Product Description Chest Flat Work Ironer is another newly developed chest ironer being added into our product line recently. It has fixed roller and elevating chest. Rollers are fitted with imported spiral spring cushion support and felt padding is being tightly wrapped round the entire roller surface. The patented elevating mechanism of the chest unit allows even ironing pressure to be applied throughout the whole usable ironing surface and width of the chest, resulting in good flat ironing work. Only imported high-quality VFD controller is being chosen and incorporated into the control system. It allows reliable continuous smooth ironing speed adjustment. Utilises differential front and rear roller speed principle to give a "straightening pull effect" to the fabric during ironing so that good flat work results can be obtained. Well-polished chest surface finishing with large heating area to allow fast heat-up. Fully enclosed humidity control system improves working environment and physical look of the flat work ironer. Adjustable ironing pressure to suit different type of flat work items. High quality steam trap system which enhances heating efficiency resulting in higher output with lower operating cost. Different ironer capacities are available for selection. VIZ: Roller diameter ranging from 1000-800 and 500mm. Ironing width ranges from 2500mm to 3300mm. number of roller range from 1 to 2.
TMI 45.33.4.200425 - Flatwork Ironer (gas Heating Type) Product Description It is with speed adjusting motor and LS speed controller which with a large controlling range; It is driven by gears, reducing the twitter and noise generated by the sprocket; Conveyor belt is of exclusive brand which is with high temperature resistance and anti-static; It is with reasonable design .clothes become hard and flat after ironing.
TMI 45.35.2.200426 - Mushroom Shape Laundry Press Product Description This mushroom shape Laundry Press is ideal for finishing tapered areas,yokes,small areas of dresses,short sleeves,and other hard-to-reach parts. Two separate cylinders:one is to close the top portion,and another is to apply pressure.This keeps the efficiency of each cylinder at maximum for the longest possible time.Adopting the hydraulic buffer makes to close or open the die head smooth and reduce noise and vibration.The integral design of the gas circuit is very simple and easy. Pressing part is especially big and made of iron fiber and durable cotton cover as well as with colour coded push-button switch.Its features are beautifully designed, strong, high stability and providing ease of operation and maximum operator convenience.
TMI 45.36.3.200426 - Collar Sleeve Pressing Machine Product Description Collar Sleeve Pressing Machine An easy operating machine. After washing and dehydrating water,the clothes can be ironed directly. This machine is produced with a high-quality pneumatic element and reasonable pneumatic air route design. When operating,it is controlled by full compressed air ,no need external power supply. It always works stably, reliably and safely. To ensure the ironing quality,the work panel is made of 6mm polished stainless steel,the steam room is with an special and excellent structure.The design of steam circuit is very simple and efficient. That makes a fast rise of temperature and low heating consumption. In addition, this collar-sleeve pressing machine can be customized according to your requirement.
Product Details Performance and features: Newly developed automatic folder; an essential option for flat work ironer where automatic folding application is necessary. Precision folding capability, auto sheet width sensing and Meidi's advanced intelligent control system makes the equipment simple to operate and yet flexible in application. Equipment with user friendly MHI and operating program software. Reliable micro-processor-based control system with touch screen display panel. Two sets of independent motor drive systems each with VFD controller, folding speed of 50m/min. Total of five folds with two primary folds and three cross folds, Maximum width of 3000 x 3000mm. Self diagnostic fault alarm systems with display, safety operation control features, easy troubleshooting and daily maintenance. Anti-static control feature improves operational efficiency and stability.
Winding Machines
New Accessory Machines
Fuel Pump - Right Side For " Audi & Volkswagen " Part Number : 7L8919087B
High Pressure Fuel Pump For "Mercedes Benz" Part Number : A1330700001
high pressure and flow Fuel Pump Assembly case for "Audi & Volkswagen" Part Number : 3AA919051L
Engine Water Pump For " BMW " Part Number : 11517586925
Engine Oil Pump , Part Number : 94810701323
PVDF-C PUMP HEAD CERAMIC BALL full chemical compatibility PTFE DIAPHRAGM unique life expectancy and compatibility with most chemicals FLOW RATE MANUAL ADJUSTMENT 0÷100% MANUAL PRIMING VALVE WALL MOUNTING with fixing bracket (included) Flow rate : 5LPH Pressure : 8 BAR Power : 50Hz/220V Origin - Italy
Single unit upto 25 tons. 230 volts 1 phase / 440 v 3 phase 50 hz system.
Contact us for more information
UL/FM Approved 1000 Gallons Per Minute FIRE PUMP SYSTEM, 10 Bar, Product : UL/FM Approved 1000 GPM FIRE PUMP SYSTEM Brand : SFFECO (SAUDI FACTORY FOR FIRE EQUIPMENT CO.) Condition : Brand New YOM : 2023 Location : EXSTOCK, UAE. â?¢ Price is inclusive for : o Electric Pump Code SF-PMPULHESELEC092 â?? 1 SET o Diesel Pump Code SF-PMPULHESDIES092 -1 SET o Jockey Pump Code SF-PMPJOCKEY50HZ07 -1 SET o Electric Pump Controller Code SF-PMPCPGPY50HZ11 -1 SET o Diesel Pump Controller Code SF-PMPCPGPD02 -1 SET o Jockey Pump Controller Code SF-PMPCPJP350HZ04 -1 SET o Diesel tank Code SF-TANKDIESNONUL03 -1 SET o Battery Code SF-PMPBAT150AH03 -4 SET o Terminal Box SF-PMPST431 -1 SET o Flow Meter Code SF-VLVFM008 -1 SET o Pressure Relief Valve Code SF-PMPACCPRV02 -1* SET o Waste Cone Code SF-WCFLG004 -1* SET ITEM DESCRIPTION QTY COUNTRY OF ORIGIN SFFECO-UL/FM APPROVED END SUCTION (SFP 1000-54 EM-2G) ELECTRIC MOTOR DRIVEN SKID PUMP 1000 GPM @ 10 BAR COUPLED WITH UL LISTED ODP MOTOR. SUCTION AND DISCHARGE PRESSURE GAUGES, AND CASING RELIEF VALVE ARE INCLUDED. 1 UAE SFFECO-UL/FM APPROVED END SUCTION (SFP 1000-54 EM-2G) ENGINE DRIVEN SKID PUMP 1000 GPM @ 10 BAR COUPLED WITH UL/FM LISTED STALLION ENGINE. SUCTION AND DISCHARGE PRESSURE GAUGES ARE INCLUDED. 1 UAE GMAX PUMP VERTICAL MULTISTAGE JOCKEY 5.5HP, 2900 RPM, 380/415V, 50HZ, GMAX MODEL GVR 8-120 WITH BASE INCLUDED. 1 UAE CONTROL PANEL WITH NEMA2 ENCL. FOR ELECTRIC PUMP STAR DELTA OPEN STARTER MODEL GPY-125HP-50HZ-380/415V-3PH, TORNATECH. UL&FM APPROVED. 1 UAE CONTROL PANEL WITH NEMA2 ENCL. FOR DIESEL PUMP MODEL GPD-24-220 TORNATECH. UL&FM APPROVED. 1 UAE CONTROL PANEL WITH NEMA2 ENCL. FOR JOCKEY PUMP DOL STARTER MODEL JP3-5.5HP-50HZ-380/415V-3PH, TORNATECH. UL APPROVED. 1 UAE SFFECO TANK DIESEL 150 GALLON CAPACITY CYLINDRICAL SINGLE WALL FACTORY STANDARD 1 UAE BATTERY FOR DIESEL ENGINE DRIVEN PUMP FOR ENGINE CAPACITY 80HP AND ABOVE 4 KOREA TERMINAL BOX 60-125 HP FIRE PUMP 1 UAE FIRE PUMP FLOW METER SIZE 6" FM APPROVED FOR 1000 GPM TO 1250 GPM & BELOW 1 USA
morando lathe machine double headed clean condition
we are one of the leading exporters of used engineering machinery we have such type of product rolling machine bending machine shearing machine for further details contact with us thank you
Rolling machine maximart Length is 2500 mm Rolling cap is 6 mm Pre bending System hydraulic Con system
Safe ecological liquid degreaser, that effectively removes oils, fats, and grease from all types of surfaces such as: asphalt, concrete, plastics, glass, metals, terracotta, tiles, paving stones, fabrics, wood, and others. Patented in the EU, Certifications for Usage in the Food Industry, Biodegradability, Dermatological Test and Safety for Humans and the Environment Non-Toxic, Non-Alcoholic, Non-flammable and Eco-friendly, Effective and unrivalled degreaser German formula, Made in Poland