USA Medical Healthcare Suppliers and Manufacturers

General Hospital Gown Features Type: low-level hospital gown Gown usability: disposable Material type: CPE Colour: blue Packaging: 1 per bag Why Our Gowns Low-linting Made from a breathable CPE material Easy to use and lightweight, allowing optimal freedom of movement Strong seams for improved durability CPE Comfortable Protective Gowns In Stock Our non-surgical AAMI level 1 protection gowns come with a variety of comfort features that will make sure you donâ??t feel encumbered by their presence. Perfectly sized for ease of use, these medical gowns cover all critical zones, providing enough protection in minimum-risk situations where there a low chance of liquids coming into contact with the wearer. When it comes to CPE material, chlorinated polyethylene is an effective blood repellent that is also lightweight, durable and breathable.Specifically created to allow freedom of movement, our gowns come with strong seams and elastic knitted cuffs. Use of Sterile Disposable Non-Surgical Drapes The main difference between surgical and� non-surgical gowns� lies in the fact that non-surgical ones like ours are lightweight and provide <4.5g spray impact penetration. They are intended for basic hospital and clinic care, protecting the wearer from other influences, and other patients from microorganisms of the wearer. This low-level type of protective wear isnâ??t just reserved for medical personnel â?? you can also use coveralls for industrial operations, larger business organizations, and even for domestic use. Important Safety Features for Medical Gowns At Vannin Healthcare Global, we are proud to say that weâ??ve manufactured extremely durable and resistant gowns that passed both the hydrostatic pressure and impact penetration test. While ensuring uncompromising protection in all circumstances that comply with the levels of liquid barrier performance issued by the Association of the Advancement of Medical Instrumentation (AAMI), we have obtained both relevant CE certification and full FDA clearance. Our non-surgical PE gowns are in compliance with ISO 9001:2015 and ISO 13485:2016. Please note that these gowns have an EN 13795 certificate which is equivalent to low level AAMI hospital gowns. Medical Gown Performance Standards â?? Overview Tear Resistance ASTM D5587(woven) ASTM D5587 (non-woven) ASTM  D1424 Tensile Strength ASTM D5034 ASTM D1682 / Seam Strength ASTM D751 Breathability (Water Vapour) ASTM F1868 Part B ASTM D6701 (non-woven) ASTM D737-75 Lint Generation ISO 9073 Part 10

General Features of our Face Shields Easy to clean and sterilise Eco-friendly Anti-fog Large 43cm/17 protective surface Why our Face Shields More comfortable to wear than a face mask Lightweight Easy to assemble Easy to Clean and Sterilise Our Face shields were made with non-porous plastic which makes it easy to clean and sterilise. Being exceptionally durable as well, our shields� can be used many times if properly handled and regularly disinfected. Anti-fog The elastic band that goes over your head is attached to another one which holds your shield in place. This leaves enough space between your head and the shield, preventing the hot air from becoming trapped between your face and the protective plastic. Unlike other face shields that usually use foam, our face shields were especially designed to be anti-fog by� maximising breathability and visibility. Eco-friendly The plastic used to make our face shields is� 100% recyclable. Vannin Healthcare was specifically focused on a combination of recyclability and breathability to protect you in more than one ways, both long- and short-term. A lightweight alternative to a face mask, our shields are� easy to assemble and comfortable.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CEâ??certified Fully certified Chinese standard (GB/T 32610-2016) BFE <90% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Comfort Features Higher breathability due to the lightweight material The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) With the standard BFE being met, our masks effectively resist bacterial penetration with a rating of at least 95%. You can go about your day, knowing you are practically perfectly protected from the air pollutants around you. 100% compliant with regulations (CE, GB/T 32610-2016) Our daily protective masks are 100% CE certified. They are also in accordance with the Chinese standard GB/T 32610-2016. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The soft lightweight material of the masks makes them perfect for everyday use. The breathing resistance is low, and the light and soft material of the inner layer was specifically designed to make your mask-wearing more comfortable. Disposable In order for masks to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the WHO guidelines for correctly putting the mask on and off.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CEâ??certified In accordance with the European standard EN14683:2005 BFE â?¥98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of even smaller liquid droplets Splash-resistant ( >120 mmHg) Comfort Features Breathing resistance <49 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply Type II R face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants and penetration of bodily fluids. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II R medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98- 99.9% protected from inhaling airborne pollutants or hazardous splatter. 100% compliant with regulations (CE, EN14683:2005) Our 3-ply surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Splash resistance The unique feature of Type II R surgical masks is the liquid-repellent layer offering additional protection against particulate matter and infectious splashes. The greater protective efficiency of the masks adequately makes up for the higher breathing resistance (<49 Pa/cm2). Disposable In order for your Type II R mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants  It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th

General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto

The test strips are held in a convenient, plastic dispensing carton. The kits contain a laminated color chart, (2) sample tubes with caps, and (2) 15' test paper rolls that allow for approximately 100 tests per roll. The color chart has color matches at 0, 12.5, 25, and 50ppm (parts per million) of titratable iodine. This kit meets requirements for federal, state, and local health regulations that require users of iodine-based sanitizer solutions to verify their strength with appropriate test kits. For accurate results, store these test strips away from areas with high humidity or where they may be exposed to water before use, as those conditions may compromise results. Additional information Weight 0.13 lbs Quantity 1/Each Length 15 Feet Width 5/32 Inches Test Level 0 - 50 PPM Type Test Kits

Cleveland 115036 Water Quality Test Kit Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed. Additional information Weight 1 lbs Quantity 1/Each Type Water Test Strips