D2 Gasoil Gost 305-82
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude, and can be used without reformers and additives.
This is gas oil that is the second distillate that is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is GOST 305-82 and it is the presentation of this to the market that has helped in a major reduction in pollution in many cities.
GOST 305-82
GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.
The GOST variant for D2/Gasoil is GOST 305-82 and specifies now a sulphur content of 0.02 MAX which is according to the ISO standard.
Specifications for Gasoil D2 L-0.02/62 / GOST 305-82
Cetane index, min 45Distillation, degrees C 50% max 280Distillation, degrees C 99% (final biling point) max 360Kinematic viscosity at 20 Deg C, mm2/c (cst) 3.0 to 6.0Sulphur, max % 0.02Hydrogen Sulphide AbsCopper Strip Test PassesWater Soluble Acids and Alkalis AbsActual gum content, mg/100cm3, max 40Acidity, mg/100cm3 of gasoil, max 5Iodine number, g/100g, max 6Ash, % max 0.01Cokability of 10% residue, max. 0.20Filtration Coefficient, max. 3Sediments AbsWater AbsDensity at 20 Deg C, kg/m3, max 0.86
This is gas oil that is the second distillate that is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is GOST 305-82 and it is the presentation of this to the market that has helped in a major reduction in pollution in many cities.
GOST 305-82
GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.
Standard diesel fuel (sometimes called diesel oil) comes in two grades:Diesel #1 (or 1-D) and Diesel #2 (or 2-D).
Diesel fuel also is measured by its viscosity. Like any oil, diesel fuel gets thicker and cloudier at lower temperatures. Under extreme conditions, it can become a gel and refuse to flow at all. Diesel #1 flows more easily than Diesel #2, so itâ??s more efficient at lower temperatures.
The two types of oil can be blended, and most service stations offer diesel fuel blended for local weather conditions.
While D2 is also known as #2 Diesel, Russian Federation and Belarus refineries never use the name D2.
They use operation terms like Gasoil 0.2, Gasoil 0.1, ULSD/50-10 ppm/EN590 (EN590 means that standard of the quality of the product according EU regulation EN590.
1. Buyer issues ICO and Company Registration Certificate to Seller with Buyer's Passport
�¡�¾�?�?.
2. Seller issues Cl to Buyer for the available quantity. Buyer signs and returns the CI to Seller.
3. Buyer issue POF via MT199 with they're bank funds for blocking order quantity.
4. Seller releases the SGS and POP document, Buyer do their own check SGS.
5. After the successful SGS check, Buyer makes 100% payment via TT/MT103 for the total product value to Seller and Seller transfers the Title Ownership to Buyer. and Buyer pay for TSR till transfer buyer to vessel.
6. Buyer Provide its nominated Vessel CPA, Q88 alongside with Safety Management Certificate of the Ship and lifting commences.
7. Seller submits the Draft SPA to Buyer for R & E monthly deliveries.
8. Buyer reviews and signs the SPA and issues SBLC MT760 or DLC MT700 for the length of the contract or for each lift preschedule. Buyer pays by MT103/TT after Dip Test on each month's delivery. The subsequent deliveries will commence according to the terms and conditions of the contract.
Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil. The "10 PPM" designation refers to the maximum allowable sulfur content in the fuel, which is 10 parts per million (ppm) or less. Here are some of the specifications for Diesel EN590 10 PPM:
- Density at 15 C: 820-845 kg/m
- Flash point: minimum 55 C
- Cetane number: minimum 51
- Sulfur content: maximum 10 ppm
- Distillation range: 90% distilled at 360-370 C
- Cold filter plugging point: maximum -5 C
- Appearance: Clear and bright, free from visible sediment and water
Diesel EN590 10 PPM is primarily used as a fuel for diesel engines in automobiles, trucks, buses, and other vehicles. It is designed to meet the stringent emissions standards in Europe and other regions, which require lower levels of sulfur and other pollutants in diesel fuel. The use of low-sulfur diesel fuels like EN590 10 PPM can help to reduce air pollution and improve air quality, as well as reduce the emissions of greenhouse gases.
We are a Refinery Mandate Direct supplier. We focus on A1 Jet Fuel, EN 590, D2, D6, and accept customer orders for other inventory. We provide preferred direct pricing with no broker chains and full management of the transaction from RFQ to final delivery. We have reasonable procedures with possible minor changes for existing clients.
Refinery requires a formal RFQ from buyer on company letterhead before they will issue an SCO or LOI.
We ECOLOGICAL SYSTEMS LLC are mandate company to various refineries of Russian product and Non-Russian product .we wish to inform your company
that at the moment we have available EN590,PETCOKE Light cycle oil on vessel tankers in asia sea for tanker take over (TTO) for any serious buyer .kindly revert if you or your buyers are interested for more details thank you.
Product 6 D6 Virgin Fuel Oil GOST R Origin Russian Federation Specification International export Standard Trial Shipment quantity 50,000,000 gallons (+/- 5%) Monthly Shipment Quantity 100,000,000 gallons x 12 Months with possible roll & extension Price US$ 0.48/US$0.46 per gallon Payment SBLC MT760/DLC MT700/MT103 Packing By Bulk Inspection SGS, or Similar By Seller Delivery CIF Any Safe World Port (ASWP) Loading port Novorossiysk, Nakhodka, Ust-Luga Port Russia Insurance 110% by Seller Performance Bond 2% PB in favour of Buyer
Euro 2m diesel - $850 cif aswp / $826 fob perai, penang, malaysia.
For sale 15, 000mt to max 30, 000 mt of "euro 2m" diesel fob malaysia ci dta dip and pay within 24 hours at the price of $826 or cif with site lc to pay after sgs dip with cpa and q88 invoice from the shipping company before loading at the price of $850 per mt. Can do a monthly contract or a spot or rolling spot for 12 months
