CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI-1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI-1507-32 Viscosity @ 40C, cSt, ASTM D445 31.72 Viscosity @ 100C, cSt 5.28 Viscosity @ 100F, SUS 165.0 Viscosity @ 210F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60F, ASTM D4052 9.43 Pour Point F (C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F (C), ASTM D92 350 (177) Fire Point, C.O.C.,F (C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications
CPI-1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507-150 is a polyalkylene glycol lubricant, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of this lubricant is to withstand dilution by hydrocarbon gases is particularly advantageous in liquid ring vacuum pump and centrifugal compressors handling high concentrations of hydrocarbon and gasoline vapors. CPI-1507-150 is a heat-stable polymer in the absence of oxygen. It is soluble in water. Test Procedure CPI-1507-150 Viscosity @ 40C, cSt, ASTM D445 115.1 Viscosity @ 100C, cSt 17.61 Viscosity @ 100F, SUS 587 Viscosity @ 210F, SUS 90.5 Viscosity Index, ASTM D2270 159 Density, lb/gal, 60F, ASTM D4052 9.27 Pour Point F (C), ASTM D97 22 (-5.6) Flash Point, C.O.C., F (C), ASTM D92 495 (257) Fire Point, C.O.C., F (C), ASTM D92 540 (282) Specific Gravity, ASTM D4052 1.11 These are typical values and are not intended for use in preparing specifications.
The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high-performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
" The CPI-1507 Series compressor lubricants are formulated using a premium polyalkylene glycol (PAG) base fluid combined with a high performance additive package. They are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent oxidative and thermal stability enabling the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1507 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1507 Series fluids are especially advantageous in high temperature and heavy gas stream applications due to their excellent thermal and oxidative stability and negligible hydrocarbon dilution. Applications and Compressor Type Flooded rotary screw compressors Heavy hydrocarbon gas stream applications Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Excellent lubricity Increased efficiency and reduced cost of operation Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
"The CPI-1005 Series compressor lubricants are formulated using highly hydrocracked and is dewaxed mineral oil coupled with an additive package that is specifically designed to give superior performance in compressor systems. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, low pour point, and excellent shear stability ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1005 Series lubricants are especially advantageous in compressors operating with harsh chemical environments, particularly with sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Reciprocating compressors Sour gas applications Applications with harsh chemical environments Features and Benefits Corrosion protection (H2S) Resistance against H2S corrosion Low pour point Suitable for use in low temperature environments Excellent lubricity Increased efficiency, reduced cost of operation Shear stability Increased service life "
Palm kernel shell, cold bitumen (non sanctioned countries only)..Exporter
Oil and gas, sulphur, copper.
We supply Jet A1 Fuel, Diesel EN590, Unleaded Gasoline and Fuel Oil... GERMAN ORIGIN, not re-documented.... Prices: Platts minus 7.5% ... We can supply as CIF, STS and Vessel Take Over. The Seller is a Title Holder.. SBLC MT760 is accepted as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER (not to a fiduciary).. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
Pipe fittings, oil lubricants, machinery, electrical components, oil & gas components.
This process is risk free to both buyer and reseller as banks stand behind performance. This reseller uses bank to bank procedures. After SPA signed, reseller's bank sends swift message to buyer's bank that under full bank responsibility the fuel is under contract and reseller is RWA to perform and complete sale to buyer per terms of the SPA. Buyer's bank responds with swift message that under full bank responsibility buyer is RWA to purchase the fuel and has the funds. Then reseller sends full POP, fresh SGS and 2% PB. Buyer responds by posting his DLC or SBLC. Lifts commence.
Aviation Kerosene colonial grade 54 jet fuel MOQ: 500,000 Barrels per Month MAX: 5,000,000 Barrels per Month Origins: Azerbaijan Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Jet A1 fuel MOQ: 500,000 Barrels per Month MAX: 5,000,000 Barrels per Month Origins: Azerbaijan Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Origin - Azerbaijan MOQ: 50,000 metric tons per month MAX: 500,000 metric tons per month Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Jet A1, JP54, EN590, D6, D2,
