Aviation Turbine Fuel (Jet Fuel) CIVIL JET FUELS Aviation turbine fuels are used for powering jet and turbo-prop engined aircraft and are not to be confused with Avgas. Outside former communist areas, there are currently two main grades of turbine fuel in use in civil commercial aviation : Jet A-1 and Jet A, both are kerosene type fuels. There is another grade of jet fuel, Jet B which is a wide cut kerosene (a blend of gasoline and kerosene) but it is rarely used except in very cold climates. JET A-1 Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38�°C (100�°F) and a freeze point maximum of -47�°C. It is widely available outside the U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91 (Jet A-1), (formerly DERD 2494 (AVTUR)), ASTM specification D1655 (Jet A-1) and IATA Guidance Material (Kerosine Type), NATO Code F-35. JET A Jet A is a similar kerosene type of fuel, produced to an ASTM specification and normally only available in the U.S.A. It has the same flash point as Jet A-1 but a higher freeze point maximum (-40�°C). It is supplied against the ASTM D1655 (Jet A) specification. JET B Jet B is a distillate covering the naphtha and kerosene fractions. It can be used as an alternative to Jet A-1 but because it is more difficult to handle (higher flammability), there is only significant demand in very cold climates where its better cold weather performance is important. In Canada it is supplied against the Canadian Specification CAN/CGSB 3.23 MILITARY JP-4 JP-4 is the military equivalent of Jet B with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-4. (As of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-4 also meets the requirements of the British Specification DEF STAN 91-88 AVTAG/FSII (formerly DERD 2454),where FSII stands for Fuel Systems Icing Inhibitor. NATO Code F-40. JP-5 JP-5 is a high flash point kerosene meeting the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-5 (as of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-5 also meets the requirements of the British Specification DEF STAN 91-86 AVCAT/FSII (formerly DERD 2452). NATO Code F-44. JP-8 JP-8 is the military equivalent of Jet A-1 with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-83133E. JP-8 also meets the requirements of the British Specification DEF STAN 91-87 AVTUR/FSII (formerly DERD 2453). NATO Code F-34.
Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, Oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 oC (104 o F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha. Fuel oil with following specification is available: CST 180 and CST 230 Viscosity kinematic @ 50 C (max) 180 230Pour point (max) C 5.0 15.0Flash point (min) C 63 63Sulphur Total (max) %mass 3.0 3.0Carbon Residue Conradson (max)%mass 13 13Ash (max) %mass 0.05 0.05Water & sediment (max) %vol 0.5 0.5Colorific value higher (min) MJ/kg 42.2 42.2
Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, Oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 oC (104 o F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha. Fuel oil with following specification is available: CST 280 and CST 380 Density @ 15 �° C (max) kg /L 0.97 0.99Viscosity kinematic @ 50 �° C (max) 280 380Pour point (max) �° C 24 32Flash point (min) C 65 65Sulphur Total (max) %mass 3.5 3.5Carbon Residue Conradson (max)%mass 15 20Ash (max) %mass 0.15 0.15Water & sediment (max) %vol 1.0 1.0Colorific value higher (min) MJ/kg 41.7 41.7
Rotterdam & Houston availability Tank to Tank or Tank to Vessel Platts -8 Gross / -6 Net 200,000 MT per month available
Jet a1 and en590 jet fuel available at below platt in Rotterdam, Houston. Quantity Method of Delivery: TTO, TTV etc. Type of Delivery: CIF/FOB What Port? Target Price Where is Customer
Jet A1 non-sanctioned Kazakhstan, in tanks. Please come ready with the actual end buyer for SCO, there are so many scammers online, let's not waste time playing games. If you have an actual buyer who has the means, ready to send an ICPO please reach out, otherwise don't waste your valuable time. JETA1 FOB Rotterdam FOB PROCEDURE OF TRANSACTION 1. Buyer issues irrevocable corporate purchase order (ICPO) with seller's transaction procedure along with Passport copy of the company representative. 2. Seller issues commercial invoice (CI) within 24 hours using these procedures. 3. Buyer return counter-signed commercial invoice to seller with buyer CPA upon verification of buyer CPA seller issues the below listed PPOP: Refinery Commitment to Supply. Certificate of Origin, 24-48 hours old Fresh Dip-test Analysis report by Independent Quality Services (IQS) Tank Storage receipt (TSR). Injection Report (IR) by Renowned Netherlands Injection Company. 4. Buyer/Seller jointly pay the cost of Injection to the Injection company for Injection and endorsing of TTVIA. (Seller and Buyer pays the cost of injection equally 50% each). 5. Upon the confirmation of the payment for injection fee and signing of TTVIA by Injection company to Seller and Buyer, Seller issues Unconditional DTA and Authority To Verify ATV for buyer to proceed with the Dip Test On product in seller's tank. 6. Upon successful Dip Test, Injection company injects the products to buyers vessel and buyer makes payment to seller with 72 hours. 7. Seller transfer title to buyer and pays intermediary involved in the transaction
BUYER REQUEST NOT LESS THAN 1,000,000 BBL. MAXIMUM QUANTITY: 5,000,000 BBL. X 12 MONTHS. FOB PRICE: GROSS PRICE $78 / NET PRICE $75 PER BARRELS.
MINIMUM QUANTITY: BUYER REQUEST NOT LESS THAN 100,000,000 GALLONS MAXIMUM QUANTITY: 500,000,000 GALLONS X 12 MONTHS. Direct buyers only, no buyer chains or buyer mandates.
MINIMUM QUANTITY: BUYER REQUEST NOT LESS THAN 1,000,000 BBL. MAXIMUM QUANTITY: 5,000,000 BBL. X 12 MONTHS. Direct buyers only, No buyers mandates.
JET FUEL TS-1
JET FUEL (A1)
GASOLINE 93/95 PCT/ROM UNLEADED PETROGAS
AVIATION KEROSENE COLONIAL GRADE 54 (JET FUEL JP54)
Kazakhstan/azerbaijan Origin Jet Fuel Ts-1 Minimum Quantity: Buyer Request Not Less Than 1,000,000 Bbl. Maximum Quantity: 5,000,000 Bbl. X 12 Months. Fob Price: Gross Price $78 / Net Price $75 Per Barrels
Kazakhstan/azerbaijan Origin Jet Fuel (A1) Minimum Quantity: Buyer Request Not Less Than 1,000,000 Bbl. Maximum Quantity: 5,000,000 Bbl. X 12 Months. Fob Price: Gross Price $75 / Net Price $70.
Kazakhstan/azerbaijan Origin Gasoline 93/95 Pct/rom Unleaded Petrogas Minimum Quantity: Buyer Request Not Less Than 1,000,000 Bbl Maximum Quantity: 3,000,000 Bbl X 12 Months Fob Price: Gross Price $70.00 / Net Price $65.00
Kazakhstan/azerbaijan Origin Aviation Kerosene Colonial Grade 54 (Jet Fuel Jp54) Minimum Quantity: Buyer Request Not Less Than 1,000,000 Bbl Maximum Quantity: 52,000,000 Bbl X 12 Months Fob Price: Gross Price $65.00 / Net Price $60.00
Product: Gasoline- Auto Quantity/Month : 50,000-500,000-MT Origin: Qatar
Product: Jet Fuel Quantity/Month : Min 500,000 Bls, Max 5,000,000 Bls Origin: Rotterdam/Houston/Qatar
A1 JET FUEL.BARREL For sale 90/80 I can supply any types of products