We are manufacturers of Garden hose pipes. We have water hose pipes in Clear and Yellow colour ranging from 1/2 to 1 inches in 25 & 50 yards in length. Additionally, hose pipes are available in 1, 1 & 2 inches in 25 yards.
PetropipeFZE is one of the best carbon steel forged flanges supplier. We deliver various variety of flanges such as ASTM A105, LF2 , LF3 and LF6." We are one of the pioneer distributors and dealer of ASTM A105, LF2, LF3 and LF6 CARBON STEEL FORGED FLANGES, where a low inter pass temperature should be maintained. In general, preparation for welding should be similar to ASTM A105 Carbon Steel Forged Pipe Flanges and should include proper cleaning and handling. https://petropipefze.com/carbon-steel-forged-flanges/
PPR pipes plain PN20 SDR6 used for drinking water hot & cold domestic water applications manufactured according to DIN8077 DIN8078 & EN 15874 Price is per Meter Length, pipe comes in 4 meter standard
PPR pipes plain PN16 SDR7.4 used for drinking water hot & cold domestic water applications manufactured according to DIN8077 DIN8078 & EN 15874 Price is per Meter Length, pipe comes in 4 meter standard
PPR pipes plain PN16 SDR7.4 used for drinking water hot & cold domestic water applications manufactured according to DIN8077 DIN8078 & EN 15874 Price is per Meter Length, pipe comes in 4 meter standard
A reducer is a component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer: concentric and eccentric reducers. Concentric Reducers: The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1â?³ pipe transitions into a 3/4â?³ pipe and the top or bottom of the pipe doesnâ??t need to remain level. Unlike eccentric reducers, concentric reducers have a common centerline. Eccentric Reducer: An eccentric reducer is a fitting used in piping systems between two pipes of different diameters. They are used where the diameter of the pipe on the upstream side of the fitting (i.e. where the flow is coming from) is larger than the downstream side
Tee is a forged fitting used for splitting and changing the flow direction of the run pipe. Tee can be manufactured with butt weld extremities, socket extremities or threaded extremities. Tees are in two types: Equal Tee: The primary purpose of a Tee is to make a 90�° branch from the main run of pipe. â?¦ The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe. Reducing Tee: The reducing tee is used as the branch has a smaller diameter as the run-pipe.
An elbow provides a change in material flow direction. This adds pressure losses to the system due to impact, friction, and re-acceleration. As the product enters the inlet of the elbow, it typically continues moving straight ahead to the first impact zone. The product is then deflected at an angle toward the outlet of the elbow. The deflection angle is determined by the elbow design the productâ??s characteristics, the conveying velocity, and specific load. Grades & Specification Elbows ANSI B16.9 / MSS-SP75 DIN2605 Teil 1 / Teil 2 Types 45 DEGREE90 DEGREE 180 DEGREE GRADE ANSI B16.28 WPB / WPL 6 Radius SHORT RADIUS LONG RADIUS If the desired grade is not mentioned also, send us an inquiry.
Basically, an end cap will be applied, to shut down the end of a pipe. It is available for all pipe dimensions. They are used to close pipes of large diameters, and are similar to those used for constructing vessels. Grades & Specification ANSI / MSS DIN2617 / DIN28011
HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high pressure pipelines.
Moon cut pipes available Origin:- UAE Qunatity:-1000mt Size:-10-12mm
HDPE Pipes : Pentas supplies high density polyethylene hdpe pipes for size ranging from 16mm od up to 1,200mm od, pressure classification starts from 4bar up to 25 bars. Standard cutting lengths for smaller pipes up to 125mm od are 100m and 200m. Larger diameters have standard cutting length of 6m and 12m. Other pressure classes and cutting lengths outside the standard can be produced upon special request
Polypropylene Random (PPR) Pipes and Fittings Polyethylene Cross Linked (PEX) Pipes and Fittings
We provide PVC pipes and pipe fittings used for plumbing and electrical uses with different sizes based on order. If any inquiry is there then you can contact me and I can help you further. For bulk orders only. Ahmed
PermAlert ( A division of Perma-Pipe ) is a state-of-the-art microprocessor based Leak Detection System (LDS) for Fluids manufactured in USA using a unique TDR Technology and catering projects worldwide. PermAlert offers fast response monitoring & alarms on contact with liquids and locates location. This system is used in Data centers, Pumps, Water pipelines, Fuel pipelines, Generators, Storage Tanks and even in containment piping products like Water, Petrol, Diesel, Kerosene, Jet Fuel, Naptha and other hydrocarbons ( including acids and bases ) can be detected using our system.
