CPI -1507-150 is a polyalkylene glycol lubricant, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of this lubricant is to withstand dilution by hydrocarbon gases is particularly advantageous in liquid ring vacuum pump and centrifugal compressors handling high concentrations of hydrocarbon and gasoline vapors. CPI-1507-150 is a heat-stable polymer in the absence of oxygen. It is soluble in water. Test Procedure CPI-1507-150 Viscosity @ 40C, cSt, ASTM D445 115.1 Viscosity @ 100C, cSt 17.61 Viscosity @ 100F, SUS 587 Viscosity @ 210F, SUS 90.5 Viscosity Index, ASTM D2270 159 Density, lb/gal, 60F, ASTM D4052 9.27 Pour Point F (C), ASTM D97 22 (-5.6) Flash Point, C.O.C., F (C), ASTM D92 495 (257) Fire Point, C.O.C., F (C), ASTM D92 540 (282) Specific Gravity, ASTM D4052 1.11 These are typical values and are not intended for use in preparing specifications.
The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high-performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
" The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
"The CPI-1005 Series compressor lubricants are formulated using highly hydrocracked and is dewaxed mineral oil coupled with an additive package that is specifically designed to give superior performance in compressor systems. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, low pour point, and excellent shear stability ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1005 Series lubricants are especially advantageous in compressors operating with harsh chemical environments, particularly with sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Reciprocating compressors Sour gas applications Applications with harsh chemical environments Features and Benefits Corrosion protection (H2S) Resistance against H2S corrosion Low pour point Suitable for use in low temperature environments Excellent lubricity Increased efficiency, reduced cost of operation Shear stability Increased service life "
Minimum Order Size : 2 million Barrels shipped monthly on a 12 month contract. Renewable after 12 months we only deal with buyers directly and on SBLC. We can ship any amount over 2 million barrels T/T
we have about 200,000 tons per month we can send to any port we can deliver to any ship
Extensive range of Bitumen. All specifications can be fulfilled. We work with a variety of suppliers, notably in the Middle East, Asia and Africa. Subsequently we can provide a competitive price for your requirements and compare between suppliers. Please send an email to either: Ali@areteglobal.org or Ross@areteglobal.org Please specify the following: - Order Quantity - Product Specification - CIF/ FOB - If CIF, Destination Port - Packaging Requirements - Method of Payment - Intended Date of Delivery We look forward to hearing from you. The Arete Team
Specific Gravity: 0.8459 Water Content: 0.2% Vol. Max BSW: 0.6% Vol. Max Pour point: Below 40 Degree F. Max Salt: LB per 1,000 bbl, 12, Max Total Sulphur, wtK%: 0.14 Max Reid Vapor Pressure: 6.52 PSIG, Max Carbon Residue, wt%: 1.0, Max VINI, PPM wt:, 2.0 Vis, cst @ 37.8 Deg C: 3.47, Min Yield C1-C4 wt%: 2.10 Agents/Brokers/Buyers can always contact Ostus Ltd via Go4WB and provide us with your specification, terms and conditions with ICPO without exclusion of end-buyer's full details. We will not process any paperwork that is incomplete; if you decide to remove the contact details of the end-buyer from the paperwork. End-seller can only prepare a FCO/SPAs to end-buyer. Please, check on an International commodities pricing platforms for your Platts/DTD Net prices for BLCO. Seller or Title Holders prefer SBLC, L/C Payment documents and not IRDLC/DLC.
Nigerian LPG
Best Quality Liquified natural Gas from Nigeria. Kindly find the procedure below: PROCEDURE 1.Interested buyer shows interest in writing via this portal. 2 Buyer will then be issued contract upon receiving buyer's official expression of interest. 3. Buyer signs contract , attaching the following items: ( A) LoI - Letter of intent (B) Company's complete profile (C) proof of funds / affordability of industrial scale hydrocarbon purchases (D)Authority to allow seller verify (E) Data page of buyer's international passport ( F)Certificate of incorporation of buyer's company. 4.THE LOI, POF & ATV shall be addressed to any official address issued by seller, after buyer is ready with documents requested. 5. Final stages of contract to be mutually signed by buyer, seller and seller's lawyer in Nigeria. 6. Term of contract shall be 2 years or more, depending on buyers financial status.
PROCEDURE FOR CIF TO ANY WORLD SAFE PORT 1. Buyer signs and returns SPA with port of discharge, Agent details, ATB/NOR/ETA formats, with Business Registration Certificate, CIS, passport page of the international passport of the ordering customer (VERY NECESSARY FOR BANK"S DUE DILIGENCE copies BANKING PROCESS/CARGO ASSIGNMENT &DOCUMENTATION: 2. Buyer instruct their bank to send bank to bank PRE-ADVICE/RWA via Mt998 BRUSSELS SWIFT, Confirming Ready Willing and Able to issue the instrument (MT760 SBLC /MT700 DLC for ONE HUNDRED AND FIFTY MILLION UNITED STATES DOLLARS ($150,000,000.00) VIA SWIFT. 3. The Seller fiduciary Bank Responds Will reply the Pre-Advice stating their Readiness, Willingness and Able to receive the instrument. 4. The Buyer instruct his bank to Swift Irrevocable, Confirmable and Operative SBLC ICC STANDARD) Instrument in the sum of ONE HUNDRED AND FIFTY MILLION UNITED STATES DOLLARS ($150,000,000.00) for One Year and One (1) day For long term contract As payment guarantee in Sellerâ??s Approved international standard Verbiage Attached at APPENDIX "A" to Seller Nominated Fiduciary Account.5. Upon receipt and confirmation of the instrument, in seller fiduciary Bank , then seller nominate the vessel name to buyer .6. NNPC/Seller loads or assigns exclusive one vessel of (xxx million barrels) and cargo documents in seller/buyerâ??s name; Vessels captain issues NOR/ETA to buyer, shipping agent and inspectors. LIST OF DOCUMENTS TO BE PROVIDED AFTER LOADING OF CARGO AS PROOF OF PRODUCT (POP): A) Clean Ocean Bill of Lading, One (1) Original and three (3) copies B) Sellerâ??s Commercial Invoice, One (1) Original and three (3) C) Certificate of Origin issued by NNPC, One (1) Original and three (3) copies D) Certificate of Authenticity issued by NNPC, One (1) original and three (3) copies. E) Certificate of ownership F) Masterâ??s receipt for Samples G) Masterâ??s receipt for Documents H) Cargo Manifest I) Certificate of Quality & Certificate of Quantity from NNPC Loading Terminal J) NNPC Authority To Sell (ATS) Cargo Onboard 7. Vessels sails to buyer port of discharge. On arrival of the Vessel e-booking and radio announces (with recording) arrival to Discharge port authority in Buyerâ??s Name. After port clearance and payment of port charges by the buyer, Seller and Buyer Agent continue to maintain communication with vessel captain. 8. Then Captain issue Marine Authority to Board (MATB) to enable buyer's independent inspectors to come on board and perform Q/Q. 9-COMMERCIAL INVOICE:. Upon successful conclusion of Quality test analysis, Buyer Inspectors release Q &Q report to both parties, while Seller issue commercial invoice to the Buyer with exact Q/Q report figures.10. Buyer releases full payment for cargo to Seller's /agents nominated bank within 72hours after inspection against Final Quantity Report, Commercial Invoice and Cargo Documents by MT-103 (cash wire). 11. Seller authorizes Captain to discharge cargo into Buyers tank storage facility.
Best Quality LPG
Product description, including the following details - All hydrocarbon components especially Best grade LNG, BONNY LIGHT CRUDE OIL WITH LOW SULPHUR CONTENT AND JET FUEL A1. a. Name of product - Best grade LNG, BONNY LIGHT CRUDE OIL WITH LOW SULPHUR AND JET FUEL A1. b. Price of product - Jet Fuel A1 $93 PER BBL, BLCO AND LNG ARE NEGOTIABLE. c. Product origin - NIGERIA d. Key Specifications/Special Features - BEST GRADE e. Harmonization System (HS) Code : N/A f. Minimum Order Size : 10000 METRIC TONNES / BBL
BLCO for sale @ Platts minus -$4 PROCEDURE: BLCO FOB ROTTERDAM 1. The final agreed contract (SPA) in electronic version which is binding both Parties is mutually signed, sealed and registered in Sellers and Buyers banks within 1(one) 2(two) Banking Days after signing. Both banks must be Top50World listed and act under full banking responsibility, except Chinese banks, or others mutually agreed. Seller issues Proforma Invoice plus Platts daily price index and send with SGS / Storage Facility information (including contact details) for Buyer to verify Sellers Ownership verbally at tank storage or SGS no report just a call to them. *) The Buyer and the Seller sign Invoice. 2. Within 5 (five) banking days from contract been lodged in the banks, the seller shall deliver by express courier mail an envelope with original POP documents, to the buyer�´s Bank with electronic copy to the buyers email. The set of POP documents to be enclosed after receiving the RWA from the buyers bank are including the following documents: a. Commercial Invoice together with Copy of Platts price indication for the day of issue b. Copy of TSR c. Injection Report pumping in Tanks (SGS Q&Q) d. Fresh Q&Q issued by SGS or similar at Rotterdam e. The ATSC issued by NNPC as per delivered format f. The Certificate of Origin g. Confirmation for Tank farm, that Seller has full control on this Cargo to be issued by NNPC in Original h. Unconditional Dip Test Authorization i. ATV. j. The NNPC statement that the TSA (at least with 3 day´s free, if tanks are longer needed we have to pay for, three days are free to discharge), will be delivered after SPA is mutually signed and sealed k. Written consent from the Storage Company for the existing storage contract with the seller, to be assigned to the Buyer. The Insurance Policy in three copies assigned to the Buyer as beneficiary while an original to be lodged at the sellers bank, to be exchanged for payment 3. The Buyer dips the tanks 4. The Seller issue Final Invoice together with updated daily Platts index extract 5. Within 3 (three) banking days from receipt and verification of the POP documents Buyers bank issues to the Sellers bank the Ready, Willing and Able (RWA) to secure payment for the commodity 6. Within 3 (three) banking days Sellers bank after verification of RWA, transfers the set of payment documents and Buyers bank issue the Pay Order in DAP (Documents Against Payment) format 7. Buyer takes over the Commodity inside the Storage Tanks.
Alcohol Hand Sanitiser in IBC Drums 1000KG 70% Ethanol MSDS available Technical Spec Sheet available Ethanol Source confirmed IBC Loads available 1000KG Premix which should give you 20,000 bottles 50ml
price will be as per market rate minus agreed discount - Origin Nigeria - HS Code 270900 - MOQ 1,000 barrels - Packaging barrels