Wear and corrosion resistance. Argon arc welding of copper alloys and brazing of steel Chemical Composition : Al: 8, Cu: Rem, Al: 10, Fe: 1.5, Cu: Rem, Al: 10.5, Fe: 3, Cu: Rem
Argon arc welding of copper alloys and MIG brazing of steel. Chemical Composition : Si: 3, Mn: 1, Cu: Rem
Yes,our fridge compressor scrap is sealed and high quality, oil drained, copper winding inside with connection box.Details of fridge Compressor Scrap and specifications: 220-240V/50 or 60HZ Cooling capacity:90-190W Displ.: 5.99-12.53cm3 High efficiency Types: Danfoss, National, Asepera,Embraco and Ireland. We packed 24 Metric Ton into 20Fit container and 38 Metric Ton into 40Fit container at the Loading Port.
Used Rails R50-R65 Transaction Procedures: 1. Annual contract: 30.000 MT/Month Minimum, Maximum 300,000 MT/Month 2. Buyer issues LOI 3. Buyer confirms soft offer and issues ICPO with right to soft probe addressed to the Seller. 4. Seller issues FCO to Buyer. 5. Buyer signs FCO and returns to Seller with letter of approval. 6. Buyer issues draft contract open amendments. 7. Seller and Buyer exchange legalized and registered contract through courier and lodge contract in respective Banks. 8. SellerÆs Bank issues Proof of Product (POP) via Swift to BuyerÆs Bank to include the following documents listed bellow. 9. BuyerÆs Bank issues Irrevocable, Transferable Documentary Letter of Credit, SellerÆs Bank replies with a 2% Performance Bond to Buyer and the assignee names by means of prime 50 first world ranking banks guarantee Model ICC 458 acceptable in written by Buyer and if the Seller fail to supply the cargo of the product this 2% will be paid to Buyer. 10. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 11. Buyer Shipment commences as per contract. Buyer release payment to the Seller. Shipment Delivery per shipping schedule program via Swift Fund Transfer 100% payable at sight against shipping documents. As mutually agreed
Metal scraps. 20ft Containers.
HMS 1 and 2 scraps 1. 300 MT HMS 1 & 2 ( 80:20) in containers. 2. 1000 MT Used Rails in bulk or containers we have them ready for shipping any time negotiations are being met. Below is our company's quotation of the products you HMS 1&2 80/20 Chemical composition shall fully be ISRI (Institute of Scrap Recycling Industries)compliant 200, 201,202,203,204,205,206. Origin: Uk,Ireland packing: Bulk {Containers}Discharge Rate: Metric Tons Destination Port: Buyers Port of Recivance Location: United Kingdom Port Of Shipment: Port Of Southampton. Packaging: According to Rains Specification STATUS: Customer Satisfaction is Guaranteed Price 300usd per mt CIF included Asia Europe America Available stock:50000mt Monthly Order:2000-7000 mt minimum order: 100mt (240ft containers)
Fridge compressor scraps : usd 190.00/mt. Cnf included asia , europe America ports Origin:usa , uk, germany(danfoss)aspera and ireland. Quantity available: 80, 000/mt Monthly supply ability: 1, 000 - 6, 500mt per month. Packaging: according to isri specification in containers Inspection:sgs Status:isri compliant Weight 4kg, 5kg, 6kg, 11kg, 12k5 4kg 5kg 6kg comes with aluminium strippings In container
Metal scrap.
HMS1 Payment: Unconditional SBLC, Delivery: 25-45 days Lead time Packaging: Break Bulk/Vessel Performance Bond: 2% Origin: UK Loading Port: Felixstowe, UK Inspection: SGS/CCIC or Equivalents. Proceedure: 1.BUYER issue LOI + BCL (MT 799) 2.Seller issue FCO 3.Buyer signs the FCO and sends it to the Seller 4.Seller issues Draft Contract. 5.Buyer signs the Draft contract and sends it to the seller. 6.Seller sends hard copies to buyer by courier. 7.Buyer's Bank opens Transferable SBLC / Transferable LC for seller as agreed by seller's Bank. Buyer uses US, Western Europe or Hong Kong Prime Banks for confirmation. 8.Seller sends site visit invitation. 9.Upon receiving the agreed SBLC, seller activates 2 % Performance Bond. 10.Seller checks quantity and quality with SGS at loading port. 11.At the buyer's request, the seller will allow the buyer or his representative to be present at loading port. 12.Seller begins shipments. Specifications: isri-codes: hms 1 isri200-202 Physical Analysis: No. 1 heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. 201 No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI 202 No. 1 heavy melting steel 5 feet x 18 202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 203 No. 2 heavy melting steel. Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging. 204 No. 2 heavy melting steel. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared.205 No. 2 heavy melting steel 3 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. 206 No. 2 heavy melting steel 5 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 60 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. Contains no harmful agents, wooden particles, Shell or any other explosive agents Above is the requested Draft Offer for HMS 1. Buyer is required to send LOI in order to proceed under normal business terms. Chemical composition used rails: C:0,54-0,82 SI.:0,18-0,40 Mn:0,60-1,05 S:0.04 max P.:0,035 max As.:0,01 max of mass share Norms: R-50 gost-7173-75 and r-65 gost-8165-75
Specifications of used rail scrap ( r-45 to r-65): Chemical specifications for scrap railway track metal: -1. Caduim cd :0.0006% 2. Chromium cr :0.6205% 3. Copper cu :0.2507% 4. Cobalt co :0.0046% 5. Lead pb :0.0149% 6. Molybdenum mo :0.003% 7. Nickel ni :0.141% 8. Tin sn :0.001% 9. Silver ag :0.0005% 10. Zinc zn :0.349% 11. Iron fe :75.21% 12. Carbon :0.04 % (maximum) rejection at 0.06% Impurities :23.33% (calculation) total 76.668% The following traces of elements should be avoided & should not be there:. Carbon :0.65 - 0.75% (in the railway track) Manganese :0.65 - 0.80% Sulphur :0.06% max. Phosphorus :0.035% Ash :0.01 max mass share
HMS1&2 (80:20) and HMS1 (100%) Steel scraps shall be considered free of alloys when the residual alloying elements do not exceed the following percentages: percent Nickel 0.45 Chromium 0.20 Molybdenum 0.10 Manganese 1.65 The combined residuals other than manganese shall not exceed a total of 0.60 percent. ISRI-CODES: 200 No. 1 heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. 201 No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 203 No. 2 heavy melting steel.* Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging. 204 No. 2 heavy melting steel.* Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared. 205 No. 2 heavy melting steel 3 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. 206 No. 2 heavy melting steel 5 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 60 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material.
HMS 1&2 ISRI 201-206 Containerised
HMS 1 and 2 MT : 5000mt in break bulk
Oleoresins, essential oils, fragrance oils, herbal oils, floral extracts, food colourings, sunflower oil, coconut oil, mustard oil, peanut oil, vegetable oils, coconut water, sugar, spices, pulses, rice (basmati & non basmati), tea, ethanol, milk powder, healthcare products, medical clothing, disposable nitrile gloves, latex gloves, diapers, wet wipes, a4 paper, paper goods, hotel supplies, restaurant supplies, janitorial supplies, aluminum foils, cling films, disposable cups, food containers, straws, towels (hand / beach / bath towels).
980000MT Negotiable based on quantity and payment terms Purity 9999 Origin China Manufactured and supplied Stock Location Tianjin Port Ready for export or warehouse pickup Shipping Terms FOB Tianjin Port CIF upon request Minimum Order Quantity MOQ 5001000 MT Trial order available Maximum Monthly Capacity 400000500000 MT Contract Terms 3year contract Renewable up to 10 years upon performance Payment Terms 10 advance payment 90 LC Letter of Credit at sight Option for 100 LC is negotiable depending on buyer details and supplier approval SGS quality and quantity certificates will be provided at the loading port Key Features ISO certification available SGS testing reports and confirmation letters can be provided prior to contract signing Product specifications meet buyer requirements size 1000mm x 1000mm thickness 10mm Flexible shipping to global ports eg Turkey Georgia CIS countries Process to Start 1 Buyer submits LOI Letter of Intent with specific requirements 2 Supplier provides FCO Full Corporate Offer detailing terms and conditions 3 Buyer issues ICPO Irrevocable Corporate Purchase Order 4 Both parties sign SPA Sales and Purchase Agreement 5 SGS inspection conducted at the loading port 6 Buyer completes payment as per agreed terms
Copper Cathodes 760000MT Negotiable Purity 9999 Origin China Manufactured and supplied directly by Chinese factories Stock Location Nansha Port Canton Ready for export or warehouse pickup Shipping Terms FOB Nansha Port Insurance and freight are buyers responsibility CIF pricing negotiable upon request Minimum Order Quantity MOQ 500 MT Trial order Maximum Monthly Capacity 5000 MT per month Contract Terms 1214 months Renewable Payment Terms Irrevocable DLC Documentary Letter of Credit or other negotiated payment terms Seller may require NCNDA NonCircumvention NonDisclosure Agreement before proceeding to FCO Full Corporate Offer Process to Start 1 Buyer submits LOI Letter of Intent including specific requirements 2 Seller provides FCO detailing terms and conditions 3 Buyer issues ICPO Irrevocable Corporate Purchase Order 4 Both parties sign SPA Sales and Purchase Agreement 5 Buyer opens DLC within 5 working days
DRCOrigin Copper Cathodes Purity 99959999 Origin Democratic Republic of Congo DRC Stock Location Zambia Ready for export Shipping Terms CIF at 7600ton flexible terms no upfront payment required Minimum Order Quantity MOQ 300 MT for trial shipment scalable to 100000 MTmonth under a 12month contract Monthly Capacity Up to 100000 MT Certificates Comprehensive documentation provided including COA Certificate of Analysis BL Bill of Lading SGS inspection reports and all necessary certifications for compliance Payment Terms DLC Documentary Letter of Credit MT700 no upfront payment The seller provides a 2 Performance Bond PB for the trial shipment Process to Start Buyer provides an LOI Letter of Intent which is followed by Seller issuing an FCO Full Corporate Offer Buyer sending ICPO Irrevocable Corporate Purchase Order Seller and buyer signing an SPA Sales and Purchase Agreement Buyer opens a Letter of Credit within 5 working days Preferred Buyers This supplier is ideal for serious buyers with highvolume needs outside of China They prioritise buyers requiring flexible longterm contracts with CIF shipping and transparent banking processes Ideal For Buyers in India UAE Europe or other global markets who value highquality copper cathodes reliable documentation and zero upfront payment commitments Perfect for buyers seeking largescale supply solutions with stringent quality controls
IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI
Iron Ore, Manganese Ore,Chrome Ore, Iron Ore Lumps, Iron Ore Fines, Mill Scales, Copper Ore, Lead Ore. We sell iron ore, iron ore fines, iron ore lumps, hematite iron ore, magnetite iron ore with vairous grades, if you have such demand, pls feel free to contact us. Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Almost all (98%) iron ore is used in steelmaking. Iron ore is mined in about 50 countries. The seven largest of these producing countries account for about three-quarters of total world production. Australia and Brazil together dominate the world's iron ore exports, each having about one-third of total exports
Aluminum Ingots /Aluminum ingot A7 99.7% and A8 99.8% /aluminium alloy ingot We are exclusively engaged with our expertise in offering a wide range of Aluminum Ingot. These Ingots are manufactured using the essential quality basic material. Our Ingots are well acknowledged for their enhanced durability. Offered completely manufactured Ingots are available in miscellaneous sizes at a very competitive price. Provided Ingots are checked as per the set parameters of the industry, before final dispatch. Features: â?¢ Durability â?¢ Sturdiness â?¢ Optimally finished Additional Information: Item Code: AI-01 Appearance : Silvery white Length : 740MM (+/- 10%) Width : 170MM (+/- 10%) Thickness : 90MM (+/- 10%) weight of one ingot : 25KG (22-25 KG) Quality : AL 99.70, AL 99.50, AL 99.00 Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your recquirment
