Palm oil codex
Stan 125-1981
Water and volatile matter 0, 2% maximum
Insoluble impurities 0.05% maximum
Soap content 0.005% maximum
Free fatty acids 0, 15%
Maximum expressed as palmitic acid
Colour (lovibond 5 1/4 inch cell) red 6 maximum
Phosphorus not
More than 4 mg/kg
Iodine number (wijs) 50 to 55
Palmitic acid 39.3 to
47.5% of total fatty acids present
Cholesterol not
More than 4% of total sterol content
Oleic acid 36 to
44% of total fatty acids present
Refractive index (n50/d) 1.454 - 1.456
Relative density (50°c/water at 20°c) 0.891 - 0.899
Authorised additives max.
75mg of butylated hydroxytoluene (bht-e-321) per kg of oil
Peroxide maximum 10
Milliequivalents peroxide oxygen/kg oil
Carotenoids in red palm oil min 500
Mg/kg and not more than 2'000mg/kg calculated as beta
Vitamin a+d
Drums, pet bottles - 1l, 2l, 5l, 20l.
Buyer's needs.
We can offer LIGHT CRUDE OIL from Oman,Abu Dhabi,Nigeria and Russia as follows
Cargo Size: 1 million bbl to 3 million bbl
Contract Annual Contract 12 months
Quantity: 1 million bbl to 3 million bbl per vessel / per month
Delivery Terms: CIF POD, Or Fob Terms
Surveyor: SGS or any other world's TOP Inspection agency.
To Be Agreed With Buyer As Per Delivery Terms. (see Down Below)
Payment Terms: SBLC /MT103 or others
The purity of base oils means that your additive packages can be optimized to meet performance objectives at lower treat rates and reduced cost. Your formulators won’t have to worry about compensating for the quality of the base stock in your finished products. You have more freedom in new product development. Base oils can improve the performance of your finished engine oils and other lubricants.
Arsec Industrial Oil is ultra high performance lubricant for a vast array of uses, including long-service-life applications, high- and low-temperature applications, applications with the possibility of incidental food contact, and outdoor applications in marine environments and other areas where environmental concerns require the use of a very low-toxicity lubricant. Industrial oils are available in a wide range of ISO grades, with viscosities to meet any application requirement.
arsec Marine Oil exhibits a high level of detergency and disperancy due to its high TBN and sulphate ash content.
arcec Marine Oil is formulated with high quality base in conjunction with latest additive technology. It is highly recommended for marine and industrial diesel engines including turbo charged models operating in all types of conditions.
Origin: Kazakhstan, Georgia, Malaysia
Incoterms: CIF/FOB
Loading Port: Rotterdam and Houston etc
Payment Terms: MT103 TTWIRE
Performance Bond: 2% PB
Contract Term: SPOT 6-12 Month Minimum (With Rolls and Extension
Inspection: SGS CIQ or Similar
Dubai Crude Oil
Minimum Quantity: 50,000 MT per month
CIF Price: Gross USD $91.00 BBL / Net USD $87.00 BBL NET
FOB Price: Gross USD $62.00 BBL / Net USD $58.00 BBL NET
TRANSACTION WORKING PROCEDURE FOB Rotterdam/Houston
1. Buyer sends Company Profile along with ICPO, Tank Storage Agreement (TSA) and data page of buyers passport
2. Seller Issues commercial invoice (CI), Buer signs and returns commercial invoice back to seller.
3. Seller verify buyer TSA by Letter and Seller issues the following POP documents to buyer:
a)Statement of Product Availability
b)Commitment Letter of Supply
c)Unconditional Dip Test Authorization (UDTA)
d)Authorization to Sell and Collect (ATSC)
e)Authorization to verify the product in Seller''s tank (ATV)
f) Fresh SGS not older than 72 hours
4. NCNDA/IMFPA will be signed among all parties involved.
5. Buyer options conduct DIP TEST on the product and make the payment for the total value of product injected into the tanks through the means of mT103-TT
6. Seller pays commission to all intermediaries involved in the transaction and subsequently monthly shipment continues as per terms and conditions of the commercial invoices and extension of transaction by issuing 12 months contract to buyer for proceeding.
STAND TRANSACTION CIF PROCEDURES
1. Seller confirms ICPO + passport of buyer and issues FCO for signing
2. Seller issues contract for amendment and countersigning as per mutual agreement.
3. Seller legalizes and register contract at seller expense and send to buyer as final approved, registered and legalized contract
4. Seller sends to buyer via e-mail, the following POP documents in buyer''s name for verification of the allocation:
A. Statement of product availability
B. Refinery commentment to supply
C. Company profile
D. MSDS
E. Company license to export
5. Buyer and Seller sign the CPA with the secured shipping company for documentation along with the NCNDA and IMFPA for commission construction
Origin: Kazakhstan, Georgia, Malaysia
Incoterms: CIF/FOB
Loading Port: Rotterdam and Houston etc
Payment Terms: MT103 TTWIRE
Performance Bond: 2% PB
Contract Term: SPOT 6-12 Month Minimum (With Rolls and Extension
Inspection: SGS CIQ or Similar
Dubai Crude Oil
Minimum Quantity: 50,000 MT per month
CIF Price: Gross USD $82.00 BBL / Net USD $78.00 BBL NET
FOB Price: Gross USD $59.00 BBL / Net USD $55.00 BBL NET
TRANSACTION WORKING PROCEDURE FOB Rotterdam/Houston
1. Buyer sends Company Profile along with ICPO, Tank Storage Agreement (TSA) and data page of buyers passport
2. Seller Issues commercial invoice (CI), Buer signs and returns commercial invoice back to seller.
3. Seller verify buyer TSA by Letter and Seller issues the following POP documents to buyer:
a)Statement of Product Availability
b)Commitment Letter of Supply
c)Unconditional Dip Test Authorization (UDTA)
d)Authorization to Sell and Collect (ATSC)
e)Authorization to verify the product in Seller''s tank (ATV)
f) Fresh SGS not older than 72 hours
4. NCNDA/IMFPA will be signed among all parties involved.
5. Buyer options conduct DIP TEST on the product and make the payment for the total value of product injected into the tanks through the means of mT103-TT
6. Seller pays commission to all intermediaries involved in the transaction and subsequently monthly shipment continues as per terms and conditions of the commercial invoices and extension of transaction by issuing 12 months contract to buyer for proceeding.
STAND TRANSACTION CIF PROCEDURES
1. Seller confirms ICPO + passport of buyer and issues FCO for signing
2. Seller issues contract for amendment and countersigning as per mutual agreement.
3. Seller legalizes and register contract at seller expense and send to buyer as final approved, registered and legalized contract
4. Seller sends to buyer via e-mail, the following POP documents in buyer''s name for verification of the allocation:
A. Statement of product availability
B. Refinery commentment to supply
C. Company profile
D. MSDS
E. Company license to export
5. Buyer and Seller sign the CPA with the secured shipping company for documentation along with the NCNDA and IMFPA for commission construction
Being a well-distinguished company in the market, we are into offering Virgin Base Oil SN 500.
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. One of the most important factors is the liquid's viscosity at various temperatures. Whether or not a crude oil is suitable to be made into a base oil is determined by the concentration of base oil molecules as well as how easily these can be extracted.
Base oil is produced by means of refining crude oil. This means that the crude oil is heated in order that various distillates can be separated from one another. During the heating process, light and heavy hydrocarbons are separated - the light ones can be refined to make petrol and other fuels, while the heavier ones are suitable for bitumen and base oils.[1]
There are large numbers of crude oils all around the world that are used to produce base oils. The most common one is a type of paraffinic crude oil, although there are also naphthenic crude oils that create products with better solubility and very good properties at low temperatures. By using hydrogenation technology, in which sulfur and aromatics are removed using hydrogen under high pressure, you can obtain extremely pure base oils, which are suitable when quality requirements are particularly stringent.[2]
Chemical substances - additives - are added to the base oil in order to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties. Certain types of motor oils contain more than twenty percent additives
BENZOL Diesel Engine Oil is a premium quality heavy duty lubricant designed specifically to meet widge range of diesel engines. The oil Blended with high quality base oils which incorporate with advanced additive packages in order to provide extended drain interval with full performance satisfaction on road and off road engine under moderate to serve service conditions.
It is formulated for use in all types of Diesel Engines such as Truck, Bus, MUV, Taxi, Tractor, Pump Set & Diesel Generator.
Motor Oil, offered by us, is excessively required for the functioning of motor engine. We acquire the finest quality Motor Engine Oil from the most trusted dealers. The bulk amount of Motor Engine Oil is stored in our well-organized storehouse. We also have proper arrangements for the shipping of Motor Engine Oil. Clients can avail the Motor Engine Oil from us at very reasonable prices.
SCOPE PEGASO Fully Synthetic Oil has been formulated for latest on-road, high-performance and turbo-charged, inter-cooled direct injection high performance gasoline and diesel engines with normal SAPS passenger car portfolio. It provides outstanding protection against engine wear under high-temperature and high engine speed conditions. It is blended from synthetic base components, highly shear stable viscosity modifiers and premium tier additive package. Suitable for ACEA 2012 normal SAPS requirements formulations.
