Potassium Humate is high quality potassium salt of humic acid extracted from natural high grade leonhardite. It is non-toxic, non-harmless and suitable for green agriculture and suitable for organic agriculture. It can be applied for agricultural and horticultural plants, fruit trees, ornamental plants, turf and pasture for soil and foliar & irrigating application. Packing: 25kg bags, 50kg bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Humic Acid: 60-70% K2O: 8-16% Water Solubility: 95-100% Size: 1-2mm, 2-4mm
Potassium Humate is extracted from natural high grade Leonardite. It is a high-quality plant stimulant and soil conditioner and can be applied in landscape and garden as well as for all agricultural and horticultural plants. It also could stimulate seed germination. With high concentration of humic acid, it could be stored and transported easily. Its solubility is excellent, could be formulated by different fertilizers and pesticides. Packing: 25kg bags, 50kg bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Humic Acid: 60-70% K2O: 8-16% Water Solubility: 95-100% Size: 50-100 mesh
This product is mainly composed of 18 amino acids as well as more than ten kinds of trace elements like zinc, copper, manganese, iron and boron, etc. It is of no toxicity and pollution. Amino acids 28%, chelated trace elements (Fe+Cu+Mn+Zn+B+Mg) 10% This product is all chelated organic trace elements, the absorptivity of which is 2~4 times higher than the inorganic trace elements. Packing: 25kg bags, 50kg bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance: Light Yellow Powder Total Amino Acid: 40% (NH4)2SO4: 50% pH: 5-6
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications. Usage: Paper-manufacturing, textile, dyeing, synthetic detergent, soap, tiles, ceramics and glazes. Packing: 50kg bags, 1250kg jumbo bags. Items Specification Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.002 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.55- 0.65 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts. Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid. Packing: 50kg bags, 1200kg jumbo bags. Item Specifications Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.004 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.85 1.1 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
Titanium dioxide, also known as Titanium (IV) or Titania, is a simple inorganic compound produced as a pure white powder with the molecular formula TiO2. Generally, it is available in two main crystal forms, which are rutile and anatase. Anatase is economical, easily dispersed in water-based systems, and a perfect opacifier. Untreated titanium dioxide (anatase) has TiO2 with a refractive index of 2.55. However, it is not commonly used in exterior (weather-exposed) paint applications except for highway paints. Application: Paint and Coating Industry, Paper Industry, Cosmetics Industry, Food Industry, Plastic Industry etc. Packing: 25 kg PP Bags
In its mineral form Bauxite, Aluminium is the most abundant metal in the earth's crust. Bauxite contains one of a variety of hydrated aluminium oxides (gibbsite, boehmite or diaspore), which are often expressed as Al2O3xH2O but are more commonly regarded as impure Al2O3. Bauxite is claylike and earthy, and ranges in colour from white to deep brown or red according to the nature and quantity of its components. The major impurities in Bauxite are iron oxides (goethite & hematite), silicon dioxide, the clay mineral kaolinite as well as small amounts of anatase (TiO2). Consequently, its composition varies considerably with alumina constituting from about 50% to about 70%. Aluminium content can be accurately and precisely determined over a broad analytical range simultaneously along with Si, Fe, Mn, Ti, Zr and up to 20+ other elements. Item Specification Color: Brown, yellow / light red Granularity: 0-1/1-3/3-5/5-8 mm, 200/325 mesh Application: Aluminium/Precision Casting/Refractory Density: 4.3 g/cm3 Hardness: 1-3 Fe2O3 Content: 3.0% Max CaO Content: 0.2 Max Package: 25 kg/bag Payment terms: T/T L/C
Zinc ore is most commonly found as zinc carbonate (ZnCO3), known as calamine or smithsonite. It generally occurs as rounded, crystalline crusts or granular, honeycombed masses that have a vitreous or pearly luster and are typically dirty brown or grey in colour. Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a shiny-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. In some respects, zinc is chemically similar to magnesium: both elements exhibit only one normal oxidation state (+2), and the Zn2+ and Mg2+ ions are of similar size. Zinc is the 24th most abundant element in Earth's crust and has five stable isotopes. The most common zinc ore is sphalerite (zinc blende), a zinc sulfide mineral. The largest workable lodes are in Australia, Asia, and the United States. Zinc is refined by froth flotation of the ore, roasting, and final extraction using electricity (electrowinning). Item Specification LE: 60.244% Zn: 32.767% Pb: 4.403% Fe: 2.244% Ti: 0.225% Hf: 0.073% V: 0.03% Zr: 0.014% Moisture: >3
The main copper sulphide minerals are chalcopyrite (CuFeS2) chalcocite (Cu2S), covellite (CuS), bornite (Cu5FeS4), tetrahedrite ((Cu,Fe)12Sb4S13) and enargite (Cu3AsS4). The largest source of copper is from porphyry ore deposits in which one or a combination of the minerals occurs. A typical copper sulphide ore contains various levels of iron sulphide types that generally include pyrite (FeS2) and pyrrhotite (Fe1-xS). Often gold and silver are present which may either be associated with the sulphides or are free. The gangue particles can consist of a range of silicate minerals from quartz to talc and clays. Item Specification CR2O3: 42% Basis: 40% Min CR/FE Ratio: 1.35:1 MGO: 14% Max AL2O3: 16% Max SIO2: 10% Max P: 0.01% Max S: 0.01% Max Size 0-2 MM: (95% Min) Moisture at 105C or 110C: 8% Max
Dead burned magnesite 97% is a chemical substance, which means that when magnesite is calcined at 1800C, carbon dioxide completely escapes, and magnesium oxide forms a dense block of periclase. This dead burned magnesite has a high degree of fire resistance. Its main component is magnesia, which is made of natural special magnesite magnesia through flotation purification, light burning, fine grinding, high pressure ball pressing, and ultra high temperature oil shaft kiln calcination. Application: Dead burned magnesite 97% are made from sorted super grade natural magnesite through sections including float concentration, calcination, fine grinding, high pressure briquetting and ultra high temperature sintering in heavy oil shaft kilns. They are good quality materials for making magnesia bricks and monolithic refractories. Packing: Jumbo bag(or according to the customer requirement)
When naturally occurring magnesium carbonate(magnesite) is fired at around 800-1500 it becomes what is known as ''caustic calcined magnesite''. The resulting magnesium oxide grains have the outer form of the magnesium carbonate and depending on the firing temperature are porous and more or less reactive due to their large inner surface area. It's also called industrial grade caustic calcined magnesite Application: In the production of magnesium salt, MgO oxide is used as raw material to react with acid. In Refractory, Mgo is used as the Refractory of crucibles. In energy plants, MgO is used to remove sulfur trioxide that are harmful to plants and the environment. In the rubber and plastic industry, Mgo is used as Filler, acid acceptor, anti-coking component and curing acid. Packing: 50kg pp bag with PE coating outside/ PE inner bag, 1250kg Jumbo bag.
Gypsum powder is a superior construction material due to its ability to create an extremely comfortable and aesthetic ambience. It is a natural material, completely odourless, and is easily available in nature. Gypsum is a material that possesses a natural mechanism to perfectly balance indoor climate and humidity. There are a lot of exceptional features of gypsum products that make them perfect for indoor finishing. Gypsum products are environment-friendly and fire-resistant. We offer thermal as well as acoustic insulation. Application: Gypsum panel or building plasters, mould or statutes, grout of marble, clay and ceiling tiles, color additive and also act as an additive to other products. Packing: 25kg, 50kg and 1000kg jumbo bag. Item Specification Color White Initial Setting Time: Minutes 8- 12 Final Setting Time: Minutes 13 -18 Water Stucco Ratio %: 70 - 75 Compressive Strength: N/mm2 15 - 17 Flexural Strength N/mm2: 5 - 6 Fineness %: 200 mesh Sieve pass > 96 CASO4H2O %: > 97 Sodium Chloride %:
PVC resin is a polymer compound formed by polymerization of vinyl chloride monomer (VCM), and its structure unit is [CH2-CHCL]n. polymerization degree is usually 590-1500. According to the content of residual polyethylene monomer in PVC resin can be divided into: industrial grade, food hygiene grade and medical grade. The appearance of PVC resin is white powder. PVC resin SG3 SG5 SG8 is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydrochloric acid, 90% sulfuric acid, 60% nitric acid and 20% sodium hydroxide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80�°C, it starts to decompose and change color at 130�°C, and precipitate HCI. Application: It is widely used in the production of polyvinyl chloride boardy leatheroid, paint and adhesive agents, paint and adhesive. Packing: 25kgs two layers draft paper bag or 1000kgs PP bag.
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc . Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is renowned Exporters and Suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to several countries of world such as India, China, Bangladesh, South Africa, Kenya, Nigeria, Denmark, Qatar, Saudi Arabia, Peru, Philippines, Panama, Oman, Morocco, Malaysia, Laos, Vietnam , Indonesia, Greece, Ecuador, Egypt, Bulgaria, Australia, Chile etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is the Largest Exporters of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to Bangladesh in very Large Quantities. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.
Eltee DMCC is the Top Leading Exporters and International Suppliers of High Quality Soda Ash Dense in world. We supply Soda Ash Dense of high quality to more than 40 countries of world such as India, Japan, South Korea, Vietnam, Kenya, Australia, Egypt, Ghana , Uganda, Tanzania, Belgium, Botswana, Chile, Czech Republic, Ecuador, Guyana, Indonesia, Kuwait, Saudi Arabia, Oman, Morocco, Norway, Philippines, Rwanda, Senegal, South Africa, Tunisia, Zambia, Poland, Mexico etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.
Available Yellow Sulphur Origin Turkmenistan Mass Of Fraction Of Sulfur Not Less Than 99.98%
Bitumen 40/50 represents another grade of bitumen available to our clients, catering to a diverse range of project requirements. As with our other products, the specifications of Bitumen 40/50 are meticulously documented and certified by accredited entities such as SGS or other reputable third-party inspection companies. This rigorous quality assurance process ensures that our clients receive a product that adheres to industry standards and meets their specific needs with reliability and consistency.
