British Slipper Material Suppliers and Manufacturers

Polyester chips usually refers to the polyester raw materials obtained from the polymerization production is generally processed into about 4 * 5 * 2 mm or so sheet particles. 1. According to the composition and structure can be divided into: blended, copolymerization, crystalline, liquid crystal, cyclic polyester chips and so on; 2. According to the performance can be divided into: coloring, flame retardant, antistatic, moisture absorption, anti-pilling, antibacterial, whitening, low melting point, viscosity (high viscosity) polyester chips, etc.; 3. According to the use can be divided into: fiber grade polyester chips, bottle grade polyester chips, film grade polyester chips (mainly different process indicators). Fiber grade polyester chips according to which the content of matting agent tio2 can be divided into: super glossy (big glossy), glossy, semi-matte, (full) matte polyester chips. There are also cationic polyester chips. Polyester applications now include fibers, various types of containers, packaging materials, films, films, engineering plastics, and other fields.

Polyvinyl Chloride(PVC) PVC is called poly vinyl chloride, the main ingredients of PVC; it has the bright-colored, corrosion-resistant and durable property. It is often add some plasticizers, anti-aging agent, and additively in the process to enhance its heat resistance, toughness, scalability and so on. All kinds of PVC granules, such as rigid, soft, clear and various colors are available. They are used in extrusion, injection and so on, for PVC profile, PVC frame, pipe, seal raw material. Application Division according to application: 1.Building materials: such as PVC tubing, PVC pipes, panel and section bars. 2.Packing materials. 3.Electronic materials: such as electronic wires, cables,adhesive tapes and bolts. 4.Furniture and ecorating materials,etc. 5.Others: leatheroid, medical disposable products, antiseptic paint,etc.

Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³). The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.

Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles

High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.

HDPE Blue Drum Regrind consists of HDPE regrind from blue drums scrap (Extrusion Grade Blow Moulding Grade). Cold Washed Clean without any contamination. Packed in jumbo bags for easy loading. We have convenient trade terms and the fastest delivery schedules. what is advantage of hdpe? This strengthening with its UV-resistance makes it ideal for piping and outdoor applications. Pipe grade sheet has the ability to withstand -220 to 180 degrees Fahrenheit. It�¢??s durable in most chemical interactions which make it useful in a lot of industrial applications. HDPE drums regrind 1.Hot water washed and no label, no any contaminant 2.dry and clear flakes 3.white,blue, red, yellow and so on 4.from crates, drums, pallets 5.MFI 0.03-0.1 Specification HDPE Blue Drum Regrind ITEM STANDARD Melt Flow Rate(g/10min) 0.1 Density(g/cm3) 0.95 Power Ash% 0.01 Tensile Strength(MPa) 22 Elongation At Break% 600 Environmental stress-cracking 1500 We are leading trading company, suppliers/exporter of best grade Plastic scraps in South Africa. We are one of the largest exporter of Plastic Scraps. We provide top grade quality to our Buyers. hdpe blue drum price There are several suppliers in the market with each supplier with their own price. The price varies between $300 and $500 per ton . At vitameta ltd we offer best price on bulk order purchase SPECIFICATION: Plastic Scraps Products PET Bottles Scrap LDPE Film Scrap PET Flakes Scrap HDPE Scrap Unvulcanised Rubber Scrap PET Film Rolls ABS Scrap PP Raw Materials EPS Block Scrap E-Waste Products: PVB film scrap LDPE rolls Baby Diapers PU Foams HDPE Granules Our HDPE Blue Drum Flakes are high in quality and relatively low price. We wish to make a long term scrap business deal with reliable and stable Plastic Scrap buyers from all over the world. Interested Plastic Scrap buyers, please contact us today for scrap prices and further details. We are waiting to hear from you soon. Thank you for your time. We offer products like Hdpe Milk Bottles Scrap, Hdpe Milk Bottle Regrind, Virgin Hdpe Granules / Recycled Hdpe Granules, Hdpe Blue Drum Regrind, and Blue PC water Bottle Scrap 99.99% Pure. We are wholesaler dealers of HDPE Blue Drum Regrind, HDPE blue drum flakes supplier. Adding to that We grind HDPE plastic, scraps and sell them domestically and Internationally. Furthermore, We can separate the regrind by color if you want that. Below are some of our HDPE regrind. Moreover, They are ground from crates, barrels, buckets, lids, pipes, plates, bottles and others. Lastly, We sell HDPE CLEAR/NATURAL REGRIND (CLEAN AND WASHED) contact us.

Black LDPE granules is produced from European origin post industrial 60/40 and 80/20 grade raw materials. Standard process includes crushing, washing in three separate pools, agglomerating and extruding in two stages. MFI Range (190 -C 2,16 kg ) 0,80-1,00 g/10 min at 190 C 2,16 kg Density 0,91-0,93 g/cm3.

Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.

We deal in best quality PVC White Regrinds, which are apt for numerous specifications of pipe, shoes sole, car, toys, bag, carpet, bathroom, medical, furniture, plug, electronic wire &cable series products and an assortment of PVC injection moulding products and so on. These products are applicable in various industries and are made of high quality material as well as advanced equipment. These PVC White Regrinds come with chemical resistance, high strength, uniform density, rigidity, high density and high melting point. Provided products are extremely demanded by our customers for their accurate composition, high effectiveness, high quality, and long shelf life. Product Details: Color White Application PVC PIPE Sources Grinding of PVC Pipes Shape Irregular Filler Content 4%, 8%, 10% Material PVC PIPE Grinding Usage PVC PIPE Min.Quantity 5,000 kgs. Pack Size varies We offer imported PVC pipe regrind with PHR < 7-8% in grey and white colours. This is regularly available. This is used along with virgin resin to bring down the cost. Mainly used for manufacturing pipes.

Specification item value Product name POE Full name Polyolefin Elastomer Grade Injection Grade. Extrusion Grade Sample Available Package 25kgs/bag Appearance Granules Application Wire &amp; Cable, Plastic Modifications, Composite Molding Applications MOQ 25 KG

Packaging &amp; delivery Package Type: Export Standard Packing / as per customerâ??s need Supply Ability Supply Ability 1000 Ton/Tons per Month

Product Description &amp; Properties PP L5E89 Resin Granule Test Method Value Unit Basic Properties Melt Flow Rate ISO 1183 3.5 g/10min Density ISO 1183 0.90 g/cm3 Mechanical Properties Tensile Strength ISO 527-2/50 34 MPa IZOD Notched Impact Strength ISO 179/1eU 32 kJ/m2 Thermal Properties Heat Deflection Temperature ISO 75-2/B 104 oC Flammability UL 94 HB

Grade- 100% Clean Packing- Compressed Density- 15~25%kg/m3 Quality- Excellent Form-� SCRAPS BALED MOQ- 10 Tons Supply Ability Supply Ability- 2000 Pack/Packs per Day

Specification  HDPE Unit Typical Value Mass density gcm 09410959 Melt flow Rate190 Centigrade 216kg g10min 10 Tensile yield strength MPa 190 Flexural modulus Mpa 965 Elongation break 400 Impact Embrittlement temperature Centigrade MAX 118 Dielectric Constant 100KHZ 232 1MHZ 231 Loss Tangent 100KHZ MAX 00001 1MHZ MAX 00001 Volume resistivity  OHMCM MIN 110 15 Description by Manufacturer High density polyethylene for nontoxic tasteless no smelly white particles melting point is about 130 C relative density of 0941 0960 It has good heat resistance and cold resistance chemical stability but also has high rigidity and toughness good mechanical strength Dielectric properties environmental stress cracking resistance sex also is good Application  HDPE high density PE is used in products and packaging such as plastic bags milk jugs detergent bottles margarine tubs garbage containers water pipes woven bag raincoat polyethylene monofilament woven yarn etc

GPPS The English name for polystyrene is Polystyrene, abbreviated as PS. PS is a thermoplastic non crystalline resin that is polymerized from styrene monomers and can be synthesized through various synthetic methods. In industry, bulk polymerization and suspension polymerization are mainly used. PS is mainly divided into general grade polystyrene (GPPS, commonly known as transparent benzene), impact grade polystyrene (HIPS, commonly known as modified benzene), and foam grade polystyrene (EPS). General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid.General grade polystyrene is a thermoplastic resin that is colorless, odorless, odorless, and glossy, transparent, bead like or granular solid. It is soluble in Aromatic hydrocarbon, chlorinated hydrocarbons, aliphatic ketones and esters, but can only swell in acetone. It can withstand the action of certain mineral oils, organic acids, alkalis, salts, lower alcohols, and their aqueous solutions. Low water absorption, able to maintain its mechanical properties and dimensional stability in humid environments. The optical performance is second only to acrylic resin. Excellent electrical performance, high volume and surface resistivity, and unaffected by temperature and humidity changes, as well as corona discharge. The radiation resistance is also very good. Its main drawbacks are brittle and easy to crack, low impact strength, poor heat resistance, and inability to withstand boiling water. It can only be used at lower temperatures and loads. Poor sunlight resistance and flammability. When burning, it emits black smoke and has a special odor.

Packaging Details 25 kg/bag Standard package: Inner (Plastic film) and outer: (Paper bag or woven bag). Or we can make it per customers requirement. Port   Shanghai

Polyethylene terephthalate (PET), chemical formula (C10H8O4)n, is made from dimethyl terephthalate and glycol transesterification or esterification of terephthalate and glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. It is a crystal type saturated polyester, which is a milky white or light yellow, highly crystalline polymer with smooth and glossy surface. It is a common resin in life, which can be divided into APET, RPET and PETG. It has excellent physical and mechanical properties in a wide range of temperatures, up to 120â??, and excellent electrical insulation. Even at high temperature and high frequency, its electrical properties are still good, but it has poor corona resistance, creep resistance, fatigue resistance, friction resistance and dimensional stability. Advantages: 1. Good mechanical properties, impact strength is 3~5 times that of other films, good folding resistance. 2 oil resistance, fat resistance, dilute acid resistance, dilute alkali resistance, resistance to most solvents. 3. Can be used in the temperature range of 55-60â?? for a long time, short-term use can resist 65â?? high temperature, can resist -70â?? low temperature, and high and low temperature has little impact on its mechanical properties. 4. Low permeability of gas and water vapor, and excellent resistance to gas, water, oil and odor. 5. High transparency, can block UV, good luster. 6. Non-toxic, tasteless, good health and safety, can be directly used for food packaging.