal transfer applications Volume: 0.2mL; material: 99.9 percent virgin polypropylene Color: orange Unique flat cap design guarantees a perfect fit to prevent sample evaporation during thermal cycling Certified RNase, DNase, and pyrogen-free to ensure the purity of your reaction
Fisherbrand 0.6 mL MCT Graduated Natural high-clarity polypropylene Graduated in 0.1mL markings Withstand forces up to 30,000 x g Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
Thermo Scientific Finntip 250 Universal Sterile Ensure accurate, precise pipetting. Thermo Scientific Finntip Pipette Tips are manufactured using high quality raw materials and the latest molding techniques. Finntips are designed using our knowledge of liquid handling. Our modern automated production facilities, and our expertise, enable us to produce uniformly smooth, hydrophobic surfaces on the inside and outside of our tips, to prevent liquid retention.
Cardinal health Plastic Transfer Pipet Lg Bulb Plastic transfer pipettes are molded into one-piece units from low-density polyethylene. They eliminate cross-contamination encountered with rubber bulbs and reduce exposure when working with hazardous or infectious samples. Ideal for all laboratory procedures that require fast and safe transferring of liquids. Pipettes can also be used as freeze vials or as storage and transport containers by merely heat sealing the tips closed after filling. They can be sterilized if required by gas or radiation. Pipettes are supplied non-sterile. Large capacity. Fits small standard 10mm test tubes. Ideal for large volume transfers.
MPB Hotstart Micro 20 strip 0.2 ml 8-tube strips for 15-25 ul Suitable for 0.2mL thermal cycler blocks 0.25mL maximum volume when closed Thin-wall design Cleanroom produced Virgin polypropylene SHIPPING: DHL Sea shipping for bulk orders
Thermo scientific 1250ul, XL length graduated pipette tip Atleast 4 cartons of 10 pacls each pack is 1000 tips Meet the demands of daily pipetting with Thermo Scientific pipette and tip systems. Improve accuracy and precision with pipetting systems that incorporate years of experience and innovation for consistent, reproducible results. All you need, including worldwide service, support, and application knowledge delivering smart solutions to fit your specific needs in the lab. Move ahead with complete confidence. Orders more than $500 will be free shipping. SHIPPING: DHL Sea shipping for bulk orders 3 to 7 business days shipping
Beckman coulter p250 pipette tips Fluotics designs its Beckman P30 automation tips for maximum compatibility with the Beckman Biomek robotic liquid handlers. When using our Beckman Biomek compatible automation tips a separate labware definition is unnecessary. Biomek automation control software protocols also do not need to be modified. Orders more than $500 will be free shipping. SHIPPING: DHL Sea shipping for bulk orders
KingFisher deep-well 96 plate KingFisher Optimize your performance using Thermo Scientific KingFisher consumables designed specifically for use with the KingFisher Flex, Duo Prime, and Presto instruments. KingFisher instruments utilize disposable plastic plates and tip combs made of polypropylene, which are ideal for magnetic particle processing due to their low binding affinity for biomolecules. Both the yield and quality of the isolated protein or nucleic acid are significantly improved with special plates and tip combs designed for KingFisher systems. Orders more than $500 will be free shipping. SHIPPING: DHL Sea shipping for bulk orders
VWR 10"x10" 120 V Ceramic Hotplate Magnetic Stirrer- Model 97042-754 - Brand NEW VWR VWR Professional Hot Plate Stirrer Designed for applications requiring exceptional accuracy, stability, and repeatability, VWR�® Professional Hot Plate Stirrers are equipped with an exclusive safety system that helps protect both the operator and sample. Excellent temperature uniformity Digital display for temperature, speed, and time Cool touch, chemical-resistant housing Includes an RTD temperature probe kit Exclusive five-year warranty Available with a NIST Traceable, ISO/IEC 17025 Accredited Calibration Certificate from Troemner Industry Leading Safety Features 120V, 1550W, 12.9A 33W x 45.5L x 10.9H cm (13 x 1715/16 x 45/16") 25.4 x 25.4 cm (10 x 10") 6000 mL Ceramic 7.9 kg (17.4 lbs.) 97042-754 Speed stability + 2% Timer - 1 second to 160 hours Operating conditions - 5 to 40 C (41 to 104 F) Temperature Range 5 above ambient to 500 C (932 F) for ceramic top, 5 above ambient to 400 C (752 F) for aluminum top Speed range - 60 to 1600 rpm Temperature Stability - + 1%
Tecan QSP 10 ul filtered Tip for Tecan GENESIS Black, Conductive, Sterile Description Tecan 30000627. Disposable Tips 200ul, Black, Conductive, Sterile, non-filtered. Diet tip Liha. 96 tips/case. Robotic Pipette Tips are manufactured with 100% virgin polypropylene; in addition, the racks are designed to endure the applied pressures of automated workstation
SP Microcentrifuge Tubes 2.0 mL Natural Cardinal Health Description: Capacity 2.0mL High-clarity polypropylene Graduated in 0.25mL increments Withstand forces up to 30,000 x g Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
200 ul Small Micron First-Class Filter Tip Natural Sterile Molecular BioProducts Description: Molecular BioProducts low retention pipet tips are specifically designed for eliminating sample retention within the pipette tip All Pure tips are racked, pre-sterilized, and certified free of RNase, DNase, DNA, and pyrogen. The inner surface of the tip is extremely hydrophobic, reducing the loss of sample from adhesion to the tip interior. Tips are crystal clear to allow easy sample viewing
