British Power Conditioning Equipments Suppliers and Manufacturers

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Covidien ABSTACK30 Absorbatack Fixation Device Part # ABSTACK30 Exp 3/19 Covidien ABSTACK30 Absorbatack Fixation Device is an absorbable tack fixation device, for use in laparoscopic hernia repair. The NEW AbsorbaTack (ABSTACK30X) fixation device for laparoscopic hernia repair continues to deploy tacks when the shaft is flexed over 3 cm. Covidien ABSTACK30 Absorbatack Fixation Device Features Designed with patient comfort in mind No metal required for fixation Supports a minimally invasive approach through 5 mm shaft and easy-to-use design Fixation strength Provides strong temporary mesh fixation, with retention strength comparable to the â??gold standardâ?? ProTackâ?¢ fixation device at 1 week and 2 months in an animal model1 Peace of mind Reduces the likelihood of inadvertent needle sticks in the OR, since no sharp piloting needles are required for deployment Potentially fewer visceral attachments than permanent tack fixation1 Violet tack with black-dot visualization feature to optimize visibility In Perfect sealed condition but past expiration date. Not for human use in the US. Expiration dates have mostly to do with sterilization and not the integrity of the product. The manufacturers sterilize the products after they are packaged and it lasts so many years. The only products we caution customers about are ones that are absorbable or drug coated.

Fresinius FX60 High Flux Dialyzer is produced to meet international safety regulations. Fresinius FX60 High Flux Dialyzer can be used single time.

this is use for gastrpoic procedure Olympus GIF-H170 Gastroscope in excellent condition

The outpatient surgical imaging platform CV-170 enables cost-effective access to the power of HDTV and NBI in endoscopic diagnosis in ENT and urology.

- Ethicon Echelon 60 Endopath Stapler Reload - Blue 6 Rows Reload For Endopath60 Stapler 60mm 3.5mm - Echelon60 - Blue 3.5mm, 6 Rows

Echelon Endopath Staplers with gray, white, blue, gold, and green reloads deliver six staggered rows of staples with a single cut line in-between. A safety lock-out feature in the Ethicon reloads is designed to prevent a used reload from being re-fired. A staple retaining cap on the Echelon reload, protects the staple leg points during shipping and transportation. All Echelon Endopath Cartridges are compatible only within the Echelon Endopath Family of Staplers. Wide range of cartridges: Accommodates various tissue thicknesses, all with 6-row stapling capability. All cartridges fit through a 12mm trocar. Endoscopic Linear Cutter Reloads

Long Articulating Endoscopic Linear Cutter Articulating Shaft 60mm Staple Line For use with any ECHELON60 Reload

Gripping Surface Technology Bariatric Surgery cartridges The Echelon+ Stapler advances security to deliver fewer leaks at the staple line and better staple formation, even in challenging conditions.

Circular Stapler, 31 mm Size, Green, Titanium (Staples), Circular, 22 or 35 cm Shaft Length, Squeeze Handle, DST Series Staple Technology, Tilt-Top Anvil Stapler, 4.8 mm Open Height, Single-Use, Sterile

BOSTON SCIENTIFIC 109681 AngioJet Solent Omni Over-The-Wire Power Pulse Enabled Thrombectomy Set, 120cm x 6F (X) ***EXPIRED 2018-07-31*** All items listed are on inventory. When the item is expired must be used for educational, training, veterinary or non-clinical research purposes only. Reasonable offers considered. International shipping requires a quote. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." IF YOU WANT TO PURCHASE THIS ITEM THEN CLICK BUY NOW YOU DO NOT NEED A PAYPAL ACCOUNT TO MAKE PAYMENT AT All items listed are on inventory.

Bariatric Surgery cartridges The Echelon+ Stapler advances security to deliver fewer leaks at the staple line and better staple formation, even in challenging conditions.

Fresenius fx 60 classic dialyzer available for sale wholesale and best prices available