Light Crude Oil Origin OMAN/NIGERIA/RUSSIA
Quantity:150 thousands MT. Location: Fujairah, Tank
Bitumen
All product range of Chevron and Caltex Lubricants.
Base Oil Or Virgin Oil The purity of base oils means that your additive packages can be optimized to meet performance objectives at lower treat rates and reduced cost. Your formulators won’t have to worry about compensating for the quality of the base stock in your finished products. You have more freedom in new product development. Base oils can improve the performance of your finished engine oils and other lubricants.
Bitumen Bitumen is a common binder used in road construction. It is principally obtained as a residual product in petroleum refineries after higher fractions like gas, petrol, kerosene and diesel, etc. are removed. Bitumen is also defined as a black or dark brown non-crystalline soil or viscous material having adhesive properties derived from petroleum crude either by natural or by refinery processes.
Industrial Oil Arsec Industrial Oil is ultra high performance lubricant for a vast array of uses, including long-service-life applications, high- and low-temperature applications, applications with the possibility of incidental food contact, and outdoor applications in marine environments and other areas where environmental concerns require the use of a very low-toxicity lubricant. Industrial oils are available in a wide range of ISO grades, with viscosities to meet any application requirement.
Lowest Prices for Light Naphtha. Product specifications as below: Density @ 15DC MAX 700 Kg/m3 Test Method - ASTM D1298 I.B.P MIN 35 DC Test Method - ASTM D86 10% Evaporated temp MAX 60 DC Test Method - ASTM D86 50% Evaporated temp MIN 85 DC Test Method - ASTM D86 95% Evaporated temp MAX 125 DC Test Method - ASTM D86 F.B.P MAX 150 DC Test Method - ASTM D86 Residue MAX 1.5 % Vol Test Method ASTM D86 Loss Max 1 % Vol Test Method ASTM D86 Total Sulphur MAX 0.03 % Wt Test Method ASTM D1266 Corrosion 3 HRS No 1 strip 50 DC Test Method ASTM D13 Vapour Pressure MAX 75 K.Pa Test Method ASTM D32 Mercaphtan Content MAX 25 PPM Test Method ASTM D322 Colour, Saybolt 20 min Test Method D156 Paraffins Content MIN 70 % VolTest Method ASTM D131 Oleffins Content MAX 2 % VolTest Method ASTM D131 Naphthense Content MIN 10 % VolTest Method ASTM D131 Aromatics Content MIN 5 % Vol Test Method ASTM D131 Lead (PB) P.P.B MAX 40 UopTest Method 350-68T C/H Ratio MAX 5.5Gum Existent (air jet) MAX 3 Mg/100mlTest Method ASTM D381g
Density @ 15 DC - Max 970 Kg/M3. Test Method - D1298 Kinematic Viscosity @ 50 DC - Max 280 CST. Test Method D-445 Visco.Rodwood1@37.7 DC - MAX 2500 SECS Pour Point - MAX 24 DC. Test Method D-97 Flash Point - MIN 65 DC. Test Method D-93 Sulphur Total - Max 3.5 Wt%. Test Method D-1552 Carbon Residue (Conradson) - MAX 15 WT%. Test Method D-189 Ash - MAX 0.05 WT%. Test Method D-482 Water & Sediment - MAX 0.5 VOL% Test Method D-1796 Calorific Value (Higher) - MIN 41.8 MJ/KG
FUEL OIL 380 CST AVAILABLE AT ATTRACTIVE PRICE. CURRENTLY CARGO IN FUJAIRAH HIGH SEAS!!! Lowest prices in middle east! density @ 15 dc - max 990 kg/m3. Test method - d1298 kinematic viscosity @ 50 dc - max 380 cst. Test method d-445 pour point - max 32 dc. Test method d-97 flash point - min 65 dc. Test method d-93 sulphur total - max 3.5 wt%. Test method d-1552 carbon residue (conradson) - max 15 wt%. Test method d-189 ash - max 0.15 wt%. Test method d-482 water & sediment - max 1.0 vol% test method d-1796 calorific value (higher) - min 41.7 mj/kg
Lowest Prices for Light Naphtha. Product specifications as below: Density @ 15DC â?? MAX 700 Kg/m3 Test Method - ASTM D1298 I.B.P â?? MIN 35 DC Test Method - ASTM D86 10% Evaporated temp â?? MAX 60 DC Test Method - ASTM D86 50% Evaporated temp â?? MIN 85 DC Test Method - ASTM D86 95% Evaporated temp â?? MAX 125 DC Test Method - ASTM D86 F.B.P â?? MAX 150 DC Test Method - ASTM D86 Residue â?? MAX 1.5 % Vol Test Method â?? ASTM D86 Loss â?? Max 1 % Vol Test Method â?? ASTM D86 Total Sulphur â?? MAX 0.03 % Wt Test Method â?? ASTM D1266 Corrosion 3 HRS â?? No 1 strip 50 DC Test Method â?? ASTM D13 Vapour Pressure â?? MAX 75 K.Pa Test Method â?? ASTM D32 Mercaphtan Content â?? MAX 25 PPM Test Method â?? ASTM D322 Colour, Saybolt â?? 20 min Test Method â?? D156 Paraffins Content â?? MIN 70 % Vol Test Method â?? ASTM D131 Oleffins Content â?? MAX 2 % Vol Test Method â?? ASTM D131 Naphthense Content â?? MIN 10 % Vol Test Method â?? ASTM D131 Aromatics Content â?? MIN 5 % Vol Test Method â?? ASTM D131 Lead (PB) P.P.B â?? MAX 40 Uop Test Method â?? 350-68T C/H Ratio â?? MAX 5.5 Gum Existent (air jet) â?? MAX 3 Mg/100ml Test Method â?? ASTM D381
Lowest Prices for Heavy Naphtha. Product specifications as below: Density @ 15DC â?? MAX 0.758 Kg/m3 Test Method - ASTM D1298 Distillation 10% Evaporated temp â?? MAX 120 DC Test Method - ASTM D86 50% Evaporated temp â?? MIN 115 DC Test Method - ASTM D86 95% Evaporated temp â?? 150-170 DC Test Method - ASTM D86 F.B.P â?? MAX 180 DC Test Method - ASTM D86 Residue â?? MAX 1.5 % Vol Test Method â?? ASTM D86 Loss â?? Max 1 % Vol Test Method â?? ASTM D86 Total Sulphur â?? MAX 0.08 % Wt Test Method â?? ASTM D1266 Corrosion 3 HRS â?? No 1 strip 50 DC Test Method â?? ASTM D130 Vapour Pressure â?? MAX 27 K.Pa Test Method â?? ASTM D323 Mercaphtan Content â?? MIN 70 PPM Test Method â?? ASTM D3227 Colour, Saybolt â?? 20 min Test Method â?? D156 Paraffins Content â?? MIN 50 % Vol Test Method â?? ASTM D1319 Oleffins Content â?? MAX 1.5 % Vol Test Method â?? ASTM D1319 (Naphthens + Aromatics) Content â?? MIN 10 % Vol Test Method â?? ASTM D1319 Lead (PB) P.P.B â?? MAX 40 Uop Test Method â?? 350-68T C/H Ratio â?? MAX 6 Gum Existent (air jet) â?? MAX 2.5 Mg/100ml Test Method â?? ASTM D381 Oxygenates â?? MAX 60 PPM Test Method â?? ASTM D4815
Lowest prices for GAS OIL 500 PPM. Product specifications as below: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? Min 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 54 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 0.05 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
LOWEST PRICES FOR GAS OIL 0.5%. PRODUCT SPECIFICATIONS AS BELOW: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? Min 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 60 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 0.5 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
LOWEST PRICES FOR GAS OIL 1%. PRODUCT SPECIFICATIONS AS BELOW: Density @ 15 DC â?? 820-860 Kg/m3 Test Method â?? ASTM D1298 Distillation Recovered @ 357 DC â?? MIN 90 Vol% Test Method â?? ASTM D86 F.B.P â?? MAX 385 DC Test Method â?? ASTM D86 Colour â?? MAX 3 Test Method â?? ASTM D1500 Flash Point â?? MIN 54 AND 60 DC Test Method â?? ASTM D93 Sulphur Total â?? MAX 1 wt% Test Method â?? ASTM D1552 Corrosion-3hrs@100 DC â?? 1 a Test Method â?? ASTM D130 Viscosity Kinematic @ 37.8 DC â?? 2.0-5.5 c.St Test Method â?? ASTM D445 Cloud Point â?? MAX 2.0 DC Test Method â?? ASTM D2500 Pour Point â?? MAX -3.0 Test Method â?? ASTM D97 Carbon Residue (on 10% Bottoms) â?? MAX 0.1 wt% Test Method â?? ASTM D189 Ash â?? MAX 0.01 wt% Test Method â?? ASTM D482 Water & Sediment â?? MAX 0.05 Vol% Test Method â?? ASTM D2709 Cetane Index â?? MIN 49 Test Method â?? ASTM D976
- Hydraulic Oils. - High Temp Chain Oils - Steam Cylinder - Spindle Oils - Heat Transfer Fluids - Circulating Oils - Industrial Gear Oils - Compressor Oils - Transformer Oils - Turbine Oils
Below is our deals for crude oil: 1. USA seller, Now is only Russian crude oil available, the qtty is open, the price CIF, Brent minus 4$ per barrel or Rotterdam minus 4$. 2. Iraqi Crude oil, Seller is SOMO, Iraqi oil marketing A. Deal with condition that buyer must own refinery or Trader has 65% of refinery share. B. Deal with No condition, just any oil company has the ability to buy. In this case, depends on the deal as qtty and discount and it is range from (3)$ to (7) $, FOB, Basrah terminal. For example, there is a deal now, 34 million bbl, Basra light crude oil with (3)$ discount FOB, All somo deals FOB there is No CIF from somo. For any deal, some times we must have the buyer ready with LOI and Bcl or at least LOI, to hold the deal for us then we should provide other documents. Generally: For Europe the discount range From 6-7$ and will be Net to the buyer around (5)$ to (5.5)$, FOB. The difference is Iraqi group commission with somo personal. For the UK from (8)$ to (9)$ discount, this is the total discount by then will tell us how much Iraqi group will take the commission and the rest to the buyer as a NET discount. For USA buyer, this is best discount and depending on location in the USA, for example, it is starting from (10)$ and up to (18)$ or more, specifically in western Texas is the best ever!
Hi Sir kindly note that we could supply you with Light Crude oil, MOQ 1mm BBL, PRICE BRENT -1 USD ON FOB TERM, if interested please do not hesitate to contact me
Product Details: Minimum Order Quantity 100 Metric Ton Type Of Bitumen Bitumen Emulsion, Industrial Grade, Asphalt Penetration Grade 60/70 Viscosity Grade VG-10, VG-20, VG-30 Application Road Construction a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing.
Being a well-distinguished company in the market, we are into offering Virgin Base Oil SN 500. Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. One of the most important factors is the liquid's viscosity at various temperatures. Whether or not a crude oil is suitable to be made into a base oil is determined by the concentration of base oil molecules as well as how easily these can be extracted. Base oil is produced by means of refining crude oil. This means that the crude oil is heated in order that various distillates can be separated from one another. During the heating process, light and heavy hydrocarbons are separated - the light ones can be refined to make petrol and other fuels, while the heavier ones are suitable for bitumen and base oils.[1] There are large numbers of crude oils all around the world that are used to produce base oils. The most common one is a type of paraffinic crude oil, although there are also naphthenic crude oils that create products with better solubility and very good properties at low temperatures. By using hydrogenation technology, in which sulfur and aromatics are removed using hydrogen under high pressure, you can obtain extremely pure base oils, which are suitable when quality requirements are particularly stringent.[2] Chemical substances - additives - are added to the base oil in order to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties. Certain types of motor oils contain more than twenty percent additives
