The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. Product Description The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi ~ 20,000 psi 3. Nominal diameter: 2.1/16 "~ 4.1/16" (52mm ~ 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46C ~ 121C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 ~ 4 8. Performance level: PR1 ~ 2
Hydraulic Gate Valve Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. Product Description Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. API 6A Hydraulic Gate Valves are used primarily in the oil and gas industry for controlling the flow of fluids, such as crude oil and natural gas, in high-pressure and high-temperature environments. They are actuated using hydraulic systems, making them suitable for remote or automated operations. Features 1. The integral forging of the valve body, along with the use of carbide alloy on the sealing surface and seats, enhances wear resistance, and corrosion resistance, and extends the service life of the valve. 2. The metal-to-metal sealing between the gate and seat, seat and body, bonnet seal, and stem backseat provides a secure, long-lasting seal. 3. The balancing lower stem of the valve allows it to stay in position even in the absence of hydraulic power, and the double-acting actuator requires hydraulic power to both open and close. Should a failure of hydraulic power occur, this valve will remain in position. 4. Balancing stem that allows the gate to stay in position unless hydraulic power is supplied to the actuator to positively open or close valve 5. Two spring-loaded, pressure-energized, nonelastomeric lip seals provide low-pressure sealing and protect against particle intrusion, while the stem seal design is capable of handling a wide range of pressures, temperatures, and fluids. 6. Stem seal design that covers a wide range of pressures, temperatures, and fluids encountered in wellhead and manifolds service metal-to-metal bonnet seal. 7. A manual locking screw maintains the gate in the closed position without any operating pressure, and socket head cap screws are used to tie down the actuator head flanges, reducing exposure to corrosive environments.
Meivalve is a professional valve spare parts supplier and manufacturer that specializes in providing wholesale valve parts at competitive prices. Our extensive product catalog includes API 6A valve seat seals, peek seal rings, valve stem packing for FC gate valves, hammer union seals, valve stem U-packing seals, ring joint gaskets, and more. Our products are designed for the oil and gas industry, and we pride ourselves on delivering high-quality equipment and accessories to meet industry standards. With our commitment to quality and customer satisfaction, Meivalve is the go-to source for all your valve spare parts needs.
The choke manifold is a piping and valve arrangement with adjustable throttle valves. The assembly is primarily responsible for controlling flow and pressure in various industrial applications such as onshore and offshore oil well testing and production operations. Features 1. The choke manifold is the necessary device to implement well pressure control technology. It works on controlling the pressure, maintaining pressure balance inside the well and avoiding overflow and blowout; 2. To get too soft shut-in by choke valve pressure release, and to protect well mouth by open flow; 3. The choke line manufactured by our company conforms to the API 16C, NACE MR0175 Standards; 4. Special choke lines can be designed and made according to users' needs. 5. In case of malfunction of one chock valve, it is needed to close the upper and down valves and put the down valve of another chock valve into work; 6. When it needs open flow, it is necessary to open the flow valve and close the inlet valve of the drilling liquid-gas separator; 7. By means of the chocking effect of the check valve, the chock manifold can work on good control, replace the polluted drilling liquid, control the casing pressure and standpipe pressure of good mouth and recover the pressure on the well bottom caused by drilling liquid and curb overflow; 8. Pressure relief function of the check valve can be used to reduce the pressure of a good mouth and realize "soft shut in"; 10.Releasing liquid (gas) largely by a straight flow valve can reduce the casing pressure of a good mouth and protect the well mouth blowout preventer unit.
Ball screw gate valves are designed for large caliber, high-pressure manual valves. The valve combines the tail balance lever and the unique ball principle to make its operation light, low torque, and easy to operate. Its diameters range from 3 1/16 "to 9" and its pressures range from 10,000 psi to 20,000 psi. Product features: 1. Two-way downstream sealing structure, which improves the service life; 2. Fixed metal seal (between gate and seat and seat and body); 3. Simple and reliable gate and seat design can reduce field service; 4. Sealing ring between seat and body helps seal at low pressure. They also prevent granular contaminants from entering the body chamber and sealing area; 5. Stem seal design covers all pressure classes, temperature ranges, and all fluid conditions encountered in wellhead and manifold environments; 6. Metal seal between bonnet and valve body, up to 20000psi working pressure; 7. Reverse stem seal structure allows the valve to replace stem seal under pressure drive; 8. To ensure safety, a grease injection device can be placed on the stem after the inverted seal. The device can be placed on the bonnet to eliminate body leakage; 9.Ball screws can effectively improve the switching efficiency and reduce the switching torque, which is more conducive to opening and closing the valve easily and quickly. For more information, please visit our website.
2 ball valve, Teflon lined with: Pneumatic actuator Open close limit switch Pneumatic air regulator (QTY: 6, Condition, New in box)
(QTY: 6, Condition, New in box) 2 ball valve, Teflon lined with: 1. Pneumatic actuator 2. Open close limit switch 3. Pneumatic air regulator
Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. Features 1. The integral forging of the valve body, along with the use of carbide alloy on the sealing surface and seats, enhances wear resistance, and corrosion resistance, and extends the service life of the valve. 2. The metal-to-metal sealing between the gate and seat, seat and body, bonnet seal, and stem backseat provides a secure, long-lasting seal. 3. The balancing lower stem of the valve allows it to stay in position even in the absence of hydraulic power, and the double-acting actuator requires hydraulic power to both open and close. Should a failure of hydraulic power occur, this valve will remain in position. 4. Balancing stem that allows the gate to stay in position unless hydraulic power is supplied to the actuator to positively open or close valve 5. Two spring-loaded, pressure-energized, nonelastomeric lip seals provide low-pressure sealing and protect against particle intrusion, while the stem seal design is capable of handling a wide range of pressures, temperatures, and fluids. 6. Stem seal design that covers a wide range of pressures, temperatures, and fluids encountered in wellhead and manifolds service metal-to-metal bonnet seal. 7. A manual locking screw maintains the gate in the closed position without any operating pressure, and socket head cap screws are used to tie down the actuator head flanges, reducing exposure to corrosive environments. Technical Parameters 1. Medium: oil and gas accompanied by sour gas or/and sand 2. Hydraulic actuator: 3,000 psi working pressure and 1/2 NPT connection 3. Rated Working Pressure: 5,000psi 20,000psi 4. Bore Size: all popular 5. Temperature: K ~ U 6. Material Classes: EE ~ HH 7. End connections: flange 8. Product Specification Level: PSL1 ~ PSL3 9. Performance Requirement: PR1, PR2
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with domestic and foreign equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi 20,000 psi 3. Nominal diameter: 2.1/16 4.1/16 (52mm 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46 C 121 C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 4 8.Performance level: PR1 2
A Globe Control Valve is a type of linear motion valve primarily used to regulate fluid flow in pipelines. It consists of a movable disk (or plug) and a stationary ring seat in a globe-shaped body. By raising or lowering the plug, the valve controls the flow rate. Globe valves are versatile and suitable for various applications, including throttling and isolation services in industries such as oil and gas, chemical processing, and power generation. Their design allows for precise flow control, making them essential components in process control systems where accurate regulation of flow, pressure, or temperature is required. You'll be interested in China Manufacturers.
The Ball Control Valve manufactured by China Valve is a cutting-edge solution designed to precisely regulate the flow of fluids in various industrial processes. Known for its exceptional performance and reliability, the Ball Control Valve offers unmatched precision and control, making it an indispensable component in critical applications. The valve features a spherical closure mechanism, commonly known as a ball, which is strategically positioned within the valve body to control the flow of fluid. This design allows for smooth, unrestricted flow when the valve is fully open and tight shut-off when closed, ensuring optimal control over the process media. Constructed from high-quality materials such as stainless steel, carbon steel, or alloy steel, the Ball Control Valve is engineered to withstand extreme temperatures, pressures, and corrosive environments, making it suitable for a wide range of industries including oil and gas, petrochemical, chemical processing, water treatment, and more. China Valve employs state-of-the-art manufacturing techniques and rigorous quality control measures to ensure that each Ball Control Valve meets the highest standards of performance and durability. From precise machining to thorough testing, every valve undergoes meticulous inspection to guarantee reliability and consistency in operation. With its superior design, robust construction, and precise control capabilities, the Ball Control Valve from China Valve offers unparalleled performance and efficiency, making it the preferred choice for demanding industrial applications worldwide.
The Butterfly Control Valve crafted by China Valve represents a sophisticated solution for precise flow regulation in industrial settings. Renowned for its versatility and efficiency, this valve type is characterized by a streamlined disc, resembling a butterfly, which rotates within the valve body to control the flow of fluids. This innovative design allows for quick and precise modulation of flow rates, making the Butterfly Control Valve ideal for applications requiring rapid response and accurate flow control. Whether it's adjusting flow rates in HVAC systems, water treatment plants, or process industries like chemical and petrochemical, these valves excel in providing reliable performance. Manufactured using high-grade materials such as stainless steel, carbon steel, or exotic alloys, China Valve ensures that their Butterfly Control Valves withstand harsh operating conditions, including high pressures and temperatures, as well as corrosive environments. This robust construction guarantees longevity and operational reliability. China Valve employs advanced manufacturing techniques and stringent quality control measures to ensure that each Butterfly Control Valve meets international standards for performance and safety. From precision machining to comprehensive testing, every valve undergoes thorough inspection to uphold quality and consistency. The Butterfly Control Valve from China Valve is designed with user-friendly features, facilitating easy installation, operation, and maintenance. Its compact design and low weight make it a cost-effective solution without compromising on performance. With its precision control, robust construction, and reliability, the Butterfly Control Valve from China Valve is the preferred choice for industries seeking efficient flow regulation solutions. China Manufacturer Directory
Cast Iron Valves Etc.
Stabilizers, roller reamers, hole openers, lead collars, drill pipe float valves.
Quality used construction machinery and equipment. Industrial pipe fittings and valves.
Valves like globe valves, butterfly valves, gate valves.
Gas valves and parts, cylinders, pressure regulators gas bottle valves, gas hoses, Teflon tape.
High speed and low speed gear reducers heat exchangers valves pumps cable wire screeners refiners washer drums reactors.
Actuators, Pumps, Valves, Syringes, Solenoids.
Pipes and valves.
