Paper.
Paper bags.
Paper bags.
Rubber products, plastics, cardboards.
Papers for laser printing, photocopiers, & facsimiles & packaging.
Paper cups.
Photo copy paper, tea, fresh vegetable, pulses, lentils.
Manufactured by addition of acid to a native starch slurry, this popular textile starch has low and uniform viscosity, which allows it to withstand high temperatures and to be used in higher concentrations. This starch may also be used in paper manufacturing for sizing and strength. Our sales team can guide you towards finding the best specifications for this purpose. -Brightness- Min 90% -Cold water solubility Max 4% -Ash Content Max 1%
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Spray starch derived from either maize or tapioca is applied by means of spraying and is used primarily in the production of paper, boards, and ply. This modified starch: - Increases the strength of ply bonds in boards and plywood. - Increases the bending and spring back tendency of boards. - Reduces the de-lamination of plywood and laminated boards. Parameter: -Appearance- fine free flowing white powder -Viscosity in Brookfield Viscometer -Min 2000 cps -Moisture Content- Max 13.0% -pH of 10% slurry- 6.0 - 8.0 -Ash Content- Max 1.0% -Brightness -Min 85.0% Cold water Solubility Max 4.0%
Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Produced by the hydrolysis of corn-starch, through an eco-friendly process, our white dextrin has a wide range of applications: - Can be used at higher solids levels than native or modified starches - To create stronger bonds - Have more tack - Dry faster than pastes made from unmodified starch - Is soluble in water Dextrin pastes provide excellent machinability and can be used in: - Adhesives and coatings that come into contact with food products - Child-safe school pastes - Removable wallpaper - Bag/envelope seams - Paper and textile sizing. Parameters: -Appearance- Off white free flowing powder -pH of 10% Slurry -2.5 - 3.5 -Moisture -Max 10% -Ash content -Max 1% -Free acidity- Max 5ml -Cold water solubility -Min 85%
Our A grade maize starch meets the highest standards and is a versatile product that can be applied across a variety of industries such as: Textiles (sizing, finishing, printing) Paper and cardboard Glues and Adhesives Rubber and foam Paint fillers and putty Cosmetics Detergents Aluminium and Cast-Iron Foundries Fireworks Dry battery cell This multifunctional product can be modified to your needs and our sales team would be more than happy to help you find the starch that fits your industrial requirements. -Parameters : -Appearance-Free Flowing Cream-White Powder -pH of 10%- Slurry 4.5 - 7.0 -Moisture Content- Max 13.0% -Viscosity of 5% solution in Brookfield viscometer at 75C- Min 1400 Cps -Viscosity of 2% solution in RedWood No.1 viscometer at 75C -Min 34 sec -Fibre Content(100gram) -Max 1.0 ml -Sieve retention on 100 mesh -Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 100 ppm -Brightness -Max 90.0% -Protein Content Max 0.45% -Free Acidity (10 gram)- Max 4.0 ml -Petroleum Extractable Matter- Max 0.25% -Acid Insoluble Ask- Max 0.05% -Alcoholic Acidity @90% Alcohol- Max 2.0 ml -Starch content- Min 98.0%
News paper, yellow pages, UPVC scrap.
A J Services manufacture a selection of a volume control dampers or VCD which have been designed for fitting to the ducting in HVAC systems. Volume control damper help to regulate the air velocity which flows through the ducting which has been connected to a heating, ventilation and air conditioning system being able to regulate the volume of air passing through the ducting means that the rooms or space where the air is distributed will reach desired temperature faster. This means that less energy is used, which will ultimately mean lower energy bills. The dampers are manufactured in a variety of styles depending on the application they will be used within. With options for ducts with both high and low velocities, can be provided in a large number of sizes starting at 50mm with the largest going up to 2000mm. Because ducting changes shape depending on the system it is being implemented in the dampers which are provided reflect this and circular, oval, rectangular and square choices are available, with dampers being produced in galvanised, stainless 304/316 and aluminium. For the larger VCD in the rectangular dampers the blades can appear both in and out of the air stream, however because of the rectangular casing surrounding the larger circular VCD the blades will appear out of stream. These VCD are connected to the ducting via a spigot, so are slotted directly onto the ducting. For the smaller more specialised dampers such as single blade, constant volume and butterfly shutter the blades are most typically put of air stream as the components ergonomic design encompasses the blades inside the main housing of the damper
