Roofing sheets and steel purlins.
Titanium raw materials in bar, plate, sheet, wire, tube, coil etc.
Crc, prime quality hdg, coils, galvanized steel coils.
Titanium material in form of bars, billets, plates, sheets, and coils.Producer, Exporter
Used rails R50-R65: Specifications Of Used Rails R50 R65:- 1. R50(51.67KG/Meter, GOST 7173-55) 2. R65(64.72KG/Meter, GOST 8161-75) Composition : C - 0.71 - 0.84%: Mm-0.75 - 1.25 % : Si- 0.18 - 0.55% : S - not more than 0.045% : P - not more than 0.035% Nominal Specification for R-50 (51.67KG/M, GOST-7173-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max Nominal Specification for R-65(64.72KG/M, GOST -81(65-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max
Product Description And Chemical Composition / Packaging Specifications related to the content and quality of goods are as per details below: Non-LME Registered Primary Aluminium Ingot Purity: 99.7% Appearance: Silvery White Individual Ingot Weight: 22.5 kg Individual Ingot Dimensions: 740mm x 170mm x 114mm Number of Ingots per Bundle: 44 Bundle Dimensions: 740mm x 740mm x 1,025mm Nominal Weight of Bundle: 1,000 kg Bundle Strapping Material: Polyester Straps Strapping configuration: 3 Parallel Straps Chemical Composition Origin Russia or Ukraine Price $1850 MOQ (Trial) = 250 MT. Monthly quantities up to 2,000 5,000 MT available. A Element % Content Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.04 max. Vanadium (V) 0.03 max. Others (Each) 0.03 max. Others (Total) 0.10 max. Aluminium (Al) 99.7% min. B Element %Content Aluminium (Al) 99.7 min. Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.03 max. Copper (Cu) 0.01 max. Magnesium (Mg) 0.02 max. Others each 0.03 max. Total of other impurities 0.30 max.
Copper cathode SPECIFICATIONS: DIMENSIONS 914MM X 914MM X 12MM WEIGHT PER SHEET 125KG (+/- 1%)   NET WEIGHT PER PALLET 2MT APPROXIMATELY MINIMUM WEIGHT IN EACH CONTAINER 25MT APPROXIMATELY GROSS WEIGHT OF EACH CONTAINER 27.2MT APPROXIMATELY PACKAGING PALLETIZED, ALUMINUM BAND COPPER CATHODE CHEMICAL ANALYSIS CU 99.99-99.97% BASIS, REJECTION BELOW 99.97 INSPECTION: SGS or CCIC or Similar; OTHER ELEMENTS Silicate (Si) 0.3ppm Tellurium (Te) 0.5ppm Cobalt (Co) 0.2ppm Silver (Ag) 10ppm Lead (Pb) 0.2ppm Selenium (Se) 0.3ppm Iron (Fe) 2ppm Sulphur (S) 4ppm Aluminum (Al) 0.5ppm Magnesium (Mg) 0.4ppm Manganese (Mn) 0.5ppm Oxygen (O2) 0.00ppm Nickel (Ni) 0.2ppm Non Radioactivity Antimony (Sb) 0.1ppm Arsenic (As) 0.1ppm Bismuth (Bi) 0.1ppm Bill of lading: The official document, issued at the load port after completion of the loading operations, stating among other things, the shipâ??s loaded quantity, expressed in Cubic Meters (M3) and in Metric Tons (MT) per the definitions herein. This document has to be signed in original by the shipâ??s Master and made out in accordance without the instruction hereinafter specified in the Agreement
Retail and wholesale of any and all textile, fabric products; leather look fabrics fire retardant fabrics hessian and jute fabrics wide width sheeting fabrics blackout fabrics canvas, artist canvas fire retardant hessians blackout fabrics brocades satins, crepe satins polyesters fabric fluted leatherettes headlining fabrics 1000 denier waterproofs poly cotton drills dress fabrics silk fabrics fur fabrics fleece fabrics calico fabrics muslin fabric wide width muslin (fire retardant) pvc table covering gingham checks cottons, voiles polycotton fabric waterproof fabrics bed sheeting fabrics curtain lining fabrics curtain bump linings.
- 200,000 in stock now in the UK - - Price from 20p - NHS & care sector standard Type IIR Medical Face Masks - Manufacturer is on China's white list of medical face mask exporters - CE certified - EN 14683 - EN ISO 13485 -Declaration of conformity -Test report, technical data sheet and certificates available upon request (all independently verified)
Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
