Specifications of used rail scrap ( r-45 to r-65): Chemical specifications for scrap railway track metal: -1. Caduim cd :0.0006% 2. Chromium cr :0.6205% 3. Copper cu :0.2507% 4. Cobalt co :0.0046% 5. Lead pb :0.0149% 6. Molybdenum mo :0.003% 7. Nickel ni :0.141% 8. Tin sn :0.001% 9. Silver ag :0.0005% 10. Zinc zn :0.349% 11. Iron fe :75.21% 12. Carbon :0.04 % (maximum) rejection at 0.06% Impurities :23.33% (calculation) total 76.668% The following traces of elements should be avoided & should not be there:. Carbon :0.65 - 0.75% (in the railway track) Manganese :0.65 - 0.80% Sulphur :0.06% max. Phosphorus :0.035% Ash :0.01 max mass share
HMS1&2 (80:20) and HMS1 (100%) Steel scraps shall be considered free of alloys when the residual alloying elements do not exceed the following percentages: percent Nickel 0.45 Chromium 0.20 Molybdenum 0.10 Manganese 1.65 The combined residuals other than manganese shall not exceed a total of 0.60 percent. ISRI-CODES: 200 No. 1 heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. 201 No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 203 No. 2 heavy melting steel.* Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging. 204 No. 2 heavy melting steel.* Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared. 205 No. 2 heavy melting steel 3 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. 206 No. 2 heavy melting steel 5 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 60 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material.
Specifications: 1) Does not age 2) Has a wide range of practical temperature from -180oC ~ +260oC 3) Wax-like surface, to which anything hardly sticks 4) 2 kinds of PTFE rods available: a) Extrusion rod: i) Size: diameter 4 - 100mm ii) Length: 1m, 2m, or cut according to customer's demand b) Molding rod: i) Size: diameter 20mm (min.) - 600mm (max.) ii) Length: 300mm (max.) 5) Processing capacity: 8MT/month 6) Applications: electrical insulation, seal, anti-sticking materials Main properties: 1) Apparent density: 2.10 ~ 2.30g/cm3 2) Tensile strength (min.): 14.0MPa 3) Ultimate elongation (min.): 140%
Features: 1) PTFE sheet is manufactured with moulding method using PTFE granular resin 2) PTFE is the most chemical-resistant material of all known plastic 3) Does not age 4) Has the lowest coefficient of friction of all known solid materials, and a wide range of practical temperature from -180oC ~ +260oC 5) Applications: lining bearing pads, seals and electrical insulation Specifications: 1) Sizes: a) Thickness: 4 - 100mm b) Width x length based on customers' requirements 2) Equipment: a) Pressurer: 1set, max. pressure 4,200MT b) Working platform: 2.75 x 2.75m 3) Quality standards: a) Flat surface, no wave b) Plus tolerance (4 sides) Main properties:1) Apparent density: 2.10~2.30g/cm32) Tensile strength (min.): 15.0MPa3) Ultimate elongation (min.): 150%4) Dielectric strength (min.): 10kV/mm
Features:1) PTFE tubing is manufactured with ram extruding method using PTFE granular resin 2) PTFE is the most chemical-resistant material of all known plastic 3) With the best electrical properties among plastic materials 4) Applications: insulating cover for conductor, pipe for corrosive fluids Properties:1) Apparent dendsity: 2.10~2.30g/cm3 2) Tensile strength (min.): 18MPa 3) Ultimate elongation (min.): 230% Extruded Tube Min OD=0.5mm, Max OD=250mm, Length according to customer's request Molded Tube Min OD=30mm, Max OD=1000mm, Length: Min=100mm, Max=300mm
Used car We have drained car and trucks battery scraps in diffrent metric tons. All our product is washed and fully drained free from acide but still have leads inside. We do sell extracted lead in large and small quantity 20000 m/t
Cnc system Our company is based in bulgaria and weéäve been producing, supplying and fitting quality pvcu windows, conservatories, doors, blinds. And selling new and used window machinery -corner cleaners , groovers , millers, 1 , 2, 3, 4 head welders, saws . Copy router, , cnc system lines plus many more. We have in stock machinery from world famous brands such as- Elumatec , actual , someco , urban , haffner, wegoma, kombimatec, pertici , schuco, fom , emmegi . In case youéäre interested, and model that isnéät in stock it can be ordered. Please, feel free to contact us with any queries regarding our stock availability.
HMS 1&2 ISRI 201-206 Containerised
Scalebreaker water conditioner
Plastic raw materials All kinds of plastic raw materials are handled by us. Container shipments
Brake caliper assembly - Used for Japanese, Korean, European and American vehicles 250 pairs per case
CV Joint with or without boot kits and hub nuts. Suitable for Japanese, Korean, European and American vehicles 10 or 12 pcs per export case
Shock absorber for Korean & Japanese vehicles
Gildemeister CNC metal working machines
Automatic and CNC metalworking machines
Foam burger boxes Sq6 Re9 Re10 All cased 4x125's
Bitumen Rawmaterial (Grade 60/70) is used for making various oxidized bitumen products. This product is a basisc raw material for the waterproofing induteries and construction industry (Road construction and maintinace). This product can be delivered in Reconditioned Steel Drums, polybags, new steel drums of 200 Kgs or as per the instructions of the prospective buyer.
Sulphur ore Up to 5000 Mt can be supplied MT
Specs and FCO on applications Only buyers and direct mandate please MT
Paraffin wax
