Iron Oxide
Iron Shredded Scarp
Product Description Steam hang Iron: is applicable to any quality clothing, curtains, blankets and plush toys, sofa,for kitchen descaling and disinfection.Because of the easy installation and operation, the normally cumbersome steps of ironing is omitted.It particularly suitable for clothing stores, average household, hotel and hotel use. Ironed under the natural state of suspension,with dual function that clothes its own gravity and high temperature steam (temperature at 98 degrees) to avoid the direct damage to the fabric, and can fast,and easily ironing the clothes, keep the clothes brightness and in shape Steam hang Iron- Operation is simple, turn on the switch, adjust the temperature which you need.It never burn the clothes,when you ironing you need to spray on the clothing folds, and support the use of creases clip brush, dust brush, ironing plate ï¼?with the "pull" and "pressure" and "spray" to flat the clothes,to make the clothes smoothly ,without mites bacteria and dust.
Used and Second quality railway tracks available from Saudi Arabia and Africa. Please get in touch for further details.
Excellent, safe and easy way to style curly, unrully, thick and kinky hair, leaving super shiny, sealed, glossy and bouncy. This Steam iron works as treatment, hydrating tha hair and needs to passed through the strands once. Must be used on perfectly dry hair with infused Vitamins or Mineral water.
Dear Sir/ Madam, We are pleased to offer you Hot Briquetted Iron Chips with Libyan origin. Below is the Chemical composition: CHEMICAL COMPOSITION: Iron (Fe) - 86% min Alumina (Al2O3) - 2.5 max Silica (SiO2) - 3.5 max Phosphorus (P) - 0.08 max Sulphur (S) - 0.08 max PHYSICAL SIZE (On Natural Basis) 6.5mm - 14mm: 70% min 14mm - 16mm: 20% max 16mm - 18mm: 10% max Analysis report is available upon request. Please let us know any interest. Thanks & Best Reagrds, Maria Lorena C. Sioson
Steam Iron With "OUI" logo, single color printing 220-240V 50/60Hz, 1800W Adjustable Temperature for different fabrics Dry/Spray/Steam/Burst steam/Self- Cleaning Anti-calc/Anti-drip/Auto shut-off - Horizontal position after 30 seconds - Vertical position after 8 minutes Water tank capacity: 320ML Dial thermostat control Temperature pilot light Soft Handle Soleplate: Ceramic Unit Size: L: 292 x W: 121 x H: 145 mm Solelate Size: L: 219 x W: 121 mm CE, CB, GCC, ROHS Approved
Cast Iron Scrap
Iron Ore Magnetite The key economic parameters for magnetite ore being economic are the crystallinity of the magnetite, the grade of the iron within the banded iron formation host rock, and the contaminant elements which exist within the magnetite concentrate. The size and strip ratio of most magnetite resources is irrelevant as a banded iron formation can be hundreds of meters thick, extend hundreds of kilometres along strike, and can easily come to more than three billion or more tonnes of contained ore. The typical grade of iron at which a magnetite-bearing banded iron formation becomes economic is roughly 25% iron, which can generally yield a 33% to 40% recovery of magnetite by weight, to produce a concentrate grading in excess of 64% iron by weight. The typical magnetite iron-ore concentrate has less than 0.1% phosphorus, 3â??7% silica and less than 3% aluminium. Currently magnetite iron ore is mined in Middle East,Australia& Canada Magnetite bearing banded iron formation is currently mined extensively in Brazil, which exports significant quantities to Asia, and there is a nascent and large magnetite iron-ore industry in Australia. We can supply Iron ore from lower grade of 40% Fe to 65% Fe. Magnetite is magnetic, and hence easily separated from the gangue minerals and capable of producing a high-grade concentrate with very low levels of impurities The grain size of the magnetite and its degree of commingling with the silica groundmass determine the grind size to which the rock must be comminuted to enable efficient magnetic separation to provide a high purity magnetite concentrate. This determines the energy inputs required to run a milling operation. Mining of banded iron formations involves coarse crushing and screening, followed by rough crushing and fine grinding to comminute the ore to the point where the crystallized magnetite and quartz are fine enough that the quartz is left behind when the resultant powder is passed under a magnetic separator. Generally most magnetite banded iron formation deposits must be ground to between 32 and 45 micrometers in order to produce a low-silica magnetite concentrate. Magnetite concentrate grades are generally in excess of 70% iron by weight and usually are low phosphorus, low aluminium, low titanium and low silica and demand a premium price.
Due to the high density of hematite relative to associated silicate gangue, hematite beneficiation usually involves a combination of beneficiation techniques. One method relies on passing the finely crushed ore over a slurry containing magnetite or other agent such as ferrosilicon which increases its density. When the density of the slurry is properly calibrated, the hematite will sink and the silicate mineral fragments will float and can be removed. We can supply good quantities of Iron ore from India,Middle East and CIS countries.
Metal Mesh Top Ironing Board Board size: 90x30cm Folded size: 122x30x7cm Open size:110x30x80cm Material: Steel Surface Treatment: Powder Coating Thickness of felt: 8mm Total height: 80cm, adjustable height Packing: Each pc shink
For Serious Buyers we can supply used rails with huge qty for any destination port contact with me for procedures
FOR SERIOUS BUYERS 1- The buyer sends an LOI to the seller. 2- The seller sends FCO to the buyer. 3- The seller and the buyer sign the FCO. 4- The buyer pay 1334$ for each million ton, which is the fee for fixing the price and reserve the quantity and it is refundable once the lc is made and confirmed. Note: This 1334$ for each million ton can be cancelled and avoided if FCO is also signed and stamped by the Ministry of Trade & the Saudi embassy in the Buyer country. 5- After payment or signing the FCO as mentioned in point # 4, the seller will issue the final contract (SPA) and Invoice and send it to the buyer. 6- The buyer will issue LC mt705 Pre-advise with complete details and terms and conditions. 7- After mutual confirmation of LC draft seller and buyer side, the buyer will make the LC MT700 (irrevocable, confirmed, revolving lc at sight). 8- The seller will send videos and instruct SGS people for inspection and also the seller will allow visiting buyers for visiting the factory and warehouse for their satisfaction. 9- After receiving of confirmed LC in the sellerâ??s bank, shipment will be effected. 10- The seller will present SGS-Report and shipping documents to the bank. 11- The buyer's bank will release the money against the shipping documents. 12- 20% Performance Bond from Seller side. 13- The stepwise process has been read & accepted and will be acted upon it. (Attached on Page # 2) we have ability to export huge qty to China and any other countries kindly serious buyer have to send LOI to start immediately
Used rails R50/65 , Available for sale required serious buyers
Commodity: Used Rail Second Quality Origin: Saudi Arabia Contract Quantity: 2,100,000 Metric Tons (MT) Provided Length: 1.00-1.50 Metres Loading Port: Jeddah or ASSAP Delivery Port: CIF ASWP SPECIFICATION & COMPOSITION R50 (51.67 Kg/m) Free size length â?? GOST 7173-75 R65 (64.72 Kg/m) Free size length â?? GOST 8165-75 Composition: C: 0.54-0.82%, SI: 0.18-0.40%, Mn: 0.60-1.50, S: 0.04 Max, P: 0.035% Max
We have Used rails , Origin UK & Saudi Arabia Minimum qty to order 1,000,000 mt per year price 192 usd /mt length cut 1m-2.8 m packing : bulk for serious buyers only , we need LOI from End Buyer
Product Description : Specifications Of Railways: R50/R60/R65: -Second Quality-railway Used -Rail Steel No. 1. Standard Section Tee Rails, Original Weight 50 Pounds Per Yard, Over Heavier, 120.50 M Rails. -Steel No. 2. Cropped Rail Ends, Standard Section, Original Weight 50 Pound Per Yard And Over 12.50 Meters Long. -28)b) (28c) Rail - Steel No.2 T - Rail Ends Standard Section - Original Weight 50 Pounds Per Yard And Over 12.50 Pounds Per Yard And Over 12.50 Meters - Rail, Steel No.3, Standard Section Fee, Gender, And / Or Guard Rails, Free From Frog And Switch Rails Not Cut Apart, And Contain No Manganese, Cast, Welds Or Attachment Any Kind Except Angle Bars Also Rails, Not Found And Without Radiation And Explosive Substance... -1.0m ( 1.0 ? 1.5m( Rail Ferrous -(R50/ R65 ) Chemical Composition Shall Be According To R65 GOST 8165.75 WEIGHT 64.72 KG /Meter C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE R50 GOST 7173.75 WEIGHT 51.67 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX -P = 0.035% AS - 0.01 MIX OF MASS SHARE Product origin ; Saudi Arabia Key Specifications/Special Features ; Second Quality R50-R65 Minimum Order Size and Packaging details : Total Quantity minimum 500,000 MT total, Bulk
We can supply you the USED RAILS/HMS 1-2 scraps you looking for on a regular basis. For a quick conclusion, It is an obligation that buyer visit yard for full inspection of the goods and sign final contract on the process. The origin of our materials is South Africa AND loading port is durban port. SUPPLY ABILITY We have available and able to supply you for the period of 5 years, USED RAILS R50-65 â?¢ R-50 (51.67 kg/m-GOST-7173-75) â?¢ R65 (64.72 kg/m GOST-8165-75) â?¢ Used Rail (ISRI 27-29). CHEMICAL COMPOSITION : International Standards as follows: R50 51,67 kg/m GOST 7173-75 C: 0.67- 0.8%; Mn: 0,75 - 1.05 %,Si: 0.13 - 0.28 %; P: max. 0.035 %;S: max. 0.045 %;Ar: max. 0.15 % R65 64.72 kg/m GOST 8165-75 C: 0.6 - 0.082 %; n: 0.75 - 1.05 % ;Si: 0.13 - 0.28 %; P: max. 0.035 %;S: max. 0.045 %;Ar: max. 0.15 QUANTITY :60,000MTW MONTHLY X 12 price: $240 aswp.
WE HAVE USED RAILS SAUDI ORIGIN PRICE 235 USD PAYMENT MT700
300,000 MT R50 -51.67 KG/M GOST 7173-75 C: 0.54 - 0.82 % MN: 0.60 - 1.05 % SI: 0.18% - 0.40%; P: 0.035 %S: MAX. 0.045 % AS: 0.01 % MIX OF MASS SHARE
