Find Verified Petroleum Oil Related Products Suppliers, Manufacturers and Wholesalers

IOC JET A-1 is a petroleum distillate blended from kerosene fractions having Aromatics
below 20 % v/v, Total sulphur below 0.25 % mass, Mercaptan Sulphur below 0.002 %
mass, freezing point below - 47 0
C and a flash point above 38 0
C. It contains Static
Dissipator additive STADIS 450.

Density @ 15 C max.... 991 kg/m3
Viscosity @ 50 C max.... 180 mm2/s
Water max... 0.5% (v/v)
Sulphur max... 3.5 % (m/m)
Flash Point min.... 60 0C
Pour Point max... 30 0C
Micro Carbon Residue max... 15 % (m/m)
Ash max.... 0.1 % (m/m)
Total Sediment Potential max... 0.1 % (m/m)
Vanadium max.... 200 mg/kg
Aluminium + Silicon max... 80 mg/kg
Zinc max... 15 mg/kg
Phosphorus max... 15 mg/kg
Calcium max... 30 mg/kg

The unit of viscosity used is the Centistoke and the d6 fuel most frequently quoted are listed below in order of cost, the least expensive first :

* IFO 380 â?? Intermediate d6 fuel oil with a maximum viscosity of 380 Centistokes

* IFO 180 Intermediate d6 fuel oil with a maximum viscosity of 180 Centistokes

* LS 380 Low-sulphur (

1- Antioxidant in hydro processed fuel mim/max..... 17/24 Mg/l
2- Antioxidant non hydro processed fuel max.....24 Mg/l
3- Static dissipater first doping ASA-3 max ...... 1Mg/l
4- Stadis 450 max.... 3Mg/l
5- Specific energy, net min.... 18.4 MJ/kg
6- Smoke point max.... 19M/m
7- Luminomitier number max.... 45
8-Naphthalenes max.... 3%volume
8-Total Acidity max... 0.1 MG. KOH/g
9-Aromatic max... 22.0%vol
10-Sulphur Total max... 0.3 %mass
11-sulphur Mercaptan max... 0.003 %mass
12-Recovered residuals max.... 1.5%vol
13-Loss max.... 1.5%vol
14-Flash Point max... 42 Centigrade
15-Density at 15.�°C Min/Max... 776/840 kg / m2
16-Freezing point max.... - 40 Centigrade
17-Corrosion copper (2hrs at 100c) max.... 1
18-Corrosion silver (4hrs at 100c) max.... 1
19- Filter Pressure differential mm.Hg max... 25
20-Tube deposit rating (visual) max....

1-Ash content..... 0.14%max
2-Mass fraction of sulphur.... 0.5max
3-Temperature of solidification.... 25� C max
4-Kinematics viscosity.... 118max
5- water content.... 0.5%max
6- Mechanical impurities... 0.1%max
7- Hydrogen sulphide content Hâ??S ppm..... 0.5max
8- Carbon residual.... 7%max
9- Aluminium (Al) ppm.... 5 max
10- silicone (si)..... 12 max
11- sodium (NA).... 15max
12- Asphaltene m/m... 3.6%max
13- lnltial Bolling Point deg.... 216�°C
14- Final Bolling Point deg.... 550C
15- percent recovered.... 78%vol
16- Residual.... 22%vol
17- Total Nitrogen... 0.192%m/m

Mazut

Jet Fuel

Jet A-1 Fuel

Supplier from Abu Dhabi, UAE

We Supply American Dyno-tab Products (Fuel Treatment, Injector Cleaner, Octane Booster, Fuel Stabilizer, ULTRA Fuel Booster, Cooling System Treatment, Windshield Cleaner), in tablets for all kind of fuel tank capacities

Benefits:
1-Help improve fuel economy 15% - 20%
2-For Gasoline & Diesel Engines
3-Suitable for cars, trucks, vessels, bikes, generators
4-Increase power
5-Increase performance
6-Increase Octane
7-Increase Acceleration
8-Reduce smoke & emissions
9-Clean Engines
10-Made in USA
11-EPA (Environmental Protection Agency) Approval
12-Global Warranty.

Al Mehdar & Union Chemical Factories were established in UAE in the year 1982. We are primarily devoted to the manufacture of tailor-made lubricants. We provide products under our own brand name or under a private label of customers choice. We had started producing lubricants under our own brand name "SUPERSTAR" which now is famous name throughout Africa, Middle East, Asia and U.A.E. Our products are manufactured according to the highest quality standards - they meet the requirements of all major Original Equipment Manufacturers and yet are extremely price competitive as we run a modern sophisticated plant. Every process checked for quality to give extreme performance. We are growing, and using new technologies to solve ever-changing customer needs. On the way, we strive to use our tremendous global reach, strength of our process knowledge and personnel to position ourselves to deliver anywhere in the world the best of our products. Al Mehdar & Union Chemical Factories offers you a complete range of lubricants for automotive and industrial applications.
Automotive lubricants:
Meets the specification of Japanese. European and American automobile manufacturers. Apart from motor and diesel engines we cater for high speed diesel engines, off road vehicles and two stroke engines. To compliment the automotive category, we offer motorcycle engine oil, gear oil, brake fluid, anti-freeze coolant and bearing greases.
Industrial Lubricants:
Al Mehdar & Union Chemical Factories markets an ever-expanding line of industrial lubricants. These include Medium Speed Diesel Engine Oils, Anti Wear Hydraulic Oil, Soluble Cutting Oils, Heat Transfer Oils, Slide way Oils, Rust Preventives, Chassis Greases, Multi-pupose greases and speciality products such as Metal Cutting Fluids. Our full scale package service combines product formulation, raw material sourcing, package designing and warehousing.

Specifications:

Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05
Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49
Viscosity Index 115 120 130 137 137
Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845
Pour Point deg C -27 -24 -18 -15 -12
Flash Point deg C 170 190 220 235 255
Evaporation Loss noack
method %M/M - - 12.5 6.8 3.5
Apparent Viscosity
by CCS @-30 deg C mPas - - 1400 3700 8000
Sulfur mg/kg

Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05
Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49
Viscosity Index 115 120 130 137 137
Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845
Pour Point deg C -27 -24 -18 -15 -12
Flash Point deg C 170 190 220 235 255
Evaporation Loss noack
method %M/M - - 12.5 6.8 3.5
Apparent Viscosity
by CCS @-30 deg C mPas - - 1400 3700 8000
Sulfur mg/kg

Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05
Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49
Viscosity Index 115 120 130 137 137
Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845
Pour Point deg C -27 -24 -18 -15 -12
Flash Point deg C 170 190 220 235 255
Evaporation Loss noack
method %M/M - - 12.5 6.8 3.5
Apparent Viscosity
by CCS @-30 deg C mPas - - 1400 3700 8000
Sulfur mg/kg

Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05
Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49
Viscosity Index 115 120 130 137 137
Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845
Pour Point deg C -27 -24 -18 -15 -12
Flash Point deg C 170 190 220 235 255
Evaporation Loss noack
method %M/M - - 12.5 6.8 3.5
Apparent Viscosity
by CCS @-30 deg C mPas - - 1400 3700 8000
Sulfur mg/kg

HDPE WAX available monthly 100 Mt

for more details feel free to contact us at

We are a UAE based company with oil production facilities in the vicinity of the UAE.

Our company provides all kinds of oil products around the world on a monthly basis,

Our Furnace oil Specification:
Flash Point °C below zero
*Density - Kg/l 0.7495
*Destillation - °C IBP 52. °C FBP 260
* IBP - °C 45
* FBP - °C 265

We are a UAE based company with oil production facilities in the vicinity of the UAE.

Our company provides all kinds of oil products around the world on a monthly basis,

We have adequate experience to deliver to you a High Caliber of furnace oil.

Quality:
Flash Point - B �C 84
*Density - Kg/l 0.9299
*Sulphur Content - %m 1.91
*Viscosity, Kinematic - mm2 /s 33.89
Port for shipping Dubai
Shipping method FOB

Kindly contact us:
Shushrut Pattiwar
Business Development Executive
Mobile: +971-503027445
Phone: +971-48769366
Email: marketing@gulfenviro.ae
Gulf Environment & Waste FZE

We are a UAE based company with oil production facilities in the vicinity of the UAE.

Our company provides all kinds of oil products around the world on a monthly basis,

Quality:
Flash Point - B °C 84
*Density - Kg/l 0.9299
*Sulphur Content - %m 1.91
*Viscosity, Kinematic - mm2 /s 33.89
Port for shipping Dubai
Shipping method FOB

Tasnee dry PE wax