Powering Your Boat from 115 H.O. to 300 HP
E-TEC G2
Best In Class fuel economy
E-TEC Direct Injection Fuel Technology
V6 from 150 H.O. to 300 HP
Power Steering
Available in white or gray, plus color panels
Engine
Engine Type V6 66 E-TEC G2 D.I.
Bore 3.39 in (86 mm)
Stroke 3.10 in (78.7 mm)
Displacement 167 Cu in (2.7 cc)
Throttle 5000-6000 RPM
Gear Ratio (Primary) 2.17:1
Steering Tie Bar/Remote
Electric
Starter Electric
Alternator 133 Amps Total / 50 net Dedicated / 14 amps @ idle
Fuel System
Fuel System E-TEC Direct Injection with stratified low RPM combustion mode
Dimensions
Length Shaft: 25 in (635 mm)
Weights
Weight 512 lbs (233 kg)
Features
Features Controls: Slate Gray
Deck screws are screws specifically designed for use in outdoor decking projects. They are usually corrosion-resistant to withstand exposure to the elements. The "inch" specification likely refers to the length of the screws.
The CPI -1519 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases
These compressor lubricants feature excellent protection against hydrogen sulphide (H2S) within the gas stream.
Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval.
The CPI-1519 Series are specifically advantageous in high-temperature applications, particularly as the low
volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long,
trouble-free and uninterrupted service intervals.
Applications and Compressor Type
Flooded rotary screw compressors
Centrifugal compressors
Liquid ring vacuum pumps
Features and Benefits
Hydrocarbon insoluble Insignifi cant dilution in operation
Corrosion protection (H2S) Resistance against H2S corrosion
Oxidatively stable Longer system life
Extremely low volatility Reduced maintenance, reduced top-up
Excellent lubricity Increased efficiency, reduced cost of operation
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment,
as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced downtime
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package.
These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants.
The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant.
Applications and Compressor Type
Propylene Refrigeration
Oil-flooded rotary screw compressors
Liquid ring vacuum pumps
Other applications requiring an oxidative and thermally resistant lubricant
Features and Benefits
Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems
Oxidatively stable Longer system life
Low volatility Reduced maintenance, reduced top-up
High viscosity index Wide temperature range of operation
Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1516 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to ensure shear stability, corrosion protection, and excellent lubricity.
These compressor lubricants feature excellent protection against yellow metal staining by careful selection of a combination of corrosion inhibitors. This, coupled with unparalleled oxidative and thermal stability ensures that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval.
The CPI -1516 Series are specifically advantageous in high-temperature applications, particularly as the low
volatility and high viscosity index means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval.
Applications and Compressor Type
Flooded rotary screw compressors
Propane refridgeration
Features and Benefits
Corrosion protection (yellow metals) Enhanced system reliability and reduced down-time
Oxidatively stable Longer system life
Extremely low volatility Reduced maintenance, reduced top-up
Excellent lubricity Increased effi ciency, reduced cost of operation
High viscosity index Satisfactory use over wide range of operational temperatures
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases.
These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity
compared to other types of lubricants.
The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation.
Applications and Compressor Type
Flooded rotary screw compressors
Sour gas applications
Heavy hydrocarbon gas stream applications
Features and Benefits
Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation
Corrosion protection (H2S) Resistance against H2S corrosion
Oxidatively stable Longer system life
High viscosity index Small viscosity changes over wide temperature ranges
Trustex gloves are premium nitrile gloves that are perfect for various applications. With their superior durability, Trustex nitrile gloves provide excellent hand protection without compromising on comfort.
Trustex gloves provide exceptional protection and dexterity, with textured fingertips for added grip. Crafted from premium nitrile material, these gloves are latex-free, which reduces the risk of allergies and irritation. They are also powder-free, eliminating the mess and discomfort associated with traditional powdered gloves.
Suitable for industrial work, food handling, or general-purpose use. Trustex disposable nitrile gloves are trusted for reliable performance, quality, and peace of mind. Available in three sizes: small, medium, and large.
Suitable for a variety of minimal risk activities including but not limited to: Cleaning, Beauty Therpay, Parts Handling, Painting and Finishing Services, Food Preparation, Tattoo Care, Pet Care, Child Care, Technicians, Mechanic, Hair Dressing
Features Include:
Latex-Free
Powder-Free
Chemical Resistant Nitrile
Fingertip Textured and Beaded Cuff
Reduces risk of allergy
Tough & Flexible (Quality & Strength)
Good resistance
Food Safe
Non-Sterile
Single-use ambidextrous gloves
Trustex Nitrile Gloves are also tested according to ISO 21420:2020 and Cat 1 according to: PPER (EU) 2016/425
Trustx gloves meet AQL 1.5 as per EN455 and ASTM prescribed standards
Manufactured by Karex, the world's largest condom manufacturer
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available
Types of Plywood:
Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing.
Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures.
Tropical Plywood: Best for marine construction and exterior furniture.
Flexible Plywood: Great for curved surfaces and architectural elements.
Marine Plywood: Built for boat building and outdoor structures.
Fire-Retardant Plywood: Essential for safety-critical applications in public buildings.
Grades Available:
A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture.
B-Grade: Solid surface with few knots, suitable for furniture and shelving.
C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important.
D-Grade: More knots and defects, great for construction and underlayment.
Specifications:
Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm
Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request
Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use
Face Veneer: Available in smooth or textured finishes, depending on grade and type
Applications:
Construction: Ideal for walls, roofs, and flooring.
Furniture: Perfect for creating tables, chairs, and cabinets.
Cabinetry: Suitable for kitchen units, wardrobes, and shelving.
Marine Use: Excellent for boat building, docks, and piers.
Decorative: Great for wall paneling, partitions, and ceiling panels.
291 Marine Paint Suppliers
Short on time? Let Marine Paint sellers contact you.
