We can supply, as much as you want, top quality and clean PET Flakes mix color (80% green, 20% mix color), hot washed, no caps, no labels, no residue, made in USA.
Price:
US$540.00 per metric ton FAS Port of Long Beach CA for minimum 4 X 40ft containers.
LDPE Mix Color Chunk/Purge and Regrind.
1x40ft HC container = 18 metric tons (Minimum) - Average 2 containers monthly available for shipment.
Melt flow = 0.602.
It's a hard scrap from a film line (Post-Industrial).
Pricing:
- US$325.00 per metric ton (Regrind) FAS Houston Port, TX (USA)
- US$225.00 per metric ton (Chunk/Purge) FAS Houston Port, TX (USA)
We specialize in supplying raw materials for ceramics and glass production, such as silica (quartz) sand-SiO2. We maintain a stable supply and can export to Southeast Asian countries particularly.
15859 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
MOQ: 10,000 Barrels per Month
Supply Ability: 1,000,000 Barrels per Month
JP54 Technical Specifications:
ADDITIVES
Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3
COMBUSTION PROPERTIES
Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM
COMPOSITION
Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952
VOLATILITY
Initial boiling point centigrade max report 123 D 96
10% vol at C 240
20% vol at C report
50% vol at C report
80% vol at C report
End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298
LOW TEMPERATURES PROPERTIES
freezing point centigrade max 40 15 D 1298
Corrosion copper (2hrs at 100 C)
Corrosion silver (4 hrs at 500C) max 1 227
STABILITY
Thermal stability control temp. 280C 323
Filter pressure, differential mm. Hg max 25
Tube deposit rating (visual) max <3
CONTAMINATION
Existent gum mg/100 ml max 7 131 D 361 Water reaction, interface rating max 16 258 D 1084 Fuel whit static dissipater additives min 75 D 3648 Fuel without static dissipater additives min 85
The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.
MOBILGEAR 600 XP 220 is extra high performance gear oil that has outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. MOBILGEAR 600 XP 220 is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughout. This increase in power density places increased demands on gear oils. MOBILGEAR 600 XP 220 is formulated to meet the stress by providing extra protection for gears.
Exxon S-150 - a liquid solvent used in many industrial applications such as fuel additives, paints and coatings, pesticide formulations, industrial cleaning, and process fluids.
Jet A-1 fuel is a kerosene-based aviation turbine fuel used in commercial and military aircraft. It has a minimum flash point of 38C and a maximum freezing point of -47C, ensuring safety and performance at high altitudes. It meets international standards like ASTM D1655 and DEF STAN 91-091, with additives to enhance stability, conductivity, and corrosion resistance.
EN590 diesel fuel is a low-sulfur automotive diesel that meets European standards for use in diesel engines. It has a cetane number of at least 51, a sulfur content below 10 ppm, and a flash point above 55C, ensuring efficient combustion and reduced emissions. EN590 complies with Euro 5 and Euro 6 regulations, optimizing fuel economy and engine performance while minimizing environmental impact.
D6 fuel oil, also known as Residual Fuel Oil or Bunker Fuel, is a heavy, high-viscosity petroleum product used primarily in industrial boilers, power plants, and large marine engines. It has a high sulfur content (up to 3.5%) and requires preheating for proper combustion due to its thick consistency. D6 is less refined than diesel and jet fuels, making it a low-cost, high-energy fuel suited for large-scale applications.
D2 diesel fuel is a mid-distillate petroleum product used in diesel engines, meeting ISO 8217 and ASTM D975 standards. It has a cetane number of at least 51, a sulfur content of up to 500 ppm (Low Sulfur) or 10 ppm (Ultra-Low Sulfur - ULSD), and a flash point above 52�°C, ensuring efficient combustion and reduced emissions. D2 is widely used in transportation, agriculture, and industrial applications due to its reliability and energy efficiency.
No less than 80% car and truck and no more than 20% industrial / fork lift batteries.
Used scrap lead acid batteries "wet" they are not drained. 10 plus containers available.
Prices subject to change with market conditions.
Input : 110V/220V, 47-63HZ
Specification : DC12V 6Amp
Constant Charging Voltage : 16.8V (4s li-ion battery)
Constant Charging Current :6A
Charging Mode : 3 Stages, CC, CV, Trickle
Material : Aluminum alloy with Fan
Dimension : 135*90*50mm
Net Weight :0.7kg
Application : Electric Vehicles & Tools
Various Protection : Over current , Over Voltage , Over Temperature , Short Circuit and Reverse Polarity.
Warranty: 12months
Products can be Customized!
15859 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
