Sharjah Coir Yarn Suppliers and Manufacturers

100% Polyester 30S/1 Ring Spun Yarn Raw White Polyester Yarn Material: 100% Polyester, 100% Polyetser Pattern: Raw white Technics: RING SPUN Yarn Type: Spun Feature: High Tenacity Use: Weaving, Knitting, Sewing Twist: Standard Evenness: Excellent Yarn Count: 30S/1 Place of Origin: IRAN Samples: free Package: yarns on cone

virgin polyester staple fiber 1.2-1.4d 38mm psf fiber Application: 1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn 2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C. Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc. Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.

PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA PVC CONTENT: 0.005% (50ppm) OTHER IMPURITY: 0.01% (100ppm) GLUE RESIDUE/GLUE: 0.02% (200ppm) GRADE A: PVC CONTENT:0.01% (100ppm) OTHER IMPURITY: 0.02% (200ppm) GLUE RESIDUE/GLUE:0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month

Commonly used as a binder fibre in core-sheath constructions, our Polyester Low Melt LMF (CoPET/PET) fibre bonds to other polyester fibres to produce wadding, insulation, filtration, automotive, and other products where heat is used to bond the fibres. This fibre is normally blended with solid polyester fibres or recycled materials.

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

High Tenacity or Medium Tenacity Recycle Polyester Staple Fiber (white or black fiber) (Nearing to Virgin fiber)

ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.

Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable. Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.

For the production of thin film and solar cell encapsulation substrates with high strength requirement The solar polyester film can protect the solar panel.

Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied. It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us. Li2O: 6.00%, Al2O3: 25.56%, SiO2: 63.72%, Fe2O3: 0.26% CaO: 0.17%

Lead, Zinc Ore from Nigeria

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet -Textile yarns.the end products are clothing, home textiles, decorative cloth, etc. -Nonwoven. the end products are wet wipes, masks, etc. -Filling.the end products are winter clothes, pillows, toys,etc.

Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement. Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials. Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.