EN 590 10 ppm. Must be able to do an MT 799 to BOF as well as an MT 103. 50,000 to 100,000 MT with possible R/E
PROCEDURE TANK TO TANK (TTT) with SGS DIP AND PAY 200k En590 Fob Rotterdam * 1. The buyer issue CIS on the buyer's company letterhead and Letter of acceptance stating to adhere to the seller's Transaction Procedure. along with TSA (TANK STORAGE AGREEMENT), the Buyer Certificate of incorporation, Company Profile (CP) and International Passport copy. After, the buyer Issue an ICPO. Containing the seller's work procedures and Banking Detailsâ?¨ * 2. The Seller issues commercial invoice of products in tank at port along with ICC warning * 3. The seller issues a copy of the SGS Report strictly to the buyer's Tank farm Company only to verify the SG Report. * 4. After confirmation of successful verification of SGS Report only by the Buyer's Tank Farm Company. The Buyer should send his Valid Tank Storage Receipt (TSR) for 10 days from his Tank Farm Company to the seller for verification. * 5. All parties must sign NCNDA and IMFPA for endorsements * 6.The sellers issues the following POP documents to the buyer; the buyer performs a Dip test on the product and makes payment for the total value of the product injected into the Tank via MT103-TT: SGS report for quality and quantity at shore tank not older than 48 hours * a. Product Certificate of Origin * b. Product injection report at shore tank * c. Tank storage receipt with full GPS coordinates * d. Unconditional dip test authorization letter * e. Authorization to sell and collect * f. NCNDA-IMFPA agreement * g. Q&A * * 7. The Seller sends payment of all intermediate involved in the transaction 24 hours after receiving confirmation of buyer payment as per signed & sealed NCNDA/IMFPA which is notarized by public Notary in the Netherlands and Authorized by the Seller's Bank and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement t between the buyer and the seller.
EN 590
D6
moisture - 1.39 vm - 1.23 ash - 10.12 fixed carbon - 87.40 sulfur- 0.77
Solar tile, which combines solar panels and roof tiles, integrates photovoltaic and architecture. Crystal silicon photovoltaic technology and building tile structure are innovated to eliminate the complex project of secondary installation and replace traditional cement tiles and clay tiles with one-time paving. Like solar panels, solar roof is designed to capture the energy from the sun that is shining on your roof and turn that energy into a usable power source for your home. Though different types of solar roofing products are available, they are all essentially mini solar panels designed to look like and function as conventional roofing materials. Solar roofing is made to resemble asphalt shingles or slate tiles while also producing electricity. All of the different types of solar roofing are known as building-integrated photovoltaics (BIPV). High performance Superior performance compared to similar BIPV products. Higher power generation per square foot compared to conventional solar modules. Seamlessly Integrated Design Serves the dual purpose of roof protection and power generation. Stylish hidden fastening system provides excellent aesthetics. Integrates with a wide range of fa�§ade structures and designs. Easy Installation Standardized modular design facilitates and simplifies the installation process.
We are pleased to offer a premium selection of coal with the specification: LOW CALLORIE : GCV AR 4200 5000 KCAL/KG MIDDLE CALLORIE : GCV AR 5000 6000 KCAL/KG HIGH CALLORIE : GCV AR 6000 KCAL/KG ABOVE ASH CONTENT: Max. 20 % TOTAL SULPHUR: BELOW 1 % VOLATILE MATTER: 38 45 % SIZE HGI: 0 100 mm 40 55 % Minimum order quantity is 30,000 MT - 50,000 MT Price
Cetane Number, min. Cetane Index, min. Density at 15�°C, kg/m' Polycyclic aromatic hydrocarbons, wt. %, max. Sulphur, wt. %, mg/kg, max, for fuel K5 Flash Point in closed cup, �°C, higher than CCR of 10 % residue, wt. %, max. Ash, wt. %, max. Water, wt. %, mg/kg, max. Total impurities, mg/kg, max. Copper corrosion test (3 hours at 50�°C), scale unit Oxidation stability: total residues, g/m', max Lubricating property: normalized wear scar diameter (wsd 1,4) at 60�°C, um, max. Kinematic viscosity at 40�°C, mm'/ Distillation: at 250�°C, vol.%, less than at 350�°C, vol.%, min. 95% (vol.) distilled at temperature, �°C, not higher than Cold filter plugging point, �°C, not higher than 51 8 10 55 460 360 Specified Value TU 38.101567-2014 11.4 61 minus 10 1.0 (Il type) 1.5 (III type) 0.025 traces 0.2 absence 0.01 0.02 890 20 Specified value GOST 32511-2013 (EH 590:2009) 51.0 46.0 820.0 - 845.0 8.0 10.0 55 0.3 0.01 200 24 Class 1 25 460 2.000 - 4.500 65 85 360 minus 5
Total Moisture (ARB). 6.7% Ash (ADB) 12.1% Total Sulfur (ADB) .7% Volatile Matter (DAF ADB). 30% Gross Calorific Value (ARB) 6800 kcal/kg FSI (Free Swelling Index). 7
COAL for sale. We have both steam coal and anthracite coal. Container quantities and bulk quantities available. Please advise your spec needed for quotation and quantity. Small quantities acceptable also.
We are interested to Sell 35.000 mt Coal T1 FOB . LP Maracaibo Lake, El Bajo anchorage, Venezuela. Payment 100% Cash against documents Steam coal: Coal burned, primarily in boilers, to generate steam for the production of electricity or for process heating purposes, or used as a direct source of process heat. Steam coal, also known as thermal coal. FOB Only and Buyer need to arrange Shipping ULTIMATE ANALYSIS Total Moisture,% 7.50 Carbon: 71.50 Hydrogen: 4.80 Nitrogen : 1.30 Total Sulphur, 0.70% Ash,% 6.00 Oxygen (By Diff.) 8.20
Biomass Briquette Machine
Our company owns petroleum green coke from venezuela for sale. CAD payment method. immediate availability.
From Middle East, CIF Singapore, EN590 10 ppm $750/MT. This price was for April, subject to confirmation.
Coal
The wood pallet block production line uses sawdust, shavings, straw, and other waste materials as raw materials. After crushing, drying, and mixing glue, it is heated and pressurized by a sawdust brick making machine to produce pallet foot blocks. The wooden pallet block formed by high temperature and high pressure has a smooth and flat appearance, high hardness and favorable price. It is an ideal product for making wooden pallet feet. The size of the wood briquette making machine can be customized according to customer needs, and the pressure and density of the woodblock can also be adjusted.
Fuel Grade Petcoke Specification (Typical) Elements, Unit Value Dry Basis Hydrogen - 4.5 Nitrogen -
The wood briquette machine can use many raw materials, including sawdust, corn stalks, soybean stalks, sorghum stalks, and other crop stalks, rice husks, grasses, branches, coconut shells, bamboo chips, etc. Almost all wood waste and farmland straw can be used to process sawdust briquettes.
Specifications: a) In the material received in the laboratory: Moisture: % mass : 10% a1) Density: 650kg/m³ in the dry material b) Fixed Carbon - %mass - 16.4% c) Ash - %mass - 1.1% d) Total sulfur - %mass - Higher 19.5 MJ/kg // Lower 18.2 MJ/kg Note: MJ/kg = 238.8 kcal/kg
Brand Name Shisha Hookah Coconut Shell Charcoal Briquettes premium Material 100 Indonesian Finest Coconut Shell Usage Shisha Hookah Type Machine Made Charcoal Calory 7,200 kcal kg Ash Content 3 Features Organic Materials, High Calories, Environmentally Friendly, Long Time Burning, Smokeless, Odorless, Hard to Break, No Chemical, Smooth Surface, Good Cutting Size 25 25 25mm 22 22 22mm 25 25 15mm Minimum Order Qty 17Tons 20ftContainer
